74AUP1G09

74AUP1G09
SINGLE 2 INPUT POSITIVE AND GATE WITH OPEN DRAIN OUTPUT
Description
Pin Assignments
The Advanced, Ultra Low Power (AUP) CMOS logic family is
designed for low power and extended battery life in portable
applications.
The AUP1G09 is a single AND gate with an open drain output
designed for operation over a power supply range of 0.8V to 3.6V.
The device is fully specified for partial power down applications
using IOFF. The IOFF circuitry disables the output preventing
damaging current backflow when the device is powered down. The
gate performs the positive Boolean function:
Y = A • B or Y = A + B
Features
•
•
•
•
Advanced Ultra Low Power (AUP) CMOS
Supply Voltage Range from 0.8V to 3.6V
4mA Output Drive at 3.0V
Low Static Power Consumption
ICC < 0.9µA
•
Low Dynamic Power Consumption
CPD = 6 pF (Typical at 3.6V)
•
Schmitt Trigger Action at all inputs makes the circuit tolerant
for slower input rise and fall time. The hysteresis is typically
250 mV at VCC = 3.0V.
IOFF Supports Partial-Power-Down Mode Operation
•
•
•
•
•
•
ESD Protection Exceeds JESD 22
2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
Latch-Up Exceeds 100mA per JESD 78, Class I
Leadless Packages Named per JESD30E
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
Applications
•
•
Suited for Battery and Low Power Needs
Wide array of products such as:
Tablets, E-readers
Cell Phones, Personal Navigation / GPS
MP3 Players ,Cameras, Video Recorders
PCs, Ultrabooks, Notebooks, Netbooks
Computer Peripherals, Hard Drives, SSDs, CD/DVD ROMs
TVs, DVDs, DVRs, Set-Top Boxes
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74AUP1G09
Document number: DS35151 Rev. 5 - 2
1 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
Ordering Information
74AUP1G
Logic Device
09 :
Package
2-Input
AND Gate
With Open Drain
Output
Package
Code
Package
(Notes 4 & 5)
74AUP1G09SE-7
SE
SOT353
74AUP1G09FS3-7
FS3
X2-DFN0808-4
74AUP1G09FW5-7
FW5
X1-DFN1010-6
74AUP1G09FW4-7
FW4
X2-DFN1010-6
74AUP1G09FX4-7
FX4
X2-DFN1409-6
Chip Scale Alternative
74AUP1G09FZ4-7
FZ4
X2-DFN1410-6
Notes:
XXX -7
Function
74 : Logic Prefix
AUP : 0.8 to 3.6 V
Logic Family
1G : One Gate
Device
09
SE : SOT353
FS3 : X2-DFN0808-4
FW5 : X1-DFN1010-6
FW4 :X2-DFN1010-6
FX4 : X2- DFN1409-6
FZ4 : X2- DFN1410-6
Package
Size
2.0mm x 2.0mm x 1.1mm
0.65 mm lead pitch
0.8mm x 0.8mm x 0.35mm
0.5 mm pad pitch (diamond)
1.0mm x 1.0mm x 0.5mm
0.35 mm pad pitch
1.0mm x 1.0mm x 0.4mm
0.35 mm pad pitch
1.4mm x 0.9mm x 0.4mm
0.5 mm pad pitch
1.4mm x 1.0mm x 0.4mm
0.5 mm pad pitch
Packing
-7 : 7” Tape & Reel
7” Tape and Reel
Quantity
Part Number Suffix
3,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf.
Pin Descriptions
Pin Name
A
B
GND
Y
Logic Diagram
Function
Data Input
Data Input
Ground
Data Output
VCC
Supply Voltage
Function Table
Inputs
A
L
L
H
H
B
L
H
L
H
74AUP1G09
Document number: DS35151 Rev. 5 - 2
Output
Y
L
L
L
Z
2 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
Absolute Maximum Ratings (Notes 6 & 7) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
Parameter
Human Body Model ESD Protection
Charged Device Model ESD Protection
Rating
2
1
Unit
kV
kV
Supply Voltage Range
-0.5 to +4.6
V
VI
Input Voltage Range
-0.5 to +4.6
V
Vo
Voltage applied to output in High or Low State
-0.5 to +4.6
V
VCC
IIK
Input Clamp Current VI < 0
50
mA
IOK
Output Clamp Current (VO < 0 )
50
mA
IO
Continuous Output Current (VO = 0 to VCC)
±20
mA
ICC
Continuous Current Through VCC
50
mA
IGND
Continuous Current Through GND
-50
mA
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
TJ
TSTG
Notes:
6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could
cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.
Recommended Operating Conditions (Note 8) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Parameter
Operating Voltage
Max
Unit
0.8
3.6
V
VI
Input Voltage
0
3.6
V
VO
Output Voltage
0
3.6
V
VCC = 0.8V
—
20
µA
VCC = 1.1V
—
1.1
VCC = 1.4V
—
1.7
VCC = 1.65V
—
1.9
VCC = 2.3V
—
3.1
VCC = 3.0V
—
4
VCC = 0.8V to 3.6V
—
200
ns/V
-40
125
°C
IOL
Low-Level Output Current
∆t/∆V
Input Transition Rise or Fall Rate
TA
Operating Free-Air Temperature
Note:
Min
mA
8. Unused inputs should be held at VCC or Ground.
74AUP1G09
Document number: DS35151 Rev. 5 - 2
3 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
VIH
High-Level
Input Voltage
VIL
Low-Level
Input voltage
VOL
Low-Level
Output
Voltage
IOFF
IOZ
∆IOFF
ICC
∆ICC
Power Down
Leakage
Current
Z State
Leakage
Current
Delta Power
Down
Leakage
Current
Unit
—
0.8V to 1.65V
—
1.65V to 1.95V
—
—
—
2.3V to 2.7V
3.0V to 3.6V
0.8V to 1.65V
0.65 x VCC
1.6
2.0
—
—
1.65V to 1.95V
—
—
—
2.3V to 2.7V
3.0V to 3.6V
IOL = 20µA
0.8V to 3.6V
—
—
—
0.1
—
—
—
IOL = 1.1mA
1.1V
—
0.3 x VCC
—
0.3 x VCC
IOL = 1.7mA
1.4V
—
0.31
—
0.37
1.65V
—
0.31
—
0.35
—
0.31
—
0.33
IOL = 1.9mA
IOL = 2.3mA
IOL = 2.7mA
Input Current
TA = -40°C to +85°C
Min
Max
—
0.80 x VCC
VCC
IOL = 3.1mA
II
TA = +25°C
Max
—
0.80 x VCC
Test Conditions
IOL = 4mA
A or B Input
VI = GND to 3.6V
VI or VO = 0V to
3.6V
VO = 3.6V
Vi = 3.6V
Min
2.3V
3V
0V to 3.6V
—
—
—
0.30 x VCC
0.35 x VCC
0.7
0.9
—
0.45
0.33
—
0.44
—
0.45
—
± 0.1
Additional
Supply
Current
Input at
VCC -0.6V
—
4 of 16
www.diodes.com
µA
± 0.5
µA
± 0.5
µA
0.6
µA
0.9
µA
50
µA
—
0.2
—
± 0.5
—
± 0.2
0.8V to 3.6V
V
—
—
Document number: DS35151 Rev. 5 - 2
—
V
0.1
—
—
VI = GND or VCC
IO = 0
0.35 x VCC
0.7
0.9
0.44
3.6V
Supply
Current
0.30 x VCC
0.31
± 0.2
0V to 0.2V
V
—
—
—
—
VI or VO = 0V to
3.6V
74AUP1G09
—
—
—
0
3.3V
0.65 x VCC
1.6
2.0
—
0.5
40
—
—
February 2015
© Diodes Incorporated
74AUP1G09
Electrical Characteristics (continued) (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
VIH
High-Level Input
Voltage
VIL
Low-Level Input
Voltage
VOL
Low-Level Output
Voltage
VCC
—
0.8V to 1.65V
—
1.65V to 1.95V
—
—
—
2.3V to 2.7V
3.0V to 3.6V
0.8V to 1.65V
0.70 x VCC
1.6
2.0
—
—
1.65V to 1.95V
—
—
—
2.3V to 2.7V
3.0V to 3.6V
1.1V
—
0.3 x VCC
IOL = 1.7 mA
1.4V
—
0.41
1.65V
—
0.39
—
0.36
IOL = 2.3 mA
IOL = 4 mA
A or B Input
VI = GND to 3.6V
Power Down
Leakage Current
VI or VO = 0V to 3.6V
IOZ
Z State
Leakage Current
VO = 3.6V
Vi = 3.6V
Delta Power Down
Leakage Current
VI or VO = 0V to 3.6V
Supply Current
VI = GND or VCC, IO = 0
Additional Supply
Current
Input at VCC -0.6V
ICC
∆ICC
74AUP1G09
Document number: DS35151 Rev. 5 - 2
0.35 x VCC
0.7
0.9
0.8V to 3.6V
IOL = 1.9 mA
2.3V
3V
0V to 3.6V
0
3.6V
0V to 0.2V
—
0.50
0.36
—
0.50
—
—
—
V
V
0.11
—
—
Unit
0.25 x VCC
IOL = 1.1 mA
IOFF
∆IOFF
—
—
IOL = 20 µA
IOL = 2.7 mA
Input Current
—
—
—
—
IOL = 3.1 mA
II
TA = -40°C to +125°C
Min
Max
—
0.80 x VCC
Test Conditions
V
± 0.75
µA
± 3.5
µA
± 1.5
µA
± 2.5
µA
0.8V to 3.6V
—
3.0
µA
3.3V
—
75
µA
5 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
Switching Characteristics
CL=5pF, See Figure 1
Parameter
tpd
From
Input
A
TO
OUTPUT
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
TO
OUTPUT
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
TO
OUTPUT
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
TO
OUTPUT
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
Min
—
1.9
1.5
1.2
1.0
0.9
TA = +25°C
Typ
Max
13.5
—
4.6
10.4
3.3
6.5
2.9
5.1
2.4
4.4
2.3
4.0
TA = -40°C to +85°C
Min
Max
—
—
1.8
11.4
1.4
7.4
1.1
5.9
0.9
4.6
0.8
4.5
TA = -40°C to +125°C
Min
Max
—
—
1.8
12.6
1.4
8.2
1.1
6.5
0.9
4.9
0.8
4.9
Min
—
2.3
1.8
1.6
1.4
1.3
TA = +25°C
Typ
Max
16.3
—
5.6
12.3
4.1
7.6
3.2
7.3
2.9
6.1
2.9
5.7
TA = -40°C to +85°C
Min
Max
—
—
2.1
13.7
1.7
8.8
1.4
7.1
1.2
6.4
1.1
5.4
TA = -40°C to +125°C
Min
Max
—
—
2.1
15.1
1.7
9.7
1.4
7.0
1.2
5.9
1.1
5.9
Min
—
2.6
2.1
1.9
1.6
1.6
TA = +25°C
Typ
Max
19.0
—
7.6
14.2
6.5
12.1
5.5
9.6
4.6
8.1
4.1
7.5
TA = -40°C to +85°C
Min
Max
—
—
2.4
15.8
1.9
12.7
1.7
10.1
1.5
9.1
1.4
8.3
TA = -40°C to +125°C
Min
Max
—
—
2.4
17.4
1.9
12.9
1.7
10.3
1.5
9.3
1.4
9.1
Min
—
3.6
2.9
2.6
2.4
2.3
TA = +25°C
Typ
27
9.5
8.5
7.7
7
6.5
TA = -40°C to +85°C
Min
Max
—
—
3.2
21.8
2.6
13.6
2.3
13.3
2.1
13.3
2.1
12.9
TA = -40°C to +125°C
Min
Max
—
—
3.2
24
2.6
15
2.3
14.6
2.1
13.5
2.1
12.9
Unit
ns
CL=10pF, See Figure 1
Parameter
tpd
From
Input
A
Unit
ns
CL=15pF, See Figure 1
Parameter
tpd
From
Input
A
Unit
ns
CL=30pF, See Figure 1
Parameter
tpd
From
Input
A
74AUP1G09
Document number: DS35151 Rev. 5 - 2
Max
—
19.5
16.1
15.2
13.1
12.7
6 of 16
www.diodes.com
Unit
ns
February 2015
© Diodes Incorporated
74AUP1G09
Operating and Package Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
Note:
Test
Conditions
VCC
Typ
Unit
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
6.5
6.3
6.3
6.2
6.2
6.1
pF
0V or 3.3V
1.5
pF
—
—
—
—
—
—
—
—
—
—
—
—
371
430
435
445
470
460
143
240
250
250
275
265
Cpd
Power Dissipation
Capacitance
f = 1MHz
No Load
Ci
Input Capacitance
Vi = VCC or GND
SOT353
X2-DFN0808-4
X1-DFN1010-6
(Note 9)
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
SOT353
X2-DFN0808-4
X1-DFN1010-6
(Note 9)
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
θJA
Thermal Resistance
Junction-to-Ambient
θJC
Thermal Resistance
Junction-to-Case
°C/W
°C/W
9. Test condition for each of the six package types: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74AUP1G09
Document number: DS35151 Rev. 5 - 2
7 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
Parameter Measurement Information
Inputs
Vcc
0.8 V
1.2 V±0.1 V
1.5 V±0.1 V
1.8 V±0.15 V
2.5 V±0.2 V
3.3 V±0.3 V
VI
tr/tf
VCC
VCC
VCC
VCC
VCC
VCC
≤3ns
≤3ns
≤3ns
≤3ns
≤3ns
≤3ns
TEST
Condition
tPLZ (see Notes D and E)
tPZL(see Notes D and F)
Vload
Vload
VM
VLOAD
CL
RL
V∆
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
2 X VCC
2 X VCC
2 X VCC
2 X VCC
2 X VCC
2 X VCC
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5KΩ
5KΩ
5KΩ
5KΩ
5KΩ
5KΩ
0.1V
0.1V
0.15V
0.15V
0.15V
0.3V
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1 Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74AUP1G09
Document number: DS35151 Rev. 5 - 2
8 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
Marking Information
(1) SOT353
(Top View)
View)
4
7
5
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
XX Y W X
1
2
3
Part Number
74AUP1G09SE
Package
SOT353
Identification Code
XR
(2) X2-DFN0808-4, X1-DFN1010-6, X2-DFN1010-6, X2-DFN1409-6 and X2-DFN1410-6
(Top View)
XX
YWX
Part Number
74AUP1G09FS3
74AUP1G09FW5
74AUP1G09FW4
74AUP1G09FX4
74AUP1G09FZ4
74AUP1G09
Document number: DS35151 Rev. 5 - 2
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
Package
X2-DFN0808-4
X1-DFN1010-6
X2-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
9 of 16
www.diodes.com
Identification Code
YU
Q8
XR
HG
XR
February 2015
© Diodes Incorporated
74AUP1G09
SOT353
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A
SOT353
Dim
Min
Max
Typ
A
0.10
0.30
0.25
B
1.15
1.35
1.30
C
2.00
2.20
2.10
D
0.65 Typ
F
0.40
0.45
0.425
H
1.80
2.20
2.15
J
0
0.10
0.05
K
0.90
1.00
1.00
L
0.25
0.40
0.30
M
0.10
0.22
0.11
0°
8°
α
All Dimensions in mm
B C
H
K
M
J
D
C2
Z
L
F
C2
Dimensions
Z
G
X
Y
C1
C2
C1
G
Y
Value (in mm)
2.5
1.3
0.42
0.6
1.9
0.65
X
74AUP1G09
Document number: DS35151 Rev. 5 - 2
10 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
X2-DFN0808-4
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A3
A1
A
Seating Plane
D
Pin #1 ID
e
R0.05 TYP
k
E
L1
D2
E2
X2-DFN0808-4
Dim
Min
Max
Typ
A
0.25 0.35
0.30
A1
0
0.04
0.02
A3
0.13
b
0.17 0.27
0.22
D
0.75 0.85
0.80
D2
0.15 0.35
0.25
E
0.75 0.85
0.80
E2
0.15 0.35
0.25
e
0.48
K
0.20
L
0.17 0.27
0.22
L1
0.02 0.12
0.07
Z
0.05
All Dimensions in mm
L
Z
b
X3
C
Y1
X2
Y
Dimensions
C
X
X1
X2
X3
Y
Y1
Y2
Y3
Y2
Y3
Value
(in
mm)
0.480
0.320
0.300
0.106
0.800
0.320
0.300
0.106
0.900
X1
X
74AUP1G09
Document number: DS35151 Rev. 5 - 2
11 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
X1-DFN1010-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
Seating Plane
X1-DFN1010-6
Dim Min Max
Typ
A
0.50
0.39
A1
0.04
b
0.12 0.20
0.15
D
0.95 1.050 1.00
E
0.95 1.050 1.00
e
0.35 BSC
e1
0.55 BSC
L3 0.27 0.30
0.30
L3a 0.32 0.40
0.35
All Dimensions in mm
D
e
L3a
E
L3(5x)
e1
(Pin #1 ID)
b
C
X1
Y(5x)
Y2
Y3
G
G1
Y1
Pin1
X
74AUP1G09
Document number: DS35151 Rev. 5 - 2
12 of 16
www.diodes.com
Dimensions
Value
(in mm)
C
G
G1
X
X1
Y
Y1
Y2
Y3
0.350
0.150
0.150
0.200
0.900
0.500
0.525
0.475
1.150
February 2015
© Diodes Incorporated
74AUP1G09
X2-DFN1010-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
A3
X2-DFN1010-6
Dim Min Max
Typ
A
–– 0.40
0.39
A1 0.00 0.05
0.02
A3
––
––
0.13
b
0.14 0.20
0.17
b1 0.05 0.15
0.10
D
0.95 1.05
1.00
E
0.95 1.05
1.00
e
––
––
0.35
L
0.35 0.45
0.40
K
0.15 ––
––
Z
––
––
0.065
All Dimensions in mm
D
(Pin #1 ID)
e
b1
E
K
L(6x)
b(6x)
Z(4x)
X1
C
Dimensions
Y (6x)
C
G
X
X1
Y
Y1
Y1
Value
(in mm)
0.350
0.150
0.200
0.900
0.550
1.250
1
G(4x)
74AUP1G09
Document number: DS35151 Rev. 5 - 2
X(6x)
13 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
X2-DFN1409-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
A3
Seating Plane
D
e1
(Pin #1 ID)
Ø(6x)
e2
X2-DFN1409-6
Dim Min Max Typ
A
0.40 0.39
A1
0
0.05 0.02
A3
0.13
Ø
0.20 0.30 0.25
D
1.35 1.45 1.40
E
0.85 0.95 0.90
e1
0.50
e2
0.50
Z1
0.075
Z2
0.075
All Dimensions in mm
E
Z1(4x)
Z2(4x)
C
D (6x)
Y
C1
G1
Pin1
X
74AUP1G09
Document number: DS35151 Rev. 5 - 2
G
14 of 16
www.diodes.com
Dimensions
Value
(in mm)
C
C1
D
G
G1
X
Y
1.000
0.500
0.300
0.200
0.200
0.400
0.150
February 2015
© Diodes Incorporated
74AUP1G09
X2-DFN1410-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A3
A
Seating Plane
D
e
(Pin #1 ID)
L(6x)
X2-DFN1410-6
Dim
Min
Max
Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.15 0.25 0.20
D
1.35 1.45 1.40
E
0.95 1.05 1.00
e
––
––
0.50
L
0.25 0.35 0.30
Z
––
––
0.10
Z1
0.045 0.105 0.075
All Dimensions in mm
E
Z1(4x)
Z(4x)
b(6x)
X1
C
Dimensions
Y(6x)
C
G
X
X1
Y
Y1
Y1
1
G(4x)
74AUP1G09
Document number: DS35151 Rev. 5 - 2
Value
(in mm)
0.500
0.250
0.250
1.250
0.525
1.250
X(6x)
15 of 16
www.diodes.com
February 2015
© Diodes Incorporated
74AUP1G09
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for
use provided in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
74AUP1G09
Document number: DS35151 Rev. 5 - 2
16 of 16
www.diodes.com
February 2015
© Diodes Incorporated