Metallized Polypropylene Film Capacitors - AC use AMPP Series (Radial Dipped) MERITEK FEATURES • Very low loss, excellent frequency and temperature characteristics, high insulation resistance High reliability due to self-healing properties Non-inductive construction Flame retardant epoxy resin coating (In compliance with UL 94V-0) • • • SPECIFICATIONS 1. Operating temperature: -40oC to +105oC 2. Capacitance range: 3. Capacitance tolerance: 0.01μF to 1.0μF ±5%(J), ±10%(K), ±20%(M) 4. Rated voltage: 250VAC, 400VAC 5. Dissipation factor: 6. Insulation resistance: 0.1% max. at 1KHz, 25oC C R ≤ 33μF, ≥50000MΩ C R > 0.33μF, ≥16000 s AMPP *Voltage derated at operating temperature >85oC PART NUMBERING SYSTEM AMPP 223 K 400VAC are constructed with metallized polypropylene film dielectric, tinned copper leads, and flame retardant epoxy resin coating. They are suitable for use in AC circuits wherein low loss and small inherent temperature rise are important, e.g. across-the-line. Meritek Series Capacitance CODE ( pF ) ( nF ) ( μF ) 103 10,000 10 0.01 104 100,000 100 0.1 105 1000 1 Tolerance CODE Tolerance (%) J ±5 K ± 10 M ± 20 Rated Voltage 250VAC 400VAC Dimensions in millimeters (mm) Rated Voltage DIM CAP(μF) 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 250VAC W 12.5 13.0 12.5 12.5 12.5 15.5 15.5 15.5 15.5 15.5 20.0 20.0 20.0 20.0 20.0 26.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0 36.0 36.0 H 11.0 10.5 11.0 11.0 12.0 12.0 12.5 13.0 13.5 14.5 14.0 15.5 16.0 17.0 17.5 17.5 18.0 19.0 20.0 19.5 21.0 22.0 23.5 24.0 24.5 T 7.0 6.0 6.5 7.0 8.0 6.5 6.5 7.5 8.0 8.5 7.0 8.0 8.5 9.5 10.0 8.5 9.5 10.0 11.0 10.5 11.0 12.0 13.0 13.5 13.5 Specifications are subject to change without notice. 400VAC P± 1.5 10.0 8.5 8.5 8.5 8.5 11.0 11.0 11.0 11.0 11.0 15.0 15.0 15.0 15.0 15.0 21.0 21.0 21.0 21.0 26.0 26.0 26.0 26.0 31.0 31.0 dØ 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 W 15.5 15.5 15.5 15.5 15.5 20.0 20.0 20.0 20.0 20.0 26.0 26.0 26.0 26.0 26.0 26.0 31.0 31.0 31.0 36.0 36.0 H 11.5 12.0 12.5 13.0 13.5 13.0 13.5 14.0 15.5 17.0 16.0 17.0 17.5 18.5 19.0 20.0 21.5 23.0 24.0 24.5 24.5 T 6.0 6.5 7.0 7.5 8.0 7.5 7.5 8.0 9.5 9.5 8.0 9.5 10.0 11.0 12.0 12.5 11.0 12.5 13.5 13.5 14.0 P± 1.5 11.0 11.0 11.0 11.0 11.0 15.0 15.0 15.0 15.0 15.0 21.0 21.0 21.0 21.0 21.0 21.0 26.0 26.0 26.0 31.0 31.0 dØ 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 rev.6a