G5Z 005

Part No: G5Z-005 – G5 Series
Tilt Switch - Mercury
Features:
* Insulated
* Form: NO/NC/SPST/Mount dependant
* Angles Referenced from Horizontal
* Hermetically Sealed
* Small Package Size
* Narrow Included Angle
* High Current Capability
* Low Contact Resistance
* Long Life
12.00
Drawing dimensions in inches.
Tilt switches “make” when the electrode is tilted below horizontal and
“break” when tilted above the horizontal. Total travel from “make” to
“break” is the “Maximum included angle” shown below. The
component to which the switch is attached must have a total tilt angle
greater than the “Maximum included angle” for proper operation.
Maximum included Angle* :
11º
* Switching occurs when body axis is near horizontal
Switch Ratings:
Max Switching Voltage
Max Switching Current
240V
Initial Contact Resistance (Max).
Stand Off Voltage (contact to contact)
(contact to ground)
Operating Temperature
Storage Temperature
Typical number of operations at specified load
G-Force Activation G-Level/Range
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (less leads). Inches / Milliimeters:
Maximum Diameter. Inches / Millimeters:
Materials:
Lead Wire Type
Lead wire length/skive/termination
3 milli Ohms
1500V
5000V
-38º to 220ºF / -38º to 105ºC
-40º to 356ºF / -40º to 180º C
10,000,000
N/A
Finish:
Cotton Insulated
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
120VAC / 7A, 240VAC / 5A : 120VDC / 5A, 240VDC / 4A :
Tungsten 240V / 700W: 0.33HP / 480VAC, 0.25HP / 240 VDC
4.45 / 2.02
1.81 / 46.0
0.52 / 13.7
#20AWG Silicone Insulated
12 in / Ring Terminal with 0.17 dia. hole
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: +1-574-295-6330 Fax: +1-574-293-8013
Email: [email protected]
http://www.aecsensors.com
G5Z-005 200606