Product Brief BTS 50060-1TEA Smart Switches, Smart Choice Key Features 6mΩ RON (max. 12mΩ @ 150°C) with 60A (min.) inrush current Optimized edge shaping during switching 3.3V and With the introduction of BTS 50060-1TEA, Infineon broadens its already extensive portfolio of low ohmic smart switches. The BTS 50060-1TEA is a single channel 6mΩ (max. 12mΩ @ 150°C) High Side Driver, housed in TO-252-5 (DPAK 5 pin) RoHS compliant package. 5V compatible logic inputs Advanced analog load current sense signal Infineon® Intelligent Latch Overload and overtemperature protection, with defined diagnostic An optimized edge shaping results in low switching losses and good EMC performance, for the best combination between Power and Efficiency. signal Key Benefits The device includes protection functions like short circuit and overtemperature shutdown. Through the IS pin, the BTS 50060-1TEA provides an accurate load current measurement in normal operation and a diagnostic feedback, with a defined signal, for such events as open load – both in ON and OFF state, short to battery, overcurrent and overtemperature. Low switching losses EMC optimized performance Direct connection to the MCU Easy current sense calibration An innovative sense current concept enables a simplified end of line calibration, for improved load current sensing accuracy. Applications Most suitable for loads with high inrush current, e.g. PTC heaters Relay and fuse replacement All types of resistive, inductive and capacitive loads www.infineon.com/profet Latched switch-off and reporting in case of fault condition Product Brief BTS 50060-1TEA Smart Switches, Smart Choice Block Diagram Control Chip Power Stage (base chip) ESD + Overvoltage + Reverse Polarity Protection VS undervoltage Shutdown & restart Temp input Circuit in diagnosis & Protection rin Power Stage (gate drive) i iS Sense output ouT Gnd Application Example VBAT +5V VS RInput µC e.g. XC866 IN 10kΩ RSense 10kΩ OUT IS RIS 1kΩ GND RL Load Example: Heater GND How to reach us: http://www.infineon.com Published by Infineon Technologies AG 81726 Munich, Germany © 2010 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Published by Infineon Technologies AG Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Order Number: B127-H9455-X-X-7600 NB10-1388