S i e m e n s AG , A& D C D , B e t r i e b Am b e r g OFFICE Siemens AG A&D CD CC TS2 REPORT: 165071-1455854 PROJECT: 1455854 Edition 1: August 08, 2003 Project 1455854, Siemens Job 03dr020 Issued by K. Drutschmann Reviewed by M. Legault, Eng. Contents: Pages 1 up to 9 Test Report No. 03046W-u: Pages 1 to 36 Illustrations: Ill. Nos. 1 to 3 Photographs Figures: Fig. Nos. 1 and 2 REPORT: 165071-1455854 Date issued: August 08, 2003 PROJECT: 1455854 Page: 2 CSA PRODUCT CLASS 3211 07 - INDUSTRIAL CONTROL EQUIPMENT - Miscellaneous Apparatus SUBJECT Solid state relay s and solid state contactors, open ty pe, Series 3RF21 and 3RF23 with the following ratings: Contactor Ty pe 3RF23 Voltage: General Use: AC Resistance: AC Pilot Duty : Control Voltage: 24-230 V, 230-460 V, 400-600 V 9.6 A, 17.6 A, 27 A, 36 A, 45 A, 62 A or 80 A 9.6 A, 17.6 A, 27 A, 36 A, 45 A, 62 A or 80 A 6 A, 12 A, 15 A, 20 A, 25 A, 27.5 A or 30 A 24 V dc, 24 V ac/dc, 110 - 230 V ac or 4 - 24 V dc (TTL) Surrounding Ambient: 50 °C Relay Ty pe 3RF21 Voltage: General Use: 24-230 V, 230-460 V, 400-600 V 20 A, 30 A, 50 A, 70 A or 80 A Special rating for surrounding ambient 40 °C: 90 A AC Resistance: 20 A, 30 A, 50 A, 70 A or 80 A Special rating for surrounding ambient 40 °C: 90 A Control Voltage: 24 V dc, 24 V ac/dc, 110 - 230 V ac or 4 - 24 V dc (TTL) Surrounding Ambient: 50 °C Heat Sink rating: 1.7 K / 1 W Notes 1. 2. 3. 4. The ty pe designation may be completed with suffixes. Certified as component for use only in Certified equipment where the acceptability of combination is to be determined by CSA International. Heat sink with 1 o K/W is required for solid-state relay Ty pe 3RF21. Solid-state relay Model 3RF2120, 600V doesn’t exist. REPORT: 165071-1455854 Date issued: August 08, 2003 PROJECT: 1455854 Page: 3 DECLARATION The product, as described in this report, complies with: CSA Standard C22.2 No. 0-M91 - General Requirements CSA Standard C22.2 No. 14-95 - Industrial Control Equipment MARKINGS Submittor’s name or tradename “Siemens“ and/or CSA File LR 12730 and/or CSA Master Contract 165071, ty pe designation, electrical ratings and CSA Monogram appear on an adhesive label and/or printed on the cover in a permanent manner. Information on heat sink ty pe required (1 o K/W) is marked in the instruction manual or on the packaging of solid-state relay Ty pe 3RF21. The following statements re marked on the device: "RESISTIVE LOADS ONLY" "SURROUNDING AMBIENT 50 °C” "USE 60/75°C COPPER WIRE ONLY" ALTERATIONS The markings are in accordance with the “MARKINGS“ paragraph above. FACTORY TESTS The equipment, at the conclusion of manufacture and before shipment, shall withstand for one minute, without breakdown, the application of twice rated voltage plus 1000 V between live parts and metal parts, which may be grounded, on a basis of at least 3% of the daily production intended to bear the CSA Monogram. As an alternative, a potential 20 per cent higher may be applied for one second. The factory test may be made at existing room temperatures. As an alternative, method based on IEC 410 and in accordance with submittor’s ISO 9001 Quality program. Warning: These tests may present a hazard of injury to personnel and/or property and should only be performed by persons knowledgeable of such hazards and under conditions designed to minimize the possibility of injury . REPORT: 165071-1455854 Date issued: August 08, 2003 DESCRIPTION Nomenclature Breakdown 3RF21 I 10 II - 1 III A IV A V 0 VI I. Basic Ty pe 3RF21 - Solid State Relay 3RF23 - Solid State Contactor II. Ratings 10 20 30 40 50 70 90 - contactor contactor contactor contactor contactor contactor contactor 9.6 A 17.6 A 27 A 36 A 45 A 62 A 80 A Relay Relay Relay Relay Relay III. Ty pe of Terminals -1 Screw Terminal -2 Cage Clamp Terminal -3 Ring Lug Terminal IV. Switching Function A Zero point switching B Instantaneous switching V. Number of Controlled Phases A one phase controlled VI. Control Voltage 0 24 V dc 1 24 V ac/dc 2 110 up to 230 V ac 4 4 up to 24 V dc (TTL) VII. Rated Voltage 2 24 up to 230 V 4 230 up to 460 V 6 400 up to 600 V 2 VII 20 A 30 A 50 A 70 A 80 A PROJECT: 1455854 Page: 4