PI6W-1P interface sockets 184 • Socket PI6W-1P without electronic • Co-operate with relays: RM699V - electromagnetic, RSR30 - solid state ❶ • The input voltage complies with the voltage of the operational relay applied • 35 mm DIN rail mount, EN 50022 • Adapted for the co-operation with interconnection strip type ZG20 • Accessories: description plates PI6W-1246 • Recognitions, certifications, directives: Output circuit Number and type of contacts / outputs Max. voltage Max. load Rated current AC/DC AC1 1 C/O, 1 NO depending on the relay applied 250 V / – 6 A / 250 V AC 6A Insulation Insulation category Rated surge voltage Overvoltage category Insulation pollution degree Dielectric strength • input - output • input - output Input - output distance • clearance \ creepage C250 4 000 V AC III PN-EN 60664-1 3 50/60 Hz, 1 min. 4 000 V AC 6 000 V AC 1,2 / 50 µs, surge voltage ≥ 6 mm \ ≥ 8 mm General data Dimensions (L x W x H) Weight Ambient temperature • storage • operating Protection category Environmental protection Connections diagram 98,5 x 6,2 x 85,5 mm 40 g -40...+70 oC -40...+55 oC IP 20 RTI PN-EN 116000-3 -40...+60 oC 12, 24 V DC Dimensions ❶ ❶ ❶ Selection of operational relay RM699V or RSR30 which is not included in the equioment shall be consulted with Relpol S.A. Ordering codes Ordering codes: PI6W-1P. Mounting Sockets PI6W-1P are designed for 35 mm DIN rail mount, EN 50022. Maximum size of wires 1 x 2,5 mm2 (1 x 14 AWG). Rated contactability 2 x 1,5 mm2 (2 x 16 AWG). Maximum screw torgue: 0,3 Nm. PI6W-1P are adapted for the co-operation with interconnection strip type ZG20. Description plates of PI6W-1246 type are offered for PI6W-1P sockets (see pages 176-177). www.relpol.com.pl Export Sales Department Phone +48 68 47 90 832 • Marketing Department Phone +48 68 47 90 900