Section Part Page Date Dimension Prints for Above NEMA Motors ANSS-60000-0403 1.2 3 2 04/03 Type CGII – Horizontal – Weather Protected Type II Sleeve Bearing With Provisions For External Proximity Probes – Direct Connected Frames 1122 / 1124 – 2 Pole Standard Dimensions in Inches 2 Shaft Frame Speed B BA C 2F N-W R S Short 1122 2 Pole 88.0 17.50 119.4 76.0 9.00 4.550 Short 1124 2 Pole 96.0 17.50 127.4 84.0 9.00 4.550 3 ES Approx. Ship Wt. (Lbs.) 8.60 7.75 30700 8.60 7.75 35500 U V 1.25 5.25 1.25 5.25 4 Notes 1. 2. 3. 4. 5. 6. 7. See Section 3 for selection of main terminal box. R = Bottom of key to opposite side of shaft. S = Width of keyseat. V = Length of shaft available for coupling. Jackscrew holes and dowel holes are provided at each foot. Shims may be necessary under motor feet for direct connection. 8. 9. 10. All machines may rotate in one direction only. Rotor end float = 0.5” End float of LEF coupling = 0.19” For motors without provisions for externally mounted proximity probes, use print in Part 2 of this section. Lubrication Per Bearing 2 Pole 140-160 SUS @ 100ºF 5.0 qt. capacity Certification Customer HP P.O. RPM Rotation Facing Shaft Extension S.O. PH/HZ/Volts 3-60- FRAME CW CCW By Not for construction, installation or application purposes unless certified. Item Either Date