74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Description Pin Assignments The 74LVC1G58 is a single 3-input positive configurable multiple function gate with a standard totem pole output. The output state is determined by eight patterns of 3-bit input. The user can chose the logic functions AND, OR, NAND, NOR, XOR, inverter or non-inverting buffer. All inputs can be NEW PRODUCT connected to ground or Vcc as required. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The user is reminded that the device can simulate several types of logic gates, but may respond differently due to the Schmitt action at the inputs. Features Applications • Wide Supply Voltage Range from 1.65V to 5.5V • Voltage Level Shifting • ± 24mA Output Drive at 3.3V • General Purpose Logic • CMOS low power consumption • Power Down Signal Isolation • IOFF Supports Partial-Power-Down Mode Operation • Wide array of products such as: • Inputs accept up to 5.5V o PCs, networking, notebooks, netbooks, PDAs ESD Protection Exceeds JESD 22 o Computer peripherals, hard drives, CD/DVD ROM 200-V Machine Model (A115-A) o TV, DVD, DVR, set top box 2000-V Human Body Model (A114-A) o Cell Phones, Personal Navigation / GPS o MP3 players ,Cameras, Video Recorders • o o • Latch-Up Exceeds 100mA per JESD 78, Class II • Range of Package Options • SOT26, SOT363, and DFN1010: Available in “Green” Molding Compound (no Br, Sb) • Lead Free Finish/ RoHS Compliant (Note 1) Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 74LVC1G58 Document number DS35126 Rev. 1 - 2 1 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Pin Descriptions Pin Name In1 GND Ground In0 Data Input Y NEW PRODUCT Description Data Input Data Output Vcc Supply Voltage In2 Data Input Logic Diagram Function Table In2 L L L L H H H H Inputs In1 L L H H L L H H In0 L H L H L H L H 74LVC1G58 Document number DS35126 Rev. 1 - 2 Output Y L H L H H H L L 2 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Logic Configurations Vcc A Y B A 1 6 2 5 3 4 B Y A Y B NEW PRODUCT Configuration 2 2-Input AND Gate with A Input Inverted 2-Input NOR Gate with B input Inverted Function Selection Table Logic Function 2-input NAND Configuration 1 2-input NAND with both inputs inverted 4 2-input AND with inverted input 2,3 2-input NOR with inverted input 2,3 2-input OR 4 2-input OR with both inputs inverted 1 2-input XOR 5 1-input Buffer 6 74LVC1G58 Document number DS35126 Rev. 1 - 2 3 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Absolute Maximum Ratings (Note 2) Symbol Rating Unit 2 KV 200 V Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V Vo Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V Vo Voltage applied to output in high or low state -0.3 to VCC +0.5 V IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current -50 mA IO Continuous output current ±50 mA Continuous current through Vdd or GND ±100 mA Operating Junction Temperature -40 to 150 °C Storage Temperature -65 to 150 °C Human Body Model ESD Protection ESD MM Machine Model ESD Protection VCC NEW PRODUCT Description ESD HBM TJ TSTG Notes: 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 3) Symbol VCC Operating Voltage Parameter Min Max Unit Operating 1.65 5.5 V Data retention only 1.5 V VI Input Voltage 0 5.5 V VO Output Voltage 0 VCC V IOH High-level output current VCC = 1.65 V -4 VCC = 2.3 V -8 -16 VCC = 3 V -24 VCC = 4.5 V -32 VCC = 1.65 V 4 VCC = 2.3 V IOL Δt/ΔV TA Notes: Low-level output current Input transition rise or fall rate mA 8 16 VCC = 3 V mA 24 VCC = 4.5 V 32 VCC = 1.8 V ± 0.15V, 2.5 V ± 0.2 V 20 VCC = 3.3 V ± 0.3 V 10 VCC = 5 V ± 0.5 V 5 Operating free-air temperature -40 125 ns/V ºC 3. Unused inputs should be held at Vcc or Ground. 74LVC1G58 Document number DS35126 Rev. 1 - 2 4 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Electrical Characteristics NEW PRODUCT Symbol Parameter VT+ Positive-going input threshold voltage VT- Negative-going input threshold voltage ΔVT Hysteresis (VT+ - VT-) VOH VOL II IOFF ICC ΔICC TA=-40 °C to 85 °C Test Conditions IOH = -100μA IOH = -4mA IOH = -8mA High Level Output Voltage IOH = -16mA IOH = -24mA IOH = -32mA IOL = 100μA IOL = 4mA IOL = 8mA High-level Input Voltage IOL = 16mA IOL = 24mA IOL = 32mA Input Current VI = 5.5 V or GND Power Down Leakage VI or VO = 5.5V Current VI = 5.5V of GND Supply Current IO=0 One input at VCC –0.6 Additional Supply Current V Other inputs at VCC or GND 74LVC1G58 Document number DS35126 Rev. 1 - 2 (All typical values are at Vcc = 3.3V, TA = 25°C) Vcc 1.65 V 2.3V 3V 4.5 V 5.5 V 1.65 V 2.3V 3V 4.5 V 5.5 V 1.65 V 2.3V 3V 4.5 V 5.5 V 1.65 V to 5.5V 1.65 V 2.3V 3V 4.5 V 1.65 V to 5.5V 1.65 V 2.3V Min 0.70 1.11 1.50 2.16 2.61 0.30 0.58 0.80 1.21 1.45 0.30 0.40 0.35 0.55 0.60 VCC – 0.1 1.2 1.9 2.4 2.3 3.8 Typ. Max 1.20 1.60 2.00 2.74 3.33 0.72 1.00 1.30 1.95 2.35 0.62 0.80 1.00 1.10 1.20 Unit V 4.5 0 to 5.5 V 0.1 0.45 0.3 0.4 0.55 0.55 ±5 μA 0 ± 10 μA 1.65 V to 5.5V 10 μA 3 V to 5.5V 500 μA 3V 5 of 13 www.diodes.com V January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Electrical Characteristics Symbol NEW PRODUCT VT+ VT- ΔVT Parameter TA=-40 °C to 125 °C Test Conditions Vcc Min 1.65 V 0.70 1.20 2.3V 1.11 1.60 3V 1.50 2.00 4.5 V 2.16 2.74 5.5 V 2.61 3.33 1.65 V 0.30 0.75 2.3V 0.58 1.03 3V 0.80 1.33 4.5 V 1.21 1.95 5.5 V 1.45 2.35 1.65 V 0.30 0.62 2.3V 0.37 0.80 3V 0.32 1.00 4.5 V 0.50 1.20 5.5 V 0.55 1.40 1.65 V to 5.5V VCC – 0.1 IOH = -4mA 1.65 V 0.95 IOH = -8mA 2.3V 1.7 Positive-going input threshold voltage Negative-going input threshold voltage Hysteresis (VT+ - VT-) IOH = -100μA VOH (All typical values are at Vcc = 3.3V, TA = 25°C) High Level Output Voltage IOH = -16mA 3V IOH = -24mA VOL High-level Input Voltage 1.65 V to 5.5V 0.1 IOL = 4mA 1.65 V 0.7 IOL = 8mA 2.3V 0.45 3V Input Current VI = 5.5 V or GND IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current VI = 5.5V of GND IO=0 Additional Supply Current One input at VCC –0.6 V Other inputs at VCC or GND 74LVC1G58 Document number DS35126 Rev. 1 - 2 2.0 IOL = 100μA IOL = 16mA Unit V 1.9 4.5 V IOL = 32mA ΔICC Max IOH = -32mA IOL = 24mA II Typ. 3.4 0.6 V 0.8 4.5 0.8 0 to 5.5 V ± 100 μA 0 ± 200 μA 1.65 V to 5.5V 200 μA 3 V to 5.5V 5000 μA 6 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE NEW PRODUCT Electrical Characteristics (All typical values are at Vcc = 3.3V, TA = 25°C) Symbol Ci Parameter Input Capacitance θJA Thermal Resistance Junction-to-Ambient θJC Thermal Resistance Junction-to-Case Test Conditions Vi = VCC – or GND SOT26 SOT363 DFN1010 Vcc 3.3 (Note 4) (Note 4) (Note 4) SOT26 SOT363 (Note 4) (Note 4) (Note 4) DFN1010 Min Typ. 3.5 166 333 231 Max 46 102 TBD Unit pF o C/W o C/W Notes: 4. Test condition for SOT26, SOT363 and DFN1010: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. Switching Characteristics TA=-40 °C to 85 °C, CL = 30 or 50pF as noted (see Figure 1) Parameter tpd From (Input) TO (OUTPUT) Any Y Vcc = 1.8 V ± 0.15V Vcc = 2.5 V ± 0.2V Vcc = 3.3 V ± 0.3V Vcc = 5 V ± 0.5V Min Max Min Max Min Max Min Max 1.0 14.4 0.7 8.3 0.7 6.3 0.7 5.1 Unit ns TA=-40 °C to 125 °C, CL = 30 or 50pF as noted (see Figure 1) Parameter tpd From (Input) TO (OUTPUT) Any Y Vcc = 1.8 V ± 0.15V Vcc = 2.5 V ± 0.2V Vcc = 3.3 V ± 0.3V Vcc = 5 V ± 0.5V Min Max Min Max Min Max Min Max 1.0 18.0 0.7 10.4 0.7 7.9 0.7 6.4 Unit ns Operating Characteristics TA = 25 ºC Parameter Cpd Power dissipation capacitance 74LVC1G58 Document number DS35126 Rev. 1 - 2 Test Conditions Vcc = 1.8 V TYP Vcc = 2.5 V TYP Vcc = 3.3 V TYP Vcc = 5 V TYP Unit f = 10 MHz 22 22 23 24 pF 7 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE NEW PRODUCT Parameter Measurement Information Inputs Vcc VI VCC VCC 3V VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V tr/tf ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V VCC/2 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. B. C. D. Includes test lead and test apparatus capacitance. All pulses are supplied at pulse repetition rate ≤ 10 MHz Inputs are measured separately one transition per measurement tPLH and tPHL are the same as tPD Figure 1. Load Circuit and Voltage Waveforms 74LVC1G58 Document number DS35126 Rev. 1 - 2 8 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE NEW PRODUCT Ordering Information Device Package Code Packaging (Note 7) 74LVC1G58W6-7 74LVC1G58DW-7 74LVC1G58FW4-7 W6 DW FW4 SOT26 SOT363 DFN1010 Notes: 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel -7 3000/Tape & Reel -7 5000/Tape & Reel -7 7. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Marking Information (1) SOT26, SOT363 Part Number 74LVC1G58W6 74LVC1G58DW 74LVC1G58 Document number DS35126 Rev. 1 - 2 Package SOT26 SOT363 9 of 13 www.diodes.com Identification Code TX TX January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Marking Information (Continued) NEW PRODUCT (2) DFN1010 Part Number 74LVC1G58FW4 Package DFN1010 Identification Code TX Package Outline Dimensions (All Dimensions in mm) (1) Package Type: SOT26 74LVC1G58 Document number DS35126 Rev. 1 - 2 10 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Package Outline Dimensions (All Dimensions in mm) (2) Package Type: SOT363 CL 0.10/0.30 CL 1.9 1.15/1.35 CL 6x-0.42 CL 6x-0.60 NEW PRODUCT 2.0/2.2 4x-0.65 PIN 1 0.40/0.45 0.65Bsc. Land Pattern Recommendation (unit:mm) 0.1/0.22 0.9/1.0 1.8/2.2 0/0.1 1.10Max. CL "A" Detail"A" 0.25 Gauge Plane 0°/8 ° 0.25/0.40 Seating Plane Side View 0.08 C C 0.08 C Pin1 0.35Typ. 74LVC1G58 Document number DS35126 Rev. 1 - 2 0.14/0.20(6x) 0.15Min. A 0.35Typ. Pin1 0.15 0.95/1.05 0.15Min. 0.07Typ. 0.35/0.45(6x) 2x- 0.20(6x) 0.235 0.95/1.05 B 0.05/0.15 2X- 0/0.05 0.08 C 0.45(6x) 0.40Max. 0.05 C 6x- 0.13Typ. (3) Package Type: DFN1010 Land Pattern Recommendation (unit:mm) Top View 0.07 C A B Bottom View 11 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE Taping Orientation (Note 8) NEW PRODUCT For DFN1010 Notes: 8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf 74LVC1G58 Document number DS35126 Rev. 1 - 2 12 of 13 www.diodes.com January 2011 © Diodes Incorporated 74LVC1G58 CONFIGURABLE MULTIPLE-FUNCTION GATE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com 74LVC1G58 Document number DS35126 Rev. 1 - 2 13 of 13 www.diodes.com January 2011 © Diodes Incorporated