RMB2S & RMB4S Vishay General Semiconductor Miniature Glass Passivated Fast Recovery Surface Mount Bridge Rectifier FEATURES • UL recognition, file number E54214 ~ • Saves space on printed circuit boards ~ • Ideal for automated placement • Fast recovery, low switching loss • High surge current capability ~ • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C • Solder dip 260 °C, 40 s ~ • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TO-269AA (MBS) TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for power supply, lighting ballaster, battery charger, home appliances, office equipment, and telecommunication applications. PRIMARY CHARACTERISTICS IF(AV) 0.5 A VRRM 200 V, 400 V IFSM 30 A trr 150 ns VF 1.25 V TJ max. 150 °C MECHANICAL DATA Case: TO-269AA (MBS) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for commercial grade, meets JESD 201 class 1A whisker test Polarity: As marked on body MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL RMB2S 2R 4R Maximum repetitive peak reverse voltage VRRM 200 400 V Maximum RMS voltage VRMS 140 280 V VDC 200 400 V Device marking code Maximum DC blocking voltage Maximum average forward output rectified current at TA = 30 °C on glass-epoxy P.C.B. on aluminum substrate Peak forward surge current 8.3 msec single half sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range RMB4S UNIT 0.5 (1) IF(AV) 0.8 (2) A IFSM 30 A I2t 5.0 A 2s TJ, TSTG - 55 to + 150 °C Notes: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3 mm) pads (2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20 mm) mounted on 0.05 x 0.05" (1.3 x 1.3 mm) solder pad Document Number: 88705 Revision: 01-Feb-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 RMB2S & RMB4S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage drop per diode 0.4 A SYMBOL RMB2S RMB4S UNIT VF 1.25 V Maximum DC reverse current at rated DC blocking voltage per diode TA = 25 °C TA = 125 °C IR 5.0 100 µA Maximum reverse recovery time per diode IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 150 ns Typical junction capacitance per diode 4.0 V, 1 MHz CJ 13 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL RMB2S RMB4S 85 70 (2) 20 (1) RθJA RθJA RθJL Typical thermal resistance UNIT (1) °C/W Notes: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3 mm) pads (2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20 mm) mounted on 0.05 x 0.05" (1.3 x 1.3 mm) solder pad ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE RMB4S-E3/45 0.22 45 100 Tube RMB4S-E3/80 0.22 80 3000 13" diameter paper tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 35 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 0.8 0.7 Aluminum Substrate 0.6 0.5 0.4 Glass Epoxy P.C.B. 0.3 0.2 0.1 Resistive or Inductive Load TA = 40 °C Single Half Sine-Wave 30 25 20 f = 60 Hz f = 50 Hz 15 10 5 1.0 Cycle 0 0 0 20 40 60 80 100 120 140 160 1 10 100 Ambient Temperature (°C) Number of Cycles Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88705 Revision: 01-Feb-08 RMB2S & RMB4S Vishay General Semiconductor 30 Pulse Width = 300 µs 1 % Duty Cycle Junction Capacitance (pF) Instantaneous Forward Current (A) 10 TJ = 150 °C 1 TJ = 25 °C 0.1 0.01 0.3 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 25 20 15 10 5 0 0.5 0.7 0.9 1.1 1.3 0.1 1.5 1 10 100 1000 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode Instantaneous Reverse Leakage Current (µA) 100 TJ = 125 °C 10 1 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) 0.029 (0.74) 0.017 (0.43) TO-269AA (MBS) Mounting Pad Layout 0.023 MIN. (0.58 MIN.) 0.161 (4.10) 0.144 (3.65) 0.272 (6.90) 0.252 (6.40) 0.272 MAX. (6.91 MAX.) 0.030 MIN. (0.76 MIN.) 0.105 (2.67) 0.095 (2.41) 0.195 (4.95) 0.179 (4.55) 0 to 8° 0.205 (5.21) 0.195 (4.95) 0.049 (1.24) 0.039 (0.99) 0.062 (1.57) 0.058 (1.47) 0.106 (2.70) 0.090 (2.30) 0.114 (2.90) 0.094 (2.40) Document Number: 88705 Revision: 01-Feb-08 0.0075 (0.19) 0.0065 (0.16) 0.038 (0.96) 0.019 (0.48) 0.008 (0.20) 0.004 (0.10) 0.114 (2.90) 0.110 (2.80) 0.058 (1.47) 0.054 (1.37) 0.105 (2.67) 0.095 (2.41) 0.016 (0.41) 0.006 (0.15) 0.018 (0.46) 0.014 (0.36) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1