Polypropylene Film Capacitors TPPN Series (Axial Tubular) MERITEK FEATURES • • Negative temperature coefficient can be used in critical circuits Excellent long-term stability and high reliability SPECIFICATIONS 1. Operating temperature: -40oC to +85oC 2. Capacitance range: 3. Capacitance tolerance: 0.001μF to 0.47μF ±5%(J), ±10%(K), ±20%(M) 4. Rated voltage: 100VDC, 250VDC, 400VDC, 630VDC 5. Dissipation factor: 0.1% max. at 1KHz, 25 oC 6. Insulation resistance: >50000MΩ PART NUMBERING SYSTEM TPPN TPPN 103 J are constructed with polypropylene film dielectric, aluminum foil electrodes, tinned copper leads, an outer wrapping of polyester film tape, and epoxy resin end seals. They are ideal for coupling and bypassing in precision timing and oscillation circuits . 2A Meritek Series Capacitance CODE ( pF ) ( nF ) ( μF ) 102 1,000 1 0.001 103 10,000 10 0.01 104 100,000 100 0.1 105 1000 1 MIN 35mm Tolerance CODE Tolerance (%) J ±5 K ± 10 M ± 20 MAX L Rated Voltage CODE 2A 100V 2E 250V 2G 400V MIN 35mm MAX OD d 2J 630V Tape & Reel / Tape & Ammo available for diameter 10mm or smaller Please contact factory for part numbers Rated Voltage Dimensions in millimeters (mm) 100VDC 250VDC 400VDC 630VDC DIM. CAP(uF) OD L dØ OD L dØ OD L dØ OD L dØ 0.001 5.0 14.0 0.6 5.0 14.0 0.6 5.0 14.0 0.6 5.0 14.0 0.6 0.0015 5.0 14.0 0.6 5.0 14.0 0.6 6.0 14.0 0.6 7.0 14.0 0.6 0.0022 5.0 14.0 0.6 5.0 14.0 0.6 5.0 14.0 0.6 7.0 14.0 0.6 0.0033 5.0 14.0 0.6 5.0 14.0 0.6 6.0 14.0 0.6 7.0 14.0 0.6 0.0047 6.0 14.0 0.6 6.0 14.0 0.6 7.0 14.0 0.6 8.0 14.0 0.6 0.0068 6.0 14.0 0.6 6.0 14.0 0.6 8.0 14.0 0.6 8.0 16.0 0.6 0.01 6.0 14.0 0.6 7.0 14.0 0.6 8.0 16.0 0.6 10.0 16.0 0.6 0.015 7.0 14.0 0.6 7.0 16.0 0.6 9.0 16.0 0.6 9.0 21.0 0.8 0.022 7.0 14.0 0.6 8.0 16.0 0.6 10.0 16.0 0.6 11.0 21.0 0.8 0.033 8.0 14.0 0.6 10.0 16.0 0.6 12.5 21.0 0.8 13.0 21.0 0.8 0.047 9.0 16.0 0.6 10.0 21.0 0.6 14.0 21.0 0.8 13.0 27.0 0.8 0.068 11.0 16.0 0.6 11.0 21.0 0.8 12.0 27.0 0.8 15.0 27.0 0.8 0.10 10.0 21.0 0.8 12.0 27.0 0.8 14.0 27.0 0.8 16.0 32.0 0.8 0.15 12.0 21.0 0.8 14.0 27.0 0.8 17.0 27.0 0.8 18.0 32.0 0.8 0.22 13.0 27.0 0.8 16.0 27.0 0.8 18.0 32.0 0.8 0.33 15.0 27.0 0.8 15.0 32.0 0.8 20.0 32.0 0.8 0.47 16.0 32.0 0.8 19.0 32.0 0.8 Custom sizes and lead spacing available upon request Custom values and tolerances available upon request Specifications are subject to change without notice. rev.6a