MLX75305 Light-to-Voltage Converter Features and Benefits Converts Light Intensity to a Voltage High linearity Supply voltage range 3.0V to 5.5V Standard SO8 package with open cavity Standard DFN3x3 package with open cavity Open drain output Lead free component, suitable for lead free soldering profile 260˚C (target), MSL3 Ideal for automotive applications Ordering Information Part No. MLX75305 MLX75305 390107530501 Rev. 002 Temperature Code Package Code K XD -40°C to 125°C SO8 Open Cavity K XE -40°C to 125°C DFN3x3 Open Cavity Page 1 of 10 Option Code Delivery Form Tape On Reel Tape On Reel Data Sheet April/07 MLX75305 Light-to-Voltage Converter 1 Functional Diagram 2 General Description The MLX75305 is a CMOS integrated light-to-voltage converter with an integrated photodiode. The sensor is intended for automotive applications wherein infrared LEDs are used. The MLX75305 block diagram is shown in Section 1 and contains following blocks: a trans impedance amplifier to convert and amplify the photocurrent of the photodiode and an open drain output buffer stage. 390107530501 Rev. 002 Page 2 of 10 Data Sheet April/07 MLX75305 Light-to-Voltage Converter Table of Contents 1 Functional Diagram....................................................................................................2 2 General Description ...................................................................................................2 3 Pin Definitions and Descriptions ..............................................................................4 4 Absolute Maximum Ratings ......................................................................................4 5 MLX75305 Specifications ..........................................................................................5 6 Timing diagrams ........................................................................................................6 7 Applications Information ...........................................................................................6 8 SO8 Open Cavity Package Information....................................................................7 9 DFN3x3 Open Cavity Package Information..............................................................8 10 Standard information regarding manufacturability of Melexis products with different soldering processes ...................................................................................9 11 ESD Precautions ........................................................................................................9 12 Disclaimer .................................................................................................................10 390107530501 Rev. 002 Page 3 of 10 Data Sheet April/07 MLX75305 Light-to-Voltage Converter 3 Pin Definitions and Descriptions Pin Number 1 Pin Name Description Type Vss Ground connection Ground 2 OUT Analog output Open drain output 3 Vdd Power supply Supply 4 N.C. Not connected Floating 5 N.C. Not connected Floating 6 N.C. Not connected Floating 7 N.C. Not connected Floating 8 N.C. Not connected Floating 4 Absolute Maximum Ratings Valid for all MLX75305 versions. All voltages are referenced to Vss. Symbol Rating Vdd Supply Voltage, VDD (over voltage) Vout DC Output Voltage Iout DC Output Current, per Pin TStg Storage Temperature Range, TS VESD-HBM ESD Sensitivity (Human Body Model according to CDF-AEC-Q100) VESD-MM ESD Sensitivity (Machine Model according to CDF-AEC-Q100) Value Unit -0.3 to 7 V -0.3 to Vdd+0.3V V ±20 mA -40 to 125 °C 4 kV 200 V For proper operation Vout should be constrained to the range Vss≤Vout≤Vdd. Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximumrated conditions for extended periods may affect device reliability. 390107530501 Rev. 002 Page 4 of 10 Data Sheet April/07 MLX75305 Light-to-Voltage Converter 5 MLX75305 Specifications All voltages are referenced to Vss. Symbol Vdd Parameter Conditions Static Power Supply Current Vdark Dark level Re Responsivity NLAO Non Linearity TC λ0.3 Spd Vout VOH tVdd_rise Temperature Coefficient Spectral Bandwidth Area of photodiode Output voltage Maximum Output voltage high Vdd rise time tsetup tr tf Electrical setup-time Rise time Fall time TA Operating Temperature Range Typ 3 Supply Voltage Idd Min At Vdd=5.5V, unloaded output (a), (b) Ee=0 (a), Vout range = 50mV..4.5V, 25˚C (a), in the 10..90% Output Range (a), Ee=46µW/cm² Tamb=25˚C (a), Ee=46µW/cm² (a), Ee>1mW/cm² 10..90% of Vdd Units Test 5.5 V V 2 mA V mV mV/(µW/ 2 cm ) V % V %/C nm 2 mm V V µs X X D V V V 100 22 22 µs µs µs V X X 125 °C V 10 50 90 60 70 80 +/-2 -0.25 500 1.8 4.9 0 0 0 (a) (a) Max -40 1000 0.36 2 4.95 4 8 8 2.2 V (a) Vdd=5V, RL=10kOhm, CL=50pF, λ= 880nm (b) The dark level is ratio metric with the Vdd power supply voltage 1 The column Test indicates if the specific parameter is tested in production. Following symbols are used: V: the specific parameter is tested in production X: the specific parameter is verified in characterisation, but is not tested in production (e.g. timings and capacitances) D: the specific parameter is guaranteed by design and is not tested as such in production 390107530501 Rev. 002 Page 5 of 10 Data Sheet April/07 1 MLX75305 Light-to-Voltage Converter 6 Timing diagrams Definition of the rise and fall times Definition of the power-on delay 7 Applications Information A typical connection diagram is shown in the figure below. A load resistor RL is needed to get the voltage level out. The load capacitance CL is typically formed by the input capacitance of the component that is connected to the sensor output, the wiring capacitance and the output capacitance of the sensor itself. Decoupling capacitors between Vdd and Vss (1uF in parallel with 100nF) are highly recommended in all configurations. Recommendation: every change in the application should be agreed by both parties. 390107530501 Rev. 002 Page 6 of 10 Data Sheet April/07 MLX75305 Light-to-Voltage Converter 8 SO8 Open Cavity Package Information SO8 open cavity package, MSL3, 260˚C soldering profile (target). 390107530501 Rev. 002 Page 7 of 10 Data Sheet April/07 MLX75305 Light-to-Voltage Converter 9 DFN3x3 Open Cavity Package Information DFN3x3 open cavity package, MSL3, 260˚C soldering profile (target). 390107530501 Rev. 002 Page 8 of 10 Data Sheet April/07 MLX75305 Light-to-Voltage Converter 10 Standard information regarding manufacturability products with different soldering processes of Melexis Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity level according to following test methods: Reflow Soldering SMD’s (Surface Mount Devices) • • IPC/JEDEC J-STD-020 Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices (classification reflow profiles according to table 5-2) EIA/JEDEC JESD22-A113 Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing (reflow profiles according to table 2) Wave Soldering SMD’s (Surface Mount Devices) • EN60749-20 Resistance of plastic- encapsulated SMD’s to combined effect of moisture and soldering heat Solderability SMD’s (Surface Mount Devices) • EIA/JEDEC JESD22-B102 and EN60749-21 Solderability For all soldering technologies deviating from above mentioned standard conditions (regarding peak temperature, temperature gradient, temperature profile etc) additional classification and qualification tests have to be agreed upon with Melexis. The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of adhesive strength between device and board. Melexis is contributing to global environmental conservation by promoting lead free solutions. For more information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of the use of certain Hazardous Substances) please visit the quality page on our website: http://www.melexis.com/quality.asp 11 ESD Precautions Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures whenever handling semiconductor products. 390107530501 Rev. 002 Page 9 of 10 Data Sheet April/07 12 Disclaimer Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Melexis reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with Melexis for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by Melexis for each application. The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis’ rendering of technical or other services. © 2005 Melexis NV. All rights reserved. For additional information contact Melexis Direct: Europe, Africa, Asia: Phone: +32 1367 0495 E-mail: [email protected] America: Phone: +1 603 223 2362 E-mail: [email protected] ISO/TS 16949 and ISO14001 Certified 390107530501 Rev. 002 Page 10 of 10 Data Sheet April/07