74AUP1G14

74AUP1G14
SINGLE SCHMITT-TRIGGER INVERTER
Description
Pin Assignments
The Advanced, Ultra Low Power (AUP) CMOS logic family is
designed for low power and extended battery life in portable
applications.
( Top View )
( Top View )
NC 1
The AUP1G14 is a single, one-input Schmitt-Trigger inverter gate
with a standard push-pull output designed for operation over a
power supply range of 0.8V to 3.6V. The device is fully specified
for partial power down applications using IOFF. The IOFF circuitry
5 Vcc
3
GND
A 2
GND
4 Y
3
SOT353
The gate performs the positive Boolean function:
( Top View )
NC
1
6
Vcc
A
2
5
NC
GND
3
4
Y
Y=A
Features
•
•
•
•
•
•
•
Advanced Ultra Low Power (AUP) CMOS
Supply Voltage Range from 0.8V to 3.6V
±4mA Output Drive at 3.0V
Low Static Power Consumption
ICC < 0.9µA
Low Dynamic Power Consumption
CPD = 6.2pF (Typical at 3.6V)
Schmitt Trigger Action at all inputs makes the circuit tolerant
for slower input rise and fall time. The hysteresis is typically
250mV at Vcc = 3.0V.
IOFF Supports Partial-Power-Down Mode Operation
ESD Protection Exceeds JESD 22
2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
Latch-Up Exceeds 100mA per JESD 78, Class I
Leadless Packages Named per JESD30E
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
4 Y
A 2
X2-DFN0808-4
disables the output, preventing damaging current backflow when
the device is powered down.
•
•
•
•
5 Vcc
NC 1
X2-DFN1410-6
( Bottom View )
GND 3
4Y
A2
5 NC
NC 1
6 Vcc
X2-DFN1409-6
Chip Scale
Alternative
( Top View )
NC
1
6
Vcc
A
2
5
NC
GND
3
4
Y
X2-DFN1010-6
( Top View )
NC
1
6
Vcc
A
2
5
NC
4 Y
GND 3
X1-DFN1010-6
Packages not to scale
Applications
•
•
Suited for Battery and Low Power Needs
Wide array of products such as:
Tablets, E-readers
Cell Phones, Personal Navigation / GPS Systems
MP3 Players, Cameras, Video Recorders
PCs, Ultrabooks, Notebooks, Netbooks
Computer Peripherals, Hard Drives, SSDs CD/DVD ROMs
TVs, DVDs, DVRs, Set-Top Boxes
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free,
"Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74AUP1G14
Document number: DS35152 Rev 6 - 2
1 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
Ordering Information
74AUP1G
Logic Device
14 :
1-Input
Schmitt Trigger
Inverter
Package
Code
Package
(Notes 4 & 5)
74AUP1G14SE-7
SE
SOT353
74AUP1G14FS3-7
FS3
X2-DFN0808-4
74AUP1G14FW5-7
FW5
X1-DFN1010-6
74AUP1G14FW4-7
FW4
X2-DFN1010-6
74AUP1G14FX4-7
FX4
X2-DFN1409-6
Chip Scale Alternative
74AUP1G14FZ4-7
FZ4
X2-DFN1410-6
Notes:
XXX
-7
Function
74 : Logic Prefix
AUP : 0.8 to 3.6 V
Logic Family
1G : One Gate
Device
14
Package
Packing
SE : SOT353
FS3 : X2-DFN0808-4
FW5 : X1-DFN1010-6
FW4 :X2-DFN1010-6
FX4 : X2- DFN1409-6
FZ4 : X2- DFN1410-6
Package
Size
2.0mm x 2.0mm x 1.1mm
0.65 mm lead pitch
0.8mm x 0.8mm x 0.35mm
0.5 mm pad pitch (diamond)
1.0mm x 1.0mm x 0.5mm
0.35 mm pad pitch
1.0mm x 1.0mm x 0.4mm
0.35 mm pad pitch
1.4mm x 0.9mm x 0.4mm
0.5 mm pad pitch
1.4mm x 1.0mm x 0.4mm
0.5 mm pad pitch
-7 : 7” Tape & Reel
7” Tape and Reel
Quantity
Part Number Suffix
3,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf.
Pin Descriptions
Logic Diagram
Pin Name
NC
A
GND
Y
No Connection
Data Input
Ground
Data Output
Function
VCC
Supply Voltage
Function Table
Inputs
A
H
L
Output
Y
L
H
74AUP1G14
Document number: DS35152 Rev 6 - 2
2 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
Absolute Maximum Ratings (Notes 6 & 7) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
Parameter
Human Body Model ESD Protection
Charged Device Model ESD Protection
Supply Voltage Range
VCC
VI
Input Voltage Range
Vo
Voltage Applied to Output in High or Low State
Rating
2
1
Unit
kV
kV
-0.5 to +4.6
V
-0.5 to +4.6
V
-0.5 to VCC +0.5
V
IIK
Input Clamp Current VI < 0
50
mA
IOK
Output Clamp Current (VO < 0 )
50
mA
±20
mA
IO
Continuous Output Current (VO = 0 to VCC)
ICC
Continuous Current Through VCC
50
mA
IGND
Continuous Current Through GND
-50
mA
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
TJ
TSTG
Notes:
6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could
cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.
Recommended Operating Conditions (Note 8) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Min
Max
Unit
0.8
3.6
V
V
VI
Input Voltage
0
3.6
VO
Output Voltage
0
VCC
V
VCC = 0.8V
—
-20
µA
VCC = 1.1V
—
-1.1
VCC = 1.4V
—
-1.7
VCC = 1.65V
—
-1.9
VCC = 2.3V
—
-3.1
VCC = 3.0V
—
-4
VCC = 0.8V
—
20
VCC = 1.1V
—
1.1
VCC = 1.4V
—
1.7
VCC = 1.65V
—
1.9
VCC = 2.3V
—
3.1
VCC = 3.0V
—
4
-40
125
IOH
IOL
TA
Note:
Parameter
Operating Voltage
High-Level Output Current
Low-Level Output Current
Operating Free-Air Temperature
mA
µA
mA
°C
8. Unused inputs should be held at VCC or Ground.
74AUP1G14
Document number: DS35152 Rev 6 - 2
3 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
0.8V to 3.6 V
VCC – 0.1
VCC – 0.1
IOH = -1.1mA
1.1V
0.75 x VCC
—
0.7 x VCC
—
IOH = -1.7mA
1.4V
1.11
—
1.03
—
High-Level Output IOH = -1.9mA
Voltage
IOH = -2.3mA
1.65V
1.32
—
1.30
—
2.05
—
1.97
—
Negative-Going
Input Threshold
Voltage
∆VT
Hysteresis
(VT+ - VT-)
—
—
—
IOH = -3.1mA
IOH = -2.7mA
ICC
∆ICC
—
1.85
—
—
2.67
—
V
V
V
—
2.55
—
IOL = 20µA
0.1
—
0.1
IOL = 1.1mA
1.1V
—
0.3 x VCC
—
0.3 x VCC
IOL = 1.7mA
1.4V
—
0.31
—
0.37
IOL = 1.9mA
1.65V
—
0.31
—
0.35
—
0.31
—
0.33
—
0.44
—
0.45
—
0.31
—
0.33
—
0.44
—
0.45
0V to 3.6V
—
± 0.1
—
± 0.5
µA
0
—
± 0.2
—
0.6
µA
0V to 0.2V
—
± 0.2
—
0.6
µA
0.8V to 3.6V
—
0.5
—
0.9
µA
3.3V
—
40
—
50
µA
IOL = 2.3mA
IOL = 4 mA
∆IOFF
1.9
2.72
V
—
IOL = 2.7mA
IOFF
3V
Unit
2.6
IOL = 3.1mA
Input Current
2.3V
Min
0.4
0.53
0.74
0.91
1.37
1.61
0.15
0.26
0.39
0.47
0.69
0.88
0.07
0.08
0.18
0.27
0.53
0.79
0.8V to 3.6V
IOH = -4mA
Low-Level Output
Voltage
0.8V
1.1V
1.4V
1.65V
2.3V
3.0V
0.8V
1.1V
1.4V
1.65V
2.3V
3.0V
0.8V
1.1V
1.4V
1.65V
2.3V
3.0V
Min
0.4
0.53
0.74
0.91
1.37
1.61
0.15
0.26
0.39
0.47
0.69
0.88
0.07
0.08
0.18
0.27
0.53
0.79
TA = -40°C to +85°C
IOH = -20µA
VT-
II
TA = +25°C
Max
0.65
0.9
1.11
1.29
1.77
2.32
0.4
0.65
0.75
0.84
1.04
1.24
0.5
0.46
0.56
0.66
0.92
1.31
—
Positive-Going
Input Threshold
Voltage
VOL
VCC
Max
0.65
0.9
1.11
1.29
1.77
2.32
0.4
0.65
0.75
0.84
1.04
1.24
0.5
0.46
0.56
0.66
0.92
1.31
—
VT+
VOH
Test Conditions
VI = GND to 3.6V
Power Down
VI or VO = 0V to 3.6V
Leakage Current
Delta Power Down
VI or VO = 0V to 3.6V
Leakage Current
Supply Current
VI = GND or VCC, IO = 0
Additional Supply
Current
Input at VCC –0.6V
74AUP1G14
Document number: DS35152 Rev 6 - 2
2.3V
3V
4 of 16
www.diodes.com
V
February 2015
© Diodes Incorporated
74AUP1G14
Electrical Characteristics (continued) (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
VT+
Positive-Going
Input Threshold
Voltage
VT-
Negative-Going
Input Threshold
Voltage
∆VT
Hysteresis
(VT+ - VT-)
VOH
High-Level
Output Voltage
Test Conditions
0.8V
1.1V
1.4V
1.65V
2.3V
3.0V
0.8V
1.1V
1.4V
1.65V
2.3V
3.0V
0.8V
1.1V
1.4V
1.65V
2.3V
3.0V
IOH = -20µA
0.8V to 3.6V
VCC – 0.11
IOH = -1.1mA
1.1V
0.6 x VCC
—
IOH = -1.7mA
1.4V
0.93
—
IOH = -1.9mA
1.65V
1.17
—
1.77
—
1.67
—
—
—
—
IOH = -2.3mA
—
2.30
—
0.8V to 3.6V
—
0.11
IOL = 1.1mA
1.1V
—
0.33 x VCC
IOL = 1.7mA
1.4V
—
0.41
Low-Level Output IOL = 1.9mA
Voltage
IOL = 2.3mA
1.65V
—
0.39
—
0.36
—
0.50
—
0.36
IOH = -4mA
IOL = 20µA
IOL = 3.1mA
IOL = 2.7mA
IOL = 4mA
IOFF
∆IOFF
ICC
∆ICC
2.3V
Max
0.65
0.9
1.11
1.29
1.77
2.32
0.4
0.65
0.75
0.84
1.04
1.24
0.5
0.46
0.56
0.66
0.92
1.31
—
2.40
IOH = -2.7mA
II
TA = -40°C to +125°C
Min
0.4
0.53
0.74
0.91
1.37
1.61
0.15
0.26
0.39
0.47
0.69
0.88
0.07
0.08
0.18
0.27
0.53
0.79
IOH = -3.1mA
VOL
VCC
Input Current
VI = GND to 3.6V
Power Down
VI or VO = 0V to 3.6V
Leakage Current
Delta Power
Down Leakage
VI or VO = 0V to 3.6V
Current
Supply Current
VI = GND or VCC, IO = 0
Additional Supply
Input at VCC -0.6V
Current
74AUP1G14
Document number: DS35152 Rev 6 - 2
3V
2.3V
3V
Unit
V
V
V
V
V
—
0.50
0V to 3.6V
—
± 0.75
µA
0
—
± 3.5
µA
0V to 0.2V
—
± 2.5
µA
0.8V to 3.6V
—
3.0
µA
3.3V
—
75
µA
5 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
Switching Characteristics
CL=5pF, See Figure 1
Parameter
tpd
From
Input
A or B
To
Output
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
To
Output
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
To
Output
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
To
Output
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
Min
—
2.0
1.5
1.2
1.0
0.8
TA = +25°C
Typ
19.9
8.5
4.3
3.7
3.0
2.8
Max
—
12.0
6.6
5.4
4.1
3.6
TA = -40°C to +85°C
Min
Max
—
—
2.0
13.1
1.5
7.1
1.2
6.0
1.0
4.5
0.8
3.9
TA = -40°C to +125°C
Min
Max
—
—
2.0
13.1
1.5
7.4
1.2
6.2
1.0
4.7
0.8
4.0
Min
—
2.5
2.0
1.7
1.4
1.2
TA = +25°C
Typ
23.4
8.7
5.0
4.2
3.6
3.3
Max
—
13.7
7.7
6.2
4.8
4.3
TA = -40°C to +85°C
Min
Max
—
—
2.5
13.8
2.0
8.2
1.7
6.7
1.4
5.2
1.2
4.5
TA = -40°C to +125°C
Min
Max
—
—
2.5
13.9
2.0
8.6
1.7
7.1
1.4
5.5
1.2
4.7
Min
—
2.9
2.3
2.1
1.7
1.5
TA = +25°C
Typ
26.9
9.2
5.5
4.7
4
3.8
Max
—
15.3
8.6
7
5.5
4.8
TA = -40°C to +85°C
Min
Max
—
—
2.9
17
2.3
9.4
2.1
7.7
1.7
5.9
1.5
5.2
TA = -40°C to +125°C
Min
Max
—
—
2.9
17
2.3
9.8
2.1
8.1
1.7
6.2
1.5
5.4
Min
—
3.9
3.2
2.9
2.5
2.3
TA = +25°C
Typ
37.3
11.2
7.1
6.0
5.2
4.8
Max
—
20.7
11.2
9.1
6.9
6.1
TA = -40°C to +85°C
Min
Max
—
—
3.9
22.5
3.2
12.3
2.9
10.0
2.5
7.5
2.3
7.1
TA = -40°C to +125°C
Min
Max
—
—
3.9
22.5
3.2
12.9
2.9
10.6
2.5
7.9
2.3
7.4
Unit
ns
CL=10pF, See Figure 1
Parameter
tpd
From
Input
A or B
Unit
ns
CL=15pF, See Figure 1
Parameter
tpd
From
Input
A or B
Unit
ns
CL=30pF, See Figure 1
Parameter
tpd
From
Input
A or B
74AUP1G14
Document number: DS35152 Rev 6 - 2
6 of 16
www.diodes.com
Unit
ns
February 2015
© Diodes Incorporated
74AUP1G14
Operating and Package Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
Note:
Test
Conditions
VCC
Typ
Unit
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
6.5
6.3
6.3
6.2
6.2
6.1
pF
0V or 3.3V
1.5
pF
—
—
—
—
—
—
—
—
—
—
—
—
371
430
435
445
470
460
143
240
250
250
275
265
Cpd
Power Dissipation
Capacitance
f = 1MHz
No Load
Ci
Input Capacitance
Vi = VCC or GND
SOT353
X2-DFN0808-4
X1-DFN1010-6
(Note 9)
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
SOT353
X2-DFN0808-4
X1-DFN1010-6
(Note 9)
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
θJA
Thermal Resistance
Junction-to-Ambient
θJC
Thermal Resistance
Junction-to-Case
°C/W
°C/W
9. Test condition for each of the six package types: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74AUP1G14
Document number: DS35152 Rev 6 - 2
7 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
Parameter Measurement Information
Vcc
Inputs
VM
CL
0.8V
VCC
tr/tf
≤3ns
VCC/2
5, 10, 15, 30pF
1.2V±0.1V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
1.8V ±0.15V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
2.5V±0.2V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
3.3V±0.3V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
1.5V±0.1V
VI
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1 Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74AUP1G14
Document number: DS35152 Rev 6 - 2
8 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
Marking Information
(1) SOT353
(Top View)
View)
4
7
5
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
XX Y W X
1
2
3
Part Number
74AUP1G14SE-7
Package
SOT353
Identification Code
XS
(2) X2-DFN0808-4, X1-DFN1010-6, X2-DFN1010-6 X2-DFN1409-6 and X2-DFN1410-6
(Top View)
XX
YWX
Part Number
74AUP1G14FS3-7
74AUP1G14FW5-7
74AUP1G14FW4-7
74AUP1G14FX4-7
74AUP1G14FZ4-7
74AUP1G14
Document number: DS35152 Rev 6 - 2
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
Package
X2-DFN0808-4
X1-DFN1010-6
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
9 of 16
www.diodes.com
Identification Code
YS
Q9
XS
HH
XS
February 2015
© Diodes Incorporated
74AUP1G14
SOT353
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A
B C
H
K
M
J
D
Z
L
F
C2
C2
Dimensions
Z
G
X
Y
C1
C2
C1
G
SOT353
Dim
Min
Max
Typ
A
0.10
0.30
0.25
B
1.15
1.35
1.30
C
2.00
2.20
2.10
D
0.65 Typ
F
0.40
0.45
0.425
H
1.80
2.20
2.15
J
0
0.10
0.05
K
0.90
1.00
1.00
L
0.25
0.40
0.30
M
0.10
0.22
0.11
0°
8°
α
All Dimensions in mm
Y
Value (in mm)
2.5
1.3
0.42
0.6
1.9
0.65
X
74AUP1G14
Document number: DS35152 Rev 6 - 2
10 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
X2-DFN0808-4
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A3
A1
A
Seating Plane
D
Pin #1 ID
e
R0.05 TYP
k
E
L1
D2
E2
X2-DFN0808-4
Dim
Min
Max
Typ
A
0.25 0.35
0.30
A1
0
0.04
0.02
A3
0.13
b
0.17 0.27
0.22
D
0.75 0.85
0.80
D2
0.15 0.35
0.25
E
0.75 0.85
0.80
E2
0.15 0.35
0.25
e
0.48
K
0.20
L
0.17 0.27
0.22
L1
0.02 0.12
0.07
Z
0.05
All Dimensions in mm
L
Z
b
X3
C
Y1
X2
Y
Dimensions
C
X
X1
X2
X3
Y
Y1
Y2
Y3
Y2
Y3
Value
(in
mm)
0.480
0.320
0.300
0.106
0.800
0.320
0.300
0.106
0.900
X1
X
74AUP1G14
Document number: DS35152 Rev 6 - 2
11 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
X1-DFN1010-6 (Type B)
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
Seating Plane
X1-DFN1010-6
(Type B)
Dim Min Max
Typ
A
0.50
0.39
A1
0.04
b
0.12 0.20
0.15
D
0.95 1.050 1.00
E
0.95 1.050 1.00
e
0.35 BSC
e1
0.55 BSC
L3 0.27 0.30
0.30
L3a 0.32 0.40
0.35
All Dimensions in mm
D
e
L3a
E
L3(5x)
e1
(Pin #1 ID)
b
C
X1
Y(4x)
Y2
Y3
G
G1
Y1
Pin1
74AUP1G14
Document number: DS35152 Rev 6 - 2
Dimensions
C
G
G1
X
X1
Y
Y1
Y2
Y3
Value
(in mm)
0.350
0.150
0.150
0.200
0.900
0.500
0.525
0.475
1.150
X
12 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
X2-DFN1010-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
A3
D
(Pin #1 ID)
e
b1
E
K
L(6x)
b(6x)
Z(4x)
X1
C
Y (6x)
C
G
X
X1
Y
Y1
Y1
1
G(4x)
74AUP1G14
Document number: DS35152 Rev 6 - 2
Dimensions
Value
(in mm)
0.350
0.150
0.200
0.900
0.550
1.250
X(6x)
13 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
X2-DFN1409-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
A3
Seating Plane
D
e1
(Pin #1 ID)
Ø(6x)
e2
X2-DFN1409-6
Dim Min Max Typ
A
0.40 0.39
A1
0
0.05 0.02
A3
0.13
Ø
0.20 0.30 0.25
D
1.35 1.45 1.40
E
0.85 0.95 0.90
e1
0.50
e2
0.50
Z1
0.075
Z2
0.075
All Dimensions in mm
E
Z1(4x)
Z2(4x)
C
D (6x)
Y
C1
G1
Pin1
X
74AUP1G14
Document number: DS35152 Rev 6 - 2
G
14 of 16
www.diodes.com
Dimensions
Value
(in mm)
C
C1
D
G
G1
X
Y
1.000
0.500
0.300
0.200
0.200
0.400
0.150
February 2015
© Diodes Incorporated
74AUP1G14
X2-DFN1410-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A3
A
Seating Plane
D
e
(Pin #1 ID)
L(6x)
X2-DFN1410-6
Dim
Min
Max
Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.15 0.25 0.20
D
1.35 1.45 1.40
E
0.95 1.05 1.00
e
––
––
0.50
L
0.25 0.35 0.30
Z
––
––
0.10
Z1
0.045 0.105 0.075
All Dimensions in mm
E
Z1(4x)
Z(4x)
b(6x)
X1
C
Dimensions
Y(6x)
C
G
X
X1
Y
Y1
Y1
1
G(4x)
74AUP1G14
Document number: DS35152 Rev 6 - 2
Value
(in mm)
0.500
0.250
0.250
1.250
0.525
1.250
X(6x)
15 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G14
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes
Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales
channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify
and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly
or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and
markings noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the
express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for
use provided in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems,
and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and
its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or
systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
74AUP1G14
Document number: DS35152 Rev 6 - 2
16 of 16
www.diodes.com
February 2015
© Diodes Incorporated