74LVC1G58

74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Description
Pin Assignments
The 74LVC1G58 is a single 3-input positive configurable multiple
(Top View)
(Top View)
function gate with a standard push-pull output. The output state is
determined by eight patterns of 3-bit input. The user can chose the
IN1 1
6 IN2
IN1
1
6
IN2
logic functions AND, OR, NAND, NOR, XOR, inverter or non-inverting
GND 2
5 VCC
GND
2
5
VCC
IN0
3
4
Y
buffer. All inputs can be connected to ground or VCC as required.
1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to
SOT363
SOT26
be used in a mixed voltage environment. The device is fully specified
NEW PRODUCT
4 Y
IN0 3
The device is designed for operation with a power supply range of
for partial power down applications using IOFF. The IOFF circuitry
(Top View)
disables the output preventing damaging current backflow when the
(Top View)
IN1 1
6
IN2
IN1
1
6
IN2
GND 2
5
VCC
GND
2
5
IN0
3
4
VCC
Y
device is powered down. The user is reminded that the device can
simulate several types of logic gates, but may respond differently due
to the Schmitt action at the inputs.
IN0 3
4
Y
X2-DFN1410-6
X2-DFN1010-6
Features
Applications
•
Wide Supply Voltage Range from 1.65V to 5.5V
•
Voltage Level Shifting
•
± 24mA Output Drive at 3.3V
•
General Purpose Logic
•
CMOS low power consumption
•
Power Down Signal Isolation
•
IOFF Supports Partial-Power-Down Mode Operation
•
Wide array of products such as:
•
Inputs accept up to 5.5V
ƒ
PCs, networking, notebooks, netbooks, PDAs
•
ESD Protection Exceeds JESD 22
ƒ
Computer peripherals, hard drives, CD/DVD ROM
ƒ
200-V Machine Model (A115-A)
ƒ
TV, DVD, DVR, set top box
ƒ
2000-V Human Body Model (A114-A)
ƒ
Cell Phones, Personal Navigation / GPS
•
Latch-Up Exceeds 100mA per JESD 78, Class II
ƒ
MP3 players ,Cameras, Video Recorders
•
Range of Package Options
•
SOT26, SOT363, DF1410, and DFN1010: Available in “Green”
Molding Compound (no Br, Sb)
•
Lead Free Finish/ RoHS Compliant (Note 1)
ƒ
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
ƒ
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
74LVC1G58
Document number DS35126 Rev. 4 - 2
1 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Pin Descriptions
Pin Name
Function
IN1
Data Input
GND
Ground
IN0
Data Input
NEW PRODUCT
Y
Data Output
VCC
Supply Voltage
IN2
Data Input
Logic Diagram
Function Table
Inputs
Output
IN2
IN1
IN0
Y
L
L
L
L
L
L
H
H
L
H
L
L
L
H
H
H
H
L
L
H
H
L
H
H
H
H
L
L
H
H
H
L
74LVC1G58
Document number DS35126 Rev. 4 - 2
2 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Logic Configurations
Vcc
A
Y
B
A
1
6
2
5
3
4
B
Y
A
Y
B
NEW PRODUCT
Configuration 2
2-Input AND Gate with A Input Inverted
2-Input NOR Gate with B input Inverted
Function Selection Table
Logic Function
2-input NAND
Configuration
1
2-input NAND with both inputs inverted
4
2-input AND with inverted input
2, 3
2-input NOR with inverted input
2, 3
2-input OR
4
2-input OR with both inputs inverted
1
2-input XOR
5
1-input Buffer
6
74LVC1G58
Document number DS35126 Rev. 4 - 2
3 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Absolute Maximum Ratings (Note 4)
Symbol
Description
ESD HBM
Human Body Model ESD Protection
ESD MM
Machine Model ESD Protection
NEW PRODUCT
VCC
Rating
Unit
2
KV
200
V
Supply Voltage Range
-0.5 to 6.5
V
VI
Input Voltage Range
-0.5 to 6.5
V
VO
Voltage applied to output in high impedance or IOFF state
-0.5 to 6.5
V
VO
Voltage applied to output in high or low state
-0.3 to VCC +0.5
V
IIK
Input Clamp Current VI < 0
-50
mA
IOK
Output Clamp Current
-50
mA
IO
Continuous output current
±50
mA
Continuous current through Vdd or GND
±100
mA
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
TJ
TSTG
Notes:
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
Recommended Operating Conditions (Note 5)
Symbol
VCC
Operating Voltage
Parameter
Min
Max
Unit
Operating
1.65
5.5
V
Data retention only
1.5
V
VI
Input Voltage
0
5.5
V
VO
Output Voltage
0
VCC
V
VCC = 1.65V
-4
VCC = 2.3V
IOH
High-level output current
-8
-16
VCC = 3V
-24
VCC = 4.5V
-32
VCC = 1.65V
4
VCC = 2.3V
IOL
Δt/ΔV
TA
Notes:
Low-level output current
Input transition rise or fall rate
mA
8
16
VCC = 3V
mA
24
VCC = 4.5V
32
VCC = 1.8V ± 0.15V, 2.5V ± 0.2V
20
VCC = 3.3V ± 0.3V
10
VCC = 5V ± 0.5V
5
Operating free-air temperature
-40
+125
ns/V
ºC
5. Unused inputs should be held at VCC or Ground.
74LVC1G58
Document number DS35126 Rev. 4 - 2
4 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Electrical Characteristics TA = -40°C to +85°C (All typical values are at VCC = 3.3V, TA = +25°C)
Symbol
NEW PRODUCT
VT+
VT-
ΔVT
Parameter
Test Conditions
Positive-going input
threshold voltage
Negative-going input
threshold voltage
Hysteresis
(VT+ - VT-)
IOH = -100μA
VOH
High Level Output Voltage
High-level Input Voltage
IOFF
ICC
2.3V
1.11
1.60
3V
1.50
2.00
4.5V
2.16
2.74
Max
5.5V
2.61
3.33
0.30
0.72
2.3V
0.58
1.00
3V
0.80
1.30
4.5V
1.21
1.95
5.5V
1.45
2.35
1.65V
0.30
0.62
2.3V
0.40
0.80
3V
0.35
1.00
4.5V
0.55
1.10
5.5V
0.60
1.20
1.2
IOH = -8mA
2.3V
1.9
IOH = -16mA
Typ
1.65V
1.65V
3V
2.3
4.5V
IOL = 100μA
1.65V to 5.5V
0.1
IOL = 4mA
1.65V
0.45
IOL = 8mA
2.3V
0.3
IOL = 16mA
3V
VI = 5.5V or GND
VI = 5.5V of GND
IO=0
Unit
V
2.4
IOH = -32mA
3.8
0.4
V
0.55
4.5
0.55
0 to 5.5V
±5
μA
0
± 10
μA
1.65V to 5.5V
10
μA
3V to 5.5V
500
μA
Power Down Leakage Current VI or VO = 5.5V
Supply Current
1.20
1.65V to 5.5V
IOL = 32mA
Input Current
0.70
IOH = -4mA
IOL = 24mA
II
Min
1.65V
VCC – 0.1
IOH = -24mA
VOL
VCC
One input at VCC -0.6V
ΔICC
Additional Supply Current
Other inputs at VCC or
GND
74LVC1G58
Document number DS35126 Rev. 4 - 2
5 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Electrical Characteristics TA = -40°C to +125°C (All typical values are at VCC = 3.3V, TA = +25°C)
Symbol
NEW PRODUCT
VT+
VT-
ΔVT
Parameter
0.70
1.20
1.60
2.00
2.16
2.74
5.5V
2.61
3.33
0.30
0.75
0.58
1.03
3V
0.80
1.33
4.5V
1.21
1.95
5.5V
1.45
2.35
threshold voltage
1.65V
0.30
0.62
2.3V
0.37
0.80
3V
0.32
1.00
4.5V
0.50
1.20
5.5V
0.55
1.40
1.65V to 5.5V
VCC -0.1
IOH = -4mA
1.65V
0.95
IOH = -8mA
2.3V
1.7
Hysteresis
(VT+ - VT-)
IOH = -16mA
3V
IOH = -32mA
4.5V
IOL = 100μA
2.0
3.4
1.65V to 5.5V
0.1
1.65V
0.7
IOL = 8mA
2.3V
0.45
IOL = 16mA
3V
VI = 5.5V or GND
IOFF
Power Down Leakage Current VI or VO = 5.5V
ICC
Supply Current
VI = 5.5V of GND
IO=0
Unit
V
1.9
IOL = 4mA
IOL = 32mA
Input Current
1.50
2.3V
IOL = 24mA
II
3V
4.5V
1.65V
Negative-going input
High-level Input Voltage
Max
1.11
IOH = -24mA
VOL
Typ
2.3V
threshold voltage
High Level Output Voltage
Min
1.65V
Positive-going input
IOH = -100μA
VOH
VCC
Test Conditions
0.6
V
0.8
4.5
0.8
0 to 5.5V
± 100
μA
0
± 200
μA
1.65V to 5.5V
200
μA
3V to 5.5V
5000
μA
One input at VCC -0.6V
ΔICC
Additional Supply Current
Other inputs at VCC or
GND
74LVC1G58
Document number DS35126 Rev. 4 - 2
6 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Electrical Characteristics (All typical values are at VCC = 3.3V, TA = +25°C)
Symbol
CI
Parameter
VCC
Test Conditions
VI = VCC – or GND
Input Capacitance
Min
Typ
3.3
NEW PRODUCT
371
(Note 6)
X2-DFN1410-6
X2-DFN1010-6
510
SOT26
52
C/W
143
(Note 6)
X2-DFN1410-6
o
C/W
190
250
X2-DFN1010-6
Notes:
o
430
SOT363
Thermal Resistance Junctionto-Case
θJC
pF
204
SOT363
Thermal Resistance Junctionto-Ambient
Unit
3.5
SOT26
θJA
Max
6. Test condition for SOT26, SOT363, X2-DFN1410-6 and X2-DFN1010-6: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum
recommended pad layout.
Switching Characteristics
TA = -40°C to +85°C, CL = 30 or 50pF as noted (see Figure 1)
Parameter
tpd
From
TO
(Input)
(OUTPUT)
Any
Y
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
± 0.15V
± 0.2V
± 0.3V
± 0.5V
Min
Max
Min
Max
Min
Max
Min
Max
1.0
14.4
0.7
8.3
0.7
6.3
0.7
5.1
Unit
ns
TA = -40°C to +125°C, CL = 30 or 50pF as noted (see Figure 1)
Parameter
tpd
From
TO
(Input)
(OUTPUT)
Any
Y
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
± 0.15V
± 0.2V
± 0.3V
± 0.5V
Min
Max
Min
Max
Min
Max
Min
Max
1.0
18.0
0.7
10.4
0.7
7.9
0.7
6.4
Unit
ns
Operating Characteristics
TA = +25°C
Parameter
Cpd
Power dissipation
capacitance
74LVC1G58
Document number DS35126 Rev. 4 - 2
Test
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
Conditions
Typ.
Typ.
Typ.
Typ.
f = 10 MHz
22
22
23
24
7 of 15
www.diodes.com
Unit
pF
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
NEW PRODUCT
Parameter Measurement Information
Inputs
VCC
VM
CL
≤2ns
VCC/2
30pF
1KΩ
≤2ns
VCC/2
30pF
500Ω
3V
≤2.5ns
1.5V
50pF
500Ω
VCC
≤2.5ns
VCC/2
50pF
500Ω
VI
tr/tf
1.8V±0.15V
VCC
2.5V±0.2V
VCC
3.3V±0.3V
5V±0.5V
RL
Voltage Waveform
Pulse Duration
Voltage Waveform
Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1. Load Circuit and Voltage Waveforms
Notes:
A.
B.
C.
D.
Includes test lead and test apparatus capacitance.
All pulses are supplied at pulse repetition rate ≤ 10 MHz
Inputs are measured separately one transition per measurement
tPLH and tPHL are the same as tPD
74LVC1G58
Document number DS35126 Rev. 4 - 2
8 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Ordering Information
NEW PRODUCT
74LVC1G 58 XXX - 7
Logic Device
74 : Logic Prefix
LVC : 1.65 to 5.5V
Family
1G : One gate
Function
Package
58 : 3-Input
Configurable
Multiple-Function
Gate
Device
Package Code
74LVC1G58W6-7
W6
W6 : SOT26
DW : SOT363
FW4 : X2-DFN1010-6
FZ4 : X2-DFN1410-6
Packing
7 : Tape & Reel
7” Tape and Reel
Packaging
(Note 7)
Quantity
Part Number Suffix
SOT26
3000/Tape & Reel
-7
74LVC1G58DW-7
DW
SOT363
3000/Tape & Reel
-7
74LVC1G58FW4-7
FW4
X2-DFN1010-6
5000/Tape & Reel
-7
74LVC1G58FZ4-7
FZ4
X2-DFN1410-6
5000/Tape & Reel
-7
Notes:
7. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
74LVC1G58
Document number DS35126 Rev. 4 - 2
9 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Marking Information
NEW PRODUCT
7
7
(1) SOT26, SOT363
Part Number
Package
Identification Code
74LVC1G58W6
SOT26
TX
74LVC1G58DW
SOT363
TX
Part Number
Package
Identification Code
74LVC1G58FW4
X2-DFN1010-6
TX
74LVC1G58FZ4
X2-DFN1410-6
TX
(2) X2-DFN1010-6, X2-DFN1410-6
74LVC1G58
Document number DS35126 Rev. 4 - 2
10 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Package Outline Dimensions (All Dimensions in mm)
(1) SOT26
A
SOT26
Dim Min Max Typ
A
0.35 0.50 0.38
B
1.50 1.70 1.60
C
2.70 3.00 2.80
D
⎯
⎯ 0.95
H
2.90 3.10 3.00
J
0.013 0.10 0.05
K
1.00 1.30 1.10
L
0.35 0.55 0.40
M
0.10 0.20 0.15
0°
8°
α
⎯
All Dimensions in mm
NEW PRODUCT
B C
H
K
M
J
L
D
(2) SOT363
A
B C
H
K
J
M
D
74LVC1G58
Document number DS35126 Rev. 4 - 2
F
SOT363
Dim
Min
Max
A
0.10
0.30
B
1.15
1.35
C
2.00
2.20
D
0.65 Typ
F
0.40
0.45
H
1.80
2.20
J
0
0.10
K
0.90
1.00
L
0.25
0.40
M
0.10
0.22
0°
8°
α
All Dimensions in mm
L
11 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Package Outline Dimensions (All Dimensions in mm)
(3) X2-DFN1010-6
A1
NEW PRODUCT
A
A3
D
(Pin #1 ID)
e
b1
E
K
L(6x)
X2-DFN1010-6
Dim Min
Max
Typ
A
––
0.40
0.39
A1
0.00
0.05
0.02
A3
––
––
0.13
b
0.14
0.20
0.17
b1
0.05
0.15
0.10
D
0.95
1.05
1.00
E
0.95
1.05
1.00
e
––
––
0.35
L
0.35
0.45
0.40
K
0.15
––
––
Z
––
––
0.065
All Dimensions in mm
b(6x)
Z(4x)
(4) X2-DFN1410-6
A1
A3
A
Seating Plane
D
e
(Pin #1 ID)
L(6x)
E
Z1(4x)
Z(4x)
74LVC1G58
Document number DS35126 Rev. 4 - 2
Dim
A
A1
A3
b
D
E
e
L
Z
Z1
X2-DFN1410-6
Min
Max
Typ
0.39
––
0.40
0.02
0.00
0.05
0.13
––
––
0.15
0.25
0.20
1.35
1.45
1.40
0.95
1.05
1.00
0.50
––
––
0.25
0.35
0.30
––
––
0.10
0.045 0.105 0.075
All Dimensions in mm
b(6x)
12 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Suggest Pad Layout
(1) SOT26
C2
NEW PRODUCT
C2
C1
G
Z
Dimensions Value (in mm)
Z
3.20
G
1.60
X
0.55
Y
0.80
C1
C2
2.40
0.95
Y
X
(2) SOT363
C2
Dimensions Value (in mm)
Z
2.5
G
1.3
X
0.42
Y
0.6
C1
1.9
C2
0.65
C1
G
Z
C2
Y
X
(3) X2-DFN1010-6
X1
C
Dimensions
Y (6x)
C
G
X
X1
Y
Y1
Y1
Value
(in mm)
0.350
0.150
0.200
0.900
0.550
1.250
1
G(4x)
74LVC1G58
Document number DS35126 Rev. 4 - 2
X(6x)
13 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
Suggest Pad Layout
(4) X2-DFN1410-6
X1
C
NEW PRODUCT
Y(6x)
Dimensions
C
G
X
X1
Y
Y1
Y1
1
74LVC1G58
Document number DS35126 Rev. 4 - 2
G(4x)
Value
(in mm)
0.500
0.250
0.250
1.250
0.525
1.250
X(6x)
14 of 15
www.diodes.com
June 2012
© Diodes Incorporated
74LVC1G58
CONFIGURABLE MULTIPLE-FUNCTION GATE
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
74LVC1G58
Document number DS35126 Rev. 4 - 2
15 of 15
www.diodes.com
June 2012
© Diodes Incorporated