List of keypad commands

Vista 10SE
Keypad/Console Command Summary
Command / Function Name
Entering Program Mode
Syntax
Arming Away
Installer Code + 8 + 0
(default = 4111)
Code + 2
Arming Stay
Code + 3
Arming Instant
Code + 7
Arming Maximum
Code + 4
Disarming
Code + 1
Bypass
Code + 6 + Zone #
Comments/Notes
If this does not work then power down & up then hit
* + # simultaneously within 50 seconds.
This arming mode gives you exit & entry delays &
arms perimeter & interior zones.
This arming mode gives you exit & entry delays &
arms perimeter zones.
This arming mode gives you exit & no entry delay
& arms perimeter zones.
This arming mode gives you exit but no entry delay
& arms perimeter & interior zones.
Always Enabled
Quick Forced Bypass
Code + 6 (wait 2 seconds)
If enabled in field *23
Chime Mode
Code + 9
Chimes on perimeter & entry/exit zones
Site-initiated download
Code + # +1
Calls modem at offsite computer
System Test
Code + 5
Code + 1 exits
Transmitter ID Sniffer Mode
Code + # + 3
Go/No Go Test Mode
Code + # + 4
Displays all numbers, which disappear when
transmision is received, to exit hit code + 1
Puts receiver in ½ gain mode, to exit hit code + 1
House ID Sniffer Mode
Code + # + 2
Adding User Codes
Master code + 8 + user 2-6 + new
code
Master code + 8 + 8 + Duress
code
Installer Code + 8 + 2 + New
Code
Master code + 8 + 2 + new code
+ new code
Adding Duress Code
Adding a Master Code
Changing master code
Allows you to check the house ID on wireless
devices.