790D Vishay Sprague Resin-Molded, Radial-Lead Solid Tantalum Capacitors FEATURES • Four case sizes precisely molded with a flame retardant epoxy resin • Stand off on all case sizes • Available on tape for automatic insertion equipment (only A- and B-case, C-and D-case on request). • Low leakage current PERFORMANCE CHARACTERISTICS • Low impedance Operating temperature range: – 55°C to + 125°C • Extended value ranges available ORDERING INFORMATION 790D MODEL X0 CAPACITANCE TOLERANCE 157 CAPACITANCE Expressed in picofarads. First two digits are significant figures. Third digit is the number of zeros to follow. X0 = ± 20% X9 = ± 10% 790D = Standard and Extended Range 006 DC VOLTAGE RATING AT + 85°C R CASE CODE 2 STYLE NUMBER Expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 Volts) See Ratings and Case Codes Table. Insulated Case (Standard) P PACKAGING See Taping Specification B : Bulk G : Ammopack H = 16.5mm H : Ammopack H = 18.5mm I : Ammopack Shouldered Leads (A case) X : Reel Pack H = 16.5mm Y : Reel Pack H = 18.5mm Z : Reel Pack Shouldered Leads (A case) DIMENSIONS in millimeters B H 0.3 Min. ø A 12 Min. e CASE CODE A B C D H MAX. (mm) 7.3 10.5 10.5 10.5 A MAX. (mm) 4.7 7.3 12.3 12.3 B MAX. (mm) 4.2 4.8 7.3 12.3 E ± 0.15 (mm) 2.54 5.08 10.16 10.16 Ø 0.05 (+ 10%) (mm) 0.5 0.5 0.6 0.6 PACKAGING QUANTITIES CASE CODE A B C D *Non preferred configuration on request only Document Number 42072 Revision 26-Mar-02 REEL X/Y 1000 1000 300* 200* AMMO G/H 1000 1000 300* 200* For technical questions, contact [email protected] BULK B 500 250 100 50 www.vishay.com 113 790D Resin-Coated, Radial-Leaded Solid Tantalum Capacitors Vishay Sprague RATINGS AND CASE CODES RATED VOLATAGE UR @ + 85°C 6.3V 10V 16V 20V 25V 35V 40V 50V 25V 32V CATEGORY VOLTAGE UC @ +125°C CR µF 4.0V Std. 6.3V Ext. Std. 10V Ext. Std. 13V Ext. Std. 16V Ext. Std. 23V Ext. Std. Ext. 0.10 Std. A Ext. Std. A 0.15 A 0.22 A 0.33 A 0.47 A Ext. 0.68 1.0 1.5 A 3.3 A 4.7 B B B B B B C C C B C C B C A A A 33 B B B 100 B C B B B C B C C 220 B B B 68 www.vishay.com 114 B A A 22 330 B A A 15 150 B A A 10 47 A A 2.2 6.8 A D B C C C C C C C D D For technical questions, contact [email protected] Document Number 42072 Revision 26-Mar-02 790D Resin-Coated, Radial-Leaded Solid Tantalum Capacitors Vishay Sprague STANDARD/EXTENDED RATINGS CAPACITANCE CR (µF) CASE CODE PART NUMBER UR = 6.3 Volt @ + 85°C, SURGE = 8 V 6.8 22.0 47.0 68.0 150.0 220.0 330.0 A A B B C C D 790D685X(*)6R3A2(#) 790D226X(*)6R3A2(#) 790D476X(*)6R3B2(#) 790D686X(*)6R3B2(#) 790D157X(*)6R3C2(#) 790D227X(*)6R3C2(#) 790D337X(*)6R3D2(#) UR = 10 Volt @ + 85°C, SURGE = 13 V 4.7 15.0 33.0 47.0 68.0 100.0 150.0 220.0 A A B B B C C D 790D475X(*)010A2(#) 790D156X(*)010A2(#) 790D336X(*)010B2(#) 790D476X(*)010B2(#) 790D686X(*)010B2(#) 790D107X(*)010C2(#) 790D157X(*)010C2(#) 790D227X(*)010D2(#) UR = 16 Volt @ + 85°C, SURGE = 20 V 2.2 3.3 10.0 15.0 22.0 33.0 47.0 68.0 100.0 100.0 A A A B B B C C C D 790D225X(*)016A2(#) 790D335X(*)016A2(#) 790D106X(*)016A2(#) 790D156X(*)016B2(#) 790D226X(*)016B2(#) 790D336X(*)016B2(#) 790D476X(*)016C2(#) 790D686X(*)016C2(#) 790D107X(*)016C2(#) 790D107X(*)016D2(#) UR = 20 Volt @ + 85°C, SURGE = 26 V 2.2 6.8 15.0 22.0 47.0 68.0 A A B B C C 790D225X(*)020A2(#) 790D685X(*)020A2(#) 790D156X(*)020B2(#) 790D226X(*)020B2(#) 790D476X(*)020C2(#) 790D686X(*)020C2(#) MAX. DCL @ + 25°C (µA) MAX. DF 120Hz, @ + 25°C (%) MAX. IMPEDANCE 100kHz, @ + 25°C (OHMS) UC = 4 V @ + 125°C, SURGE = 5 V 1.0 1.3 2.9 4.2 9.4 13.8 20.7 6 6 6 6 6 6 8 4.0 2.1 1.3 1.3 0.6 0.6 0.4 UC = 6.3 V @ + 125°C, SURGE = 8 V 1.0 1.5 3.3 4.7 6.8 10.0 15.0 22.0 6 6 6 6 6 6 6 8 4.0 2.5 1.3 1.4 1.3 0.6 0.6 0.4 UC = 10 V @ + 125°C, SURGE = 13 V 1.0 1.0 1.6 2.4 3.5 5.2 7.5 10.8 16.0 16.0 6 6 6 6 6 6 6 6 6 6 5.5 4.4 2.7 1.6 1.3 1.6 0.8 0.6 0.7 0.5 UC = 13 V @ + 125°C, SURGE = 16 V 1.0 1.3 3.0 4.4 9.4 13.6 6 6 6 6 6 6 5.5 3.5 1.5 2.1 0.7 0.8 Extended Ratings in bold print. (*)Insert 0 for ± 20% tolerance or 9 for ± 10% (#)See order information, packaging code Document Number 42072 Revision 26-Mar-02 For technical questions, contact [email protected] www.vishay.com 115 790D Resin-Coated, Radial-Leaded Solid Tantalum Capacitors Vishay Sprague STANDARD/EXTENDED RATINGS CAPACITANCE CR (µF) CASE CODE PART NUMBER UR = 25 Volt @ + 85°C, SURGE = 32 V 1.5 4.7 10.0 15.0 22.0 33.0 A A B B B C 790D155X(*)025A2(#) 790D475X(*)025A2(#) 790D106X(*)025B2(#) 790D156X(*)025B2(#) 790D226X(*)025B2(#) 790D336X(*)025C2(#) UR = 35 Volt @ + 85°C, SURGE = 45 V 3.3 10.0 33.0 A B C 790D335X(*)035A2(#) 790D106X(*)035B2(#) 790D336X(*)035C2(#) UR = 40 Volt @ + 85°C, SURGE = 52 V 0.10 0.33 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 A A A A B B B B B C C C 790D104X(*)040A2(#) 790D334X(*)040A2(#) 790D474X(*)040A2(#) 790D105X(*)040A2(#) 790D155X(*)040B2(#) 790D225X(*)040B2(#) 790D335X(*)040B2(#) 790D475X(*)040B2(#) 790D685X(*)040B2(#) 790D106X(*)040C2(#) 790D156X(*)040C2(#) 790D226X(*)040C2(#) UR = 50 Volt @ + 85°C, SURGE = 65 V 0.10 0.15 0.22 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 A A A A B B B B C C C 790D104X(*)050A2(#) 790D154X(*)050A2(#) 790D224X(*)050A2(#) 790D105X(*)050A2(#) 790D155X(*)050B2(#) 790D225X(*)050B2(#) 790D335X(*)050B2(#) 790D475X(*)050B2(#) 790D685X(*)050C2(#) 790D106X(*)050C2(#) 790D156X(*)050C2(#) MAX. DCL @ + 25°C (µA) MAX. DF 120Hz, @ + 25°C (%) MAX. IMPEDANCE 100kHz, @ + 25°C (OHMS) UC = 16 V @ + 125°C, SURGE = 20 V 1.0 1.1 2.5 3.7 5.5 8.2 6 6 6 6 6 6 6.0 4.5 1.6 2.4 2.1 0.8 UC = 23 V @ + 125°C, SURGE = 29 V 1.2 3.5 11.6 6 6 6 6.0 2.6 1.3 UC = 25 V @ + 125°C, SURGE = 32 V 1.0 1.0 1.0 1.0 1.0 1.0 1.3 1.8 2.7 4.0 6.0 8.8 6 6 6 6 6 6 6 6 6 6 6 6 30 14 11 6.5 5.2 4.0 2.8 2.0 1.6 1.3 1.0 0.8 UC = 32 V @ + 125°C, SURGE = 41 V 1.0 1.0 1.0 1.0 1.0 1.1 1.6 2.3 3.4 5.0 7.5 6 6 6 6 6 6 6 6 6 6 6 30 24 18 6.5 5.2 4.0 2.8 2.0 1.6 1.3 1.0 Extended Ratings in bold print. (*) Insert 0 for ± 20% tolerance or 9 for ± 10% (#) See order information, packaging code www.vishay.com 116 For technical questions, contact [email protected] Document Number 42072 Revision 26-Mar-02 790D Resin-Coated, Radial-Leaded Solid Tantalum Capacitors Vishay Sprague MAXIMUM PERMISSIBLE RIPPLE VOLTAGE AT + 25°C 10 10 7 7 5 5 3 2 Urms 30 20 Urms 30 20 35 50V /4 2 0 16 5V V V 10 6. V 3V 1 0.7 3 2 1 0.7 0.5 0.3 0.5 0.3 0.2 0.2 0.1 0.1K 0.5 1K 10K 5 FREQUENCY IN HERTZ 35 50V /4 25 0V 16 V 10 V 6. V 3V 50 100K 0.1 0.1K 500 0.5 1K 10K 5 FREQUENCY IN HERTZ Case size A 10 7 7 5 5 Urms 10 Urms 30 20 5 35 0V /4 25 0V 16 V 10 V V 6. 3V 1 0.7 0.5 0.3 100K 500 50 100K 500 Case size B 30 20 3 2 50 3 2 5 35 0V /4 25 0V V 1 16 V 10 6. V 3V 0.7 0.5 0.3 0.2 0.2 0.1 0.1K 0.5 1K 10K 5 FREQUENCY IN HERTZ 50 100K 0.1 0.1K 500 0.5 1K 10K 5 FREQUENCY IN HERTZ Case size D Case size C TYPICAL CURVES OF IMPEDANCE VS FREQUENCY 30 100 6.3V 35V 10 10 OHMS OHMS 6.8µF 1 47µF 1µF 1 150µF 6.8µF 0.1 1K 330µF 47µF 10K 100K 1M FREQUENCY IN HERTZ Document Number 42072 Revision 26-Mar-02 10M 100M 0.1 1K 10K 22µF 100K 1M 10M 100M FREQUENCY IN HERTZ For technical questions, contact [email protected] www.vishay.com 117 790D Resin-Coated, Radial-Leaded Solid Tantalum Capacitors Vishay Sprague PERFORMANCE CHARACTERISTICS 1. Operating Temperature: - 55°C to + 85°C with rated voltage UR applied. + 85°C to + 125°C with linear voltage derating to category voltage UC (see general information) applied. 2. Capacitance and Tolerance: Capacitance measured at 100Hz and + 25°C shall be within the specified tolerance limits of the nominal rating. 3. Reverse Voltage: 15% of rated voltage at + 25°C 5% of rated voltage at + 85°C 4. Surge Voltage: 9. Charge and Discharge Test: 1 million cycles at + 85°C, 0.5 s charge at UR. 0.5 s discharge Series resistance < 0.5 ohm ∆C/C ≤ 5% of initial value IL ≤ initial limit DF ≤ initial limit 10. Marking: Top: Rating and polarity Front: Type, date code, SPRAGUE trademark 130% of UR at + 85°C 130% of UC at + 125°C. 5. Impedance at 100 kHz: Measured at + 20°C ± 5°C, impedance shall not exceed the values listed in data sheet. 6. Stability at low and high temperatures: Capacitance change with temperature, dissipation factor and DC leakage current shall not exceed the limits of the following table. TEMP- CAPACITANCE DISSIPATION ERATURE CHANGE FACTOR CRUR ≤ 1900 IL CRUR > 1900 LEAKAGE CURRENT - 55°C - 10% 9% 11% - + 25°C - 6% 8% 0.01 CR x UR or 1µA whichever is greater + 85°C + 12% 9% 11% 0.1 CR x UR or 10µA whichever is greater + 125°C + 15% 12% 14% 0.125 CR x UR or 12.5µA whichever is greater 7. Life Test: 2000 hours at + 85°C with rated voltage applied 2000 hours at + 125°C. with category voltage applied. ∆C/C ≤ 10% of initial value IL ≤ 1.25 initial limit DF ≤ initial limit 8. Humidity Test: 56 days at + 40°C, 90% relative humidity ∆C/C ≤ 8% of initial value IL ≤ initial limit DF ≤ initial limit www.vishay.com 118 For technical questions, contact [email protected] Document Number 42072 Revision 26-Mar-02 790D Resin-Coated, Radial-Leaded Solid Tantalum Capacitors Vishay Sprague TAPE AND REEL PACKING REEL PACKING A and B Cases only (Meets IEC 286-2) ∆h Ø 20 p SPRAGUE 30 max W2 329 - 331 HO H W0 W1 AMMOPACKING W PO P1 P2 F DØ t 191 201 direction of unreel 41 - 45 320 - 330 CASE CODE TAPE WIDTH DIMENSIONS (mm) /UNITS PER REEL Pitch of component P [mm] 12.7 ± 1.0 Feed hole pitch P0 [mm] 12.7 ± 0.3 Tape width W [mm] 18 (+1 / - 0.5) Hold down tape width W0 [mm] 5.0 Hole position W1 [mm] 9 (+0.75 / -0.5) Hold down tape position W2 [mm] 0 (+3 /-0) Feed hole diameter D0 [mm] 4.0 ± 0.3 Tape thickness T [mm] 0.5 ± 0.2 Component alignment ∆h [mm] 0±2 Lead clinch height H0 [mm] 16.0 ± 0.5 Hole center to component center P2 [mm] 6.35 ± 1.3 Lead wire spacing Feed hole center to wire center Reel pack options Ammopack options Quantity per reel / box Document Number 42072 Revision 26-Mar-02 Case A Case B Case B F[mm] 2.5 + 0.6, - 0.1 5 + 0.6, - 0.1 5 + 0.6, - 0.1 P1 [mm] 5.1 ± 0.7 3.85 ± 0.7 3.85 ± 0.7 H = 16.5 mm H = 18.5 mm X Y Z X Y H = 16.5 mm H = 18.5 mm G H I G H 1000 1000 1000 For technical questions, contact [email protected] www.vishay.com 119