150D Vishay Sprague Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead FEATURES • These high performance, hermetically-sealed TANTALEX® capacitors have set the standard for solid-electrolyte tantalum capacitors for more than three decades. • High capacitance, low DCL, low dissipation factor and exceptional operating stability. • Performance and reliability have been proven in commercial, industrial and military applications. • Available in four case codes and capacitors and are supplied with plastic-film insulation. • Terminals are solid, tinned nickel wire leads. • The Military equivalent to the 150D is the CSR13 which is qualified to MIL-C-39003/01. PERFORMANCE CHARACTERISTICS At + 85°C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings Tables. At +125°C: Leakage shall not exceed 15 times the values listed in the Standard Ratings Tables. Life Test: Capacitors shall withstand rated DC voltage applied at + 85°C for 2000 hours or derated DC voltage applied at + 125°C for 1000 hours. Following the life test: 1. DCL shall not exceed 125% of the initial requirement. 2. Dissipation Factor shall meet the initial requirement. 3. Change in capacitance shall not exceed ± 5%. Operating Temperature: - 55°C to + 85°C. (To + 125°C with voltage derating.) Capacitance Tolerance: At 120 Hz, + 25°C. ± 10% standard. ± 5% available as special. ± 20%, Dissipation Factor: At 120 Hz, + 25°C. Dissipation factor, as determined from the expression 2πfRC, shall not exceed the values listed in the Standard Ratings Tables. DC Leakage Current (DCL Max.): At + 25°C: Leakage current shall not exceed the values listed in he Standard Ratings Tables. DIMENSIONS in inches [millimeters] 1.500 ± 0.250 1.500 ± 0.250 [38.10 ± 6.35] L D [38.10 ± 6.35] DIA. 0.047 [1.19] MAX. SOLID TINNED 0.125 [3.18] MAX. NICKEL LEADS J MAX. WITH INSULATING SLEEVE* CASE CODE LEAD SIZE AWG NO. NOMINAL DIAMETER 0.422 [10.720] 24 0.020 [0.51] 0.474 ± 0.031 [12.04 ± 0.79] 0.610 [15.490] 24 0.020 [0.51] 0.289 ± 0.016 [7.34 ± 0.41] 0.686 ± 0.031 [17.42 ± 0.79] 0.822 [20.880] 22 0.025 [0.64] 0.351 ± 0.016 [8.92 ± 0.41] 0.786 ± 0.031 [19.96 ± 0.79] 0.922 [23.420] 22 0.025 [0.64] D L J (MAXIMUM) A 0.135 ± 0.016 [3.43 ± 0.41] 0.286 ± 0.031 [7.26 ± 0.79] B 0.185 ± 0.016 [4.70 ± 0.41] R S *When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body. www.vishay.com 10 For technical questions, contact [email protected] Document Number: 40015 Revision 11-Jun-03 150D ® Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague ORDERING INFORMATION 150D MODEL 224 CAPACITANCE X0 CAPACITANCE TOLERANCE 006 DC VOLTAGE RATING AT + 85°C A CASE CODE 2 STYLE NUMBER T PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20% X9 = ± 10% *X5 = ± 5% *Special order This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. See Ratings and Case Codes Table. 2 =Insulated sleeve. T = Tape and Reel STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER CAP. TOL. ± 20% PART NUMBER CAP. TOL. ±10% MAX. DCL @ + 25˚C (µA) MAX. DF @ + 25˚C 120 HZ (%) 6 WVDC @ + 85°C, SURGE = 8 V . . . 4 WVDC @ + 125°C, SURGE = 5 V 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 A A A A A A A A A A A A A A A A A A A B B B B B B B B B B B R R R R R R S S S Document Number: 40015 Revision 11-Jun-03 150D224X0006A2 _ 150D334X0006A2 _ 150D474X0006A2 _ 150D684X0006A2 _ 150D105X0006A2 _ 150D155X0006A2 _ 150D225X0006A2 _ 150D335X0006A2 _ 150D475X0006A2 _ 150D685X0006A2 _ 150D106X0006B2 _ 150D156X0006B2 _ 150D226X0006B2 _ 150D336X0006B2 _ 150D476X0006B2 _ 150D686X0006R2 _ 150D107X0006R2 150D127X0006R2 150D157X0006R2 150D187X0006R2 150D227X0006S2 150D277X0006S2 150D337X0006S2 150D224X9006A2 150D274X9006A2 150D334X9006A2 150D394X9006A2 150D474X9006A2 150D564X9006A2 150D684X9006A2 150D824X9006A2 150D105X9006A2 150D125X9006A2 150D155X9006A2 150D185X9006A2 150D225X9006A2 150D275X9006A2 150D335X9006A2 150D395X9006A2 150D475X9006A2 150D565X9006A2 150D685X9006A2 150D825X9006B2 150D106X9006B2 150D126X9006B2 150D156X9006B2 150D186X9006B2 150D226X9006B2 150D276X9006B2 150D336X9006B2 150D396X9006B2 150D476X9006B2 150D566X9006B2 150D686X9006R2 150D826X9006R2 150D107X9006R2 150D127X9006R2 150D157X9006R2 150D187X9006R2 150D227X9006S2 150D277X9006S2 150D337X9006S2 For technical questions, contact [email protected] 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 3.0 3.0 3.0 6.0 6.0 6.0 6.0 10.0 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 www.vishay.com 11 150D Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µF) MAX. DF @ + 25°C 120 Hz (%) 10 WVDC @ + 85°C, SURGE = 13 V . . . 7 WVDC @ + 125°C, SURGE = 9 V 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 A A A A A A A A A A A A A A A A A B B B B B B B B B B B R R R R R R S S S 150D224X0010A2 — 150D334X0010A2 — 150D474X0010A2 — 150D684X0010A2 — 150D105X0010A2 — 150D155X0010A2 — 150D225X0010A2 — 150D335X0010A2 — 150D475X0010A2 — 150D685X0010B2 — 150D106X0010B2 — 150D156X0010B2 — 150D226X0010B2 — 150D336X0010B2 — 150D476X0010R2 — 150D686X0010R2 — 150D107X0010R2 150D127X0010R2 150D157X0010S2 150D187X0010S2 150D227X0010S2 150D224X9010A2 150D274X9010A2 150D334X9010A2 150D394X9010A2 150D474X9010A2 150D564X9010A2 150D684X9010A2 150D824X9010A2 150D105X9010A2 150D125X9010A2 150D155X9010A2 150D185X9010A2 150D225X9010A2 150D275X9010A2 150D335X9010A2 150D395X9010A2 150D475X9010A2 150D565X9010B2 150D685X9010B2 150D825X9010B2 150D106X9010B2 150D126X9010B2 150D156X9010B2 150D186X9010B2 150D226X9010B2 150D276X9010B2 150D336X9010B2 150D396X9010B2 150D476X9010R2 150D566X9010R2 150D686X9010R2 150D826X9010R2 150D107X9010R2 150D127X9010R2 150D157X9010S2 150D187X9010S2 150D227X9010S2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0 3.0 6.0 6.0 10.0 10.0 10.0 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 15 WVDC @ + 85°C, SURGE = 20 V . . . 10 WVDC @ + 125°C, SURGE = 12 V 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 A A A A A A A A A A A A A A 150D224X0015A2 — 150D334X0015A2 — 150D474X0015A2 — 150D684X0015A2 — 150D105X0015A2 — 150D155X0015A2 — 150D225X0015A2 — 150D224X9015A2 150D274X9015A2 150D334X9015A2 150D394X9015A2 150D474X9015A2 150D564X9015A2 150D684X9015A2 150D824X9015A2 150D105X9015A2 150D125X9015A2 150D155X9015A2 150D185X9015A2 150D225X9015A2 150D275X9015A2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2 2 2 2 2 2 2 2 2 4 4 4 4 4 *Insert capacitance tolerance code "X5"; for ± 5% units (special order). www.vishay.com 12 For technical questions, contact [email protected] Document Number: 40015 Revision 11-Jun-03 150D TANTALEX® Solid-Electrolyte Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 A B B B B B B B B B B R R R R R R S S S S PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) 15 WVDC @ + 85°C, SURGE = 20 V . . . 10 WVDC @ + 125°C, SURGE = 12 V 150D335X0015A2 150D335X9015A2 0.5 — 150D395X9015B2 0.5 150D475X0015B2 150D475X9015B2 1.0 — 150D565X9015B2 1.0 150D685X0015B2 150D685X9015B2 1.0 — 150D825X9015B2 1.0 150D106X0015B2 150D106X9015B2 1.0 — 150D126X9015B2 1.0 150D156X0015B2 150D156X9015B2 2.0 — 150D186X9015B2 2.0 150D226X0015B2 150D226X9015B2 3.0 — 150D276X9015R2 3.0 150D336X0015R2 150D336X9015R2 3.0 — 150D396X9015R2 3.0 150D476X0015R2 150D476X9015R2 6.0 — 150D566X9015R2 6.0 150D686X0015R2 150D686X9015R2 6.0 — 150D826X9015S2 6.0 150D107X0015S2 150D107X9015S2 6.0 150D127X0015S2 150D127X9015S2 6.0 150D157X0015S2 150D157X9015S2 10.0 MAX. DF @ + 25°C 120 Hz (%) 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 20 WVDC @ + 85°C, SURGE = 26 V . . . 13 WVDC @ + 125°C, SURGE = 16 V 0.027 0.033 0.039 0.047 A A A A — 150D333X0020A2 — 150D473X0020A2 150D273X9020A2 150D333X9020A2 150D393X9020A2 150D473X9020A2 0.1 0.1 0.1 0.1 2 2 2 2 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 A A A A A A A A A A A A A A A A A A A A B B B B B B B B B — 150D683X0020A2 — 150D104X0020A2 — 150D154X0020A2 — 150D224X0020A2 — 150D334X0020A2 — 150D474X0020A2 — 150D684X0020A2 — 150D105X0020A2 — 150D155X0020A2 — 150D225X0020A2 — 150D335X0020B2 — 150D475X0020B2 — 150D685X0020B2 — 150D106X0020B2 — 150D563X9020A2 150D683X9020A2 150D823X9020A2 150D104X9020A2 150D124X9020A2 150D154X9020A2 150D184X9020A2 150D224X9020A2 150D274X9020A2 150D334X9020A2 150D394X9020A2 150D474X9020A2 150D564X9020A2 150D684X9020A2 150D824X9020A2 150D105X9020A2 150D125X9020A2 150D155X9020A2 150D185X9020A2 150D225X9020A2 150D275X9020B2 150D335X9020B2 150D395X9020B2 150D475X9020B2 150D565X9020B2 150D685X9020B2 150D825X9020B2 150D106X9020B2 150D126X9020B2 0.1 0.1 0.1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 6 6 6 6 *Insert capacitance tolerance code "X5"; for ± 5% units (special order). Document Number: 40015 Revision 11-Jun-03 For technical questions, contact [email protected] www.vishay.com 13 150D Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 20 WVDC @ + 85°C, SURGE = 26 V . . . 13 WVDC @ + 125°C, SURGE = 16 V 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 B R R R R R R S S S S 150D156X0020B2 — 150D226X0020R2 — 150D336X0020R2 — 150D476X0020R2 — 150D686X0020S2 — 150D107X0020S2 150D156X9020B2 150D186X9020R2 150D226X9020R2 150D276X9020R2 150D336X9020R2 150D396X9020R2 150D476X9020R2 150D566X9020S2 150D686X9020S2 150D826X9020S2 150D107X9020S2 2.0 3.0 3.0 3.0 3.0 3.0 6.0 6.0 6.0 6.0 10.0 6 6 6 6 6 6 6 6 6 6 6 35 WVDC @ + 85°C, SURGE = 46 V . . . 23 WVDC @ + 125°C, SURGE = 28 V 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 A A A A A A A A A A A A A A A A A A A A B B B B B B B B B B R R R R R R S S S S — 150D333X0035A2 — 150D473X0035A2 — 150D683X0035A2 — 150D104X0035A2 — 150D154X0035A2 — 150D224X0035A2 — 150D334X0035A2 — 150D474X0035A2 — 150D684X0035A2 — 150D105X0035A2 — 150D155X0035B2 — 150D225X0035B2 — 150D335X0035B2 — 150D475X0035B2 — 150D685X0035B2 — 150D106X0035R2 — 150D156X0035R2 — 150D226X0035R2 — 150D336X0035S2 — 150D476X0035S2 150D273X9035A2 150D333X9035A2 150D393X9035A2 150D473X9035A2 150D563X9035A2 150D683X9035A2 150D823X9035A2 150D104X9035A2 150D124X9035A2 150D154X9035A2 150D184X9035A2 150D224X9035A2 150D274X9035A2 150D334X9035A2 150D394X9035A2 150D474X9035A2 150D564X9035A2 150D684X9035A2 150D824X9035A2 150D105X9035A2 150D125X9035B2 150D155X9035B2 150D185X9035B2 150D225X9035B2 150D275X9035B2 150D335X9035B2 150D395X9035B2 150D475X9035B2 150D565X9035B2 150D685X9035B2 150D825X9035R2 150D106X9035R2 150D126X9035R2 150D156X9035R2 150D186X9035R2 150D226X9035R2 150D276X9035S2 150D336X9035S2 150D396X9035S2 150D476X9035S2 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 3.0 3.0 3.0 3.0 6.0 6.0 6.0 6.0 10.0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 *Insert capacitance tolerance code "X5"; for ± 5% units (special order). www.vishay.com 14 For technical questions, contact [email protected] Document Number: 40015 Revision 11-Jun-03 150D ® Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 50 WVDC @ + 85°C, SURGE = 65 V . . . 33 WVDC @ + 125°C, SURGE = 40 V 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 A — 150D273X9050A2 0.1 A 150D333X0050A2 150D333X9050A2 0.1 A — 150D393X9050A2 0.1 A 150D473X0050A2 150D473X9050A2 0.1 A — 150D563X9050A2 0.1 A 150D683X0050A2 150D683X9050A2 0.1 A — 150D823X9050A2 0.1 A 150D104X0050A2 150D104X9050A2 0.5 A — 150D124X9050A2 0.5 A 150D154X0050A2 150D154X9050A2 0.5 A — 150D184X9050A2 0.5 A 150D224X0050A2 150D224X9050A2 0.5 A — 0.5 150D274X9050A2 150D334X0050A2 A 150D334X9050A2 0.5 — A 0.5 150D394X9050A2 A 150D474X0050A2 0.5 150D474X9050A2 — A 150D564X9050A2 0.5 150D684X0050A2 A 150D684X9050A2 0.5 A — 0.5 150D824X9050A2 A 150D105X0050A2 150D105X9050A2 0.5 — B 0.5 150D125X9050B2 150D155X0050B2 B 0.5 150D155X9050B2 — B 0.5 150D185X9050B2 150D225X0050B2 B 1.0 150D225X9050B2 — B 1.0 150D275X9050B2 150D335X0050B2 B 2.0 150D335X9050B2 — B 2.0 150D395X9050B2 150D475X0050B2 B 3.0 150D475X9050B2 — R 3.0 150D565X9050R2 150D685X0050R2 R 3.0 150D685X9050R2 — R 3.0 150D825X9050R2 150D106X0050R2 R 3.0 150D106X9050R2 — R 3.0 150D126X9050R2 150D156X0050R2 R 6.0 150D156X9050R2 — R 6.0 150D186X9050R2 150D226X0050S2 S 6.0 150D226X9050S2 75 WVDC @ + 85°C, SURGE = 98 V . . . 50 WVDC @ + 125°C, SURGE = 64 V A 0.027 — A 0.033 150D333X0075A2 A 0.039 — A 0.047 150D473X0075A2 A 0.056 — A 0.068 150D683X0075A2 A 0.082 — A 0.10 150D104X0075A2 A 0.12 — A 0.15 150D154X0075A2 A 0.18 — A 0.22 150D224X0075A2 A 0.27 — A 0.33 150D334X0075A2 A 0.39 — A 0.47 150D474X0075A2 A 0.56 — A 0.68 150D684X0075A2 B 0.82 — *Insert capacitance tolerance code "X5"; for ± 5% units (special order). Document Number: 40015 Revision 11-Jun-03 150D273X9075A2 150D333X9075A2 150D393X9075A2 150D473X9075A2 150D563X9075A2 150D683X9075A2 150D823X9075A2 150D104X9075A2 150D124X9075A2 150D154X9075A2 150D184X9075A2 150D224X9075A2 150D274X9075A2 150D334X9075A2 150D394X9075A2 150D474X9075A2 150D564X9075A2 150D684X9075A2 150D824X9075B2 For technical questions, contact [email protected] 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 www.vishay.com 15 150D Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ± 20% PART NUMBER* CAP. TOL. ± 10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 75 WVDC @ + 85°C, SURGE = 98 V . . . 50 WVDC @ + 125°C, SURGE = 64 V 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 B B B B B B B B R R R R R S S 150D105X0075B2 — 150D155X0075B2 — 150D225X0075B2 — 150D335X0075B2 — 150D475X0075R2 — 150D685X0075R2 — 150D106X0075R2 — 150D156X0075S2 150D105X9075B2 150D125X9075B2 150D155X9075B2 150D185X9075B2 150D225X9075B2 150D275X9075B2 150D335X9075B2 150D395X9075B2 150D475X9075R2 150D565X9075R2 150D685X9075R2 150D825X9075R2 150D106X9075R2 150D126X9075S2 150D156X9075S2 0.5 0.5 1.0 1.0 1.0 1.0 2.0 2.0 4.0 4.0 6.0 6.0 8.0 10.0 12.0 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 100 WVDC @ + 85°C, SURGE = 130 V . . . 67 WVDC @ + 125°C, SURGE = 86 V 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 A A A A A A A A A A A A A A A A A B B B B B B B B R R R R R S S — 150D333X0100A2 — 150D473X0100A2 — 150D683X0100A2 — 150D104X0100A2 — 150D154X0100A2 — 150D224X0100A2 — 150D334X0100A2 — 150D474X0100A2 — 150D684X0100B2 — 150D105X0100B2 — 150D155X0100B2 — 150D225X0100B2 — 150D335X0100R2 — 150D475X0100R2 — 150D685X0100R2 150D825X0100S2 150D106X0100S2 150D273X9100A2 150D333X9100A2 150D393X9100A2 150D473X9100A2 150D563X9100A2 150D683X9100A2 150D823X9100A2 150D104X9100A2 150D124X9100A2 150D154X9100A2 150D184X9100A2 150D224X9100A2 150D274X9100A2 150D334X9100A2 150D394X9100A2 150D474X9100A2 150D564X9100A2 150D684X9100B2 150D824X9100B2 150D105X9100B2 150D125X9100B2 150D155X9100B2 150D185X9100B2 150D225X9100B2 150D275X9100B2 150D335X9100R2 150D395X9100R2 150D475X9100R2 150D565X9100R2 150D685X9100R2 150D825X9100S2 150D106X9100S2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 2.5 3.0 4.0 4.0 6.0 6.0 6.0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 *Insert capacitance tolerance code "X5"; for ± 5% units (special order). www.vishay.com 16 For technical questions, contact [email protected] Document Number: 40015 Revision 11-Jun-03 150D ® Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* CAP. TOL. ±20% PART NUMBER* CAP. TOL ±10% MAX. DCL @ + 25°C (µA) MAX. DF @ + 25°C 120 Hz (%) 125 WVDC @ + 85°C, SURGE = 140 V . . . 82 WVDC @ + 125°C, SURGE = 94 V 0.027 A — 150D273X9125A2 1.0 2 0.033 A 150D333X0125A2 150D333X9125A2 1.0 2 0.039 A — 150D393X9125A2 1.0 2 0.047 A 150D473X0125A2 150D473X9125A2 1.0 2 0.056 A — 150D563X9125A2 1.0 2 0.068 A 150D683X0125A2 150D683X9125A2 1.0 2 0.082 A — 150D823X9125A2 1.0 2 0.10 A 150D104X0125A2 150D104X9125A2 1.0 2 0.12 A — 150D124X9125A2 1.0 2 0.15 A 150D154X0125A2 150D154X9125A2 1.0 2 0.18 A — 150D184X9125A2 1.0 2 0.22 A 150D224X0125A2 150D224X9125A2 1.0 2 0.27 A — 150D274X9125A2 1.0 2 0.33 A 150D334X0125A2 150D334X9125A2 1.0 2 0.39 A — 150D394X9125A2 1.5 2 0.47 A 150D474X0125A2 150D474X9125A2 1.5 2 0.56 B — 150D564X9125B2 1.6 2 0.68 B 150D684X0125B2 150D684X9125B2 1.8 2 0.82 B — 150D824X9125B2 2.0 2 1.0 B 150D105X0125B2 150D105X9125B2 2.0 2 1.2 B — 150D125X9125B2 2.0 3 1.5 B 150D155X0125B2 150D155X9125B2 2.0 3 1.8 B — 150D185X9125B2 2.0 3 2.2 B 150D225X0125B2 150D225X9125B2 2.0 3 *Insert capacitance tolerance code "X5"; for ± 5% units (special order). Document Number: 40015 Revision 11-Jun-03 For technical questions, contact [email protected] www.vishay.com 17 150D Solid-Electrolyte TANTALEX® Capacitors Hermetically-Sealed, Axial-Lead Vishay Sprague STANDARD REEL PACKAGING SPECIFICATIONS - MEETS EIA STANDARD RS-296 in inches [millimeters] "A" 13.0 [330.2] STANDARD REEL Tape Spacing B COMPONENT SPACING 1.126 to 3.07 [28.6 to 78.0] I.D. REEL HUB A 1.374 to 3.626 [34.9 to 92.1] 0.031 [0.79] MAX. OFF CENTER (1.a) 0.625 ± 0.062 DIA. [15.88 ± 1.575] THRU HOLE 0.125 [3.18] MAX. 0.250 [6.35] (3.b) 0.750 [19.05] "A" LABEL (4.a) 0.031 [0.79] (3.f) SECTION "A" - "A" BOTH SIDES (3.f) TYPE 150D UNITS WITH INSULATING SLEEVE CASE CODE D L LEAD SIZE COMPONENT SPACING TAPE SPACING AWG NO. NOM. DIA. A B UNITS PER REEL A 0.135 ± 0.016 0.286 ± 0.031 [7.26 ± 0.79] [3.43 ± 0.41] 24 0.020 [0.51] 0.200 ± 0.015 [5.08 ± 0.38] 2.500 ± 0.062 [63.5 ± 1.57] 1000 B 0.185 ± 0.016 0.474 ± 0.031 [4.70 ± 0.41] [12.04 ± 0.79] 24 0.020 [0.51] 0.200 ± 0.015 [5.08 ± 0.38] 2.500 ± 0.062 [63.5 ± 1.57] 1000 R 0.289 ± 0.016 0.686 ± 0.031 [7.34 ± 0.41] [17.42 ± 0.79] 22 0.025 [0.64] 0.400 ± 0.015 [10.16 ± 0.38] 2.875 ± 0.062 [73.03 ± 1.57] 500 S 0.351 ± 0.016 0.786 ± 0.031 [8.92 ± 0.41] [19.96 ± 0.79] 22 0.025 [0.64] 0.400 ± 0.015 [10.16 ± 0.38] 2.875 ± 0.062 [73.03 ± 1.57] 500 STANDARD REEL PACKAGING INFORMATION 1. Component Leads: a. Component leads shall not be bent beyond 0.047" [1.19mm] maximum from their nominal position when measured from the leading edge of the component lead at the inside tape edge and at the lead egress from the component. b. The 'C' dimension shall be governed by the overall length of the reel packaged component. The distance between flanges shall be 0.125" to 0.250" [3.18mm to 6.35mm] greater than the overall component length. 2. Orientation: a. All polarized components must be oriented to one direction. The cathode lead tape shall be a color and the anode lead tape shall be white. 3. Reeling: a. Components on any reel shall not represent more than two date codes when date code identification is required. b. Component leads shall be positioned between pairs of 0.250" [6.35mm] tape. c. The disposable reels have hubs and corrugated fiber board flanges and core or equivalent. d. A minimum of 12.0" [304.8mm] leader of tape shall be provided before the first and after the last component on the reel. e. 50 or 60 lb. Kraft paper must be wound between layer of components as far as necessary for component protection. Width of paper to be 0.062" to 0.250" [1.57mm to 6.35mm] less than the 'C' dimension of the reel. www.vishay.com 18 f. A row of components must be centered between tapes ± 0.047" [1.19mm]. In addition, individual components may deviate from center of component row ± 0.031" [0.79mm]. g. Staples shall not be used for splicing. Not more than 4 layers of tape shall be used in any splice area and no tape shall be offset from another by more than 0.031" [0.79mm] non-cumulative. Tape splices shall overlap at least 6.0" [152.4mm] for butt joints and at least 3.0" [76.2mm] for lap joints and shall not be weaker than unspliced tape. Universal splicing clips may also be used. h. Quantity per reel shall be controlled so that tape components and cover shall not extend beyond the smallest dimension of the flange (either across flats or diameter). Once the quantity per reel for each part number has been established, future orders for that part number shall be packaged in that quantity. When order or release quantity is less than the established quantity, a standard commercial pack is to be used. i. A maximum of 0.25% of the components per reel quantity may be missing without consecutive missing components. j. Adequate protection must be provided to prevent physical damage to both reel and components during shipment and storage. 4. Marking: a. Minimum reel and carton marking shall consist of the following: Customer Part Number, Purchase Order No., Quantity, Package Date, Manufacturer's Name, Electrical Value, Date Code, Vishay Sprague Part Number and Country of Origin. For technical questions, contact [email protected] Document Number: 40015 Revision 11-Jun-03