A Product Line of Diodes Incorporated DXT2012P5 ADVANCE INFORMATION 60V PNP MEDIUM POWER TRANSISTOR PowerDI®5 Features Mechanical Data • • • • • • • • • • 43% smaller than SOT223; 60% smaller than TO252 Maximum height just 1.1mm Rated up to 3.2W VCEO = 60V IC = -5.5A; ICM = 15A Low Saturation voltage Lead, Halogen, and Antimony Free/RoHS Compliant (Note 1) “Green” Device (Note 2) • • • ® Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.093 grams (approximate) Applications • • Motor driver Regulator circuit C B Top View Bottom View Device Schematic E Pin-out diagram Ordering Information (Note 3) Part Number DXT2012P5-13 Notes: Case ® PowerDI 5 Packaging 5000/Tape & Reel 1. No purposefully added lead. Halogen and Antimony Free. 2. Diodes Inc’s “Green” Policy can be found on our website at http://www.diodes.com 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information DXT2012 YYWWK PowerDI is a registered trademark of Diodes DXT2012P5 Document number: DS32070 Rev. 2 - 2 DXT2012 = Product Type Marking Code = Manufacturers’ Code Marking K = Factory Designator YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 09 for 2009) WW = Week code 01 to 53 1 of 7 www.diodes.com March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT2012P5 ADVANCE INFORMATION Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value -100 -60 -7 -5.5 -15 Unit V V V A A Symbol PD RθJA PD RθJA PD RθJA RθJT TJ, TSTG Value 3.2 39 1.7 75 0.74 169 5.6 -55 to +150 Unit W °C/W W °C/W W °C/W °C/W °C Thermal Characteristics Characteristic Power Dissipation @ TA = 25°C (Note 4) Thermal Resistance, Junction to Ambient Air (Note 4) @TA = 25°C Power Dissipation @ TA = 25°C (Note 5) Thermal Resistance, Junction to Ambient Air (Note 5) @TA = 25°C Power Dissipation @ TA = 25°C (Note 6) Thermal Resistance, Junction to Ambient Air (Note 6) @TA = 25°C Thermal Resistance, Junction to Collector Terminal Operating and Storage Temperature Range Notes: 4. Device mounted on FR-4 PCB, single sided 2 oz. copper, collector pad dimensions 50mm x 50mm. 5. Device mounted on FR-4 PCB, single sided 1 oz. copper, collector pad dimensions 25mm x 25mm. 6. Device mounted on FR-4 PCB, 2 single sided 1oz. copper, minimum recommended pad layout. PowerDI is a registered trademark of Diodes DXT2012P5 Document number: DS32070 Rev. 2 - 2 2 of 7 www.diodes.com March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT2012P5 1 DC 1s 100ms 10ms 1ms Single Pulse. T amb=25°C 100µs See note 3 10m 100m 1 10 100 -VCE Collector-Emitter Voltage (V) Max Power Dissipation (W) -IC Collector Current (A) 10 Limited 100m 3.0 2.5 See note 3 2.0 See note 4 1.5 See note 5 1.0 0.5 0.0 0 25 See note 3 30 D=0.5 20 D=0.2 Single Pulse 10 D=0.05 0 100µ D=0.1 1m 10m 100m 1 10 100 1k Pulse Width (s) 100 125 150 175 Single Pulse. T amb=25°C 100 See note 3 10 1 100µ 1m 10m 100m 1 10 100 1k Pulse Width (s) Transient Thermal Impedance Pulse Power Dissipation 4 180 T (amb)=25°C T (amb)=25°C Power Rating (W) 160 140 1 oz. weight Copper 120 100 80 60 40 75 Derating Curve Max Power Dissipation (W) Thermal Resistance (°C/W) 40 50 Temperature (°C) Safe Operating Area Thermal Resistance (°C/W) ADVANCE INFORMATION 3.5 VCE(sat) 2 oz. weight Copper 20 10 100 1000 10000 3 2 oz. weight Copper 2 1 1 oz. weight Copper 0 10 Copper Area (sq mm) Thermal Resistance vs. Cu Area PowerDI is a registered trademark of Diodes DXT2012P5 Document number: DS32070 Rev. 2 - 2 100 1000 10000 Copper Area (sq mm) 3 of 7 www.diodes.com Power Rating vs. Cu Area March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT2012P5 ADVANCE INFORMATION Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 7) Emitter-Base Breakdown Voltage Symbol V(BR)CBO V(BR)CEO V(BR)EBO Min -100 -60 -7 ICBO − − Emitter Cutoff Current ICER R≤1kΩ IEBO Collector-Emitter Saturation Voltage (Note 7) VCE(sat) Base-Emitter Saturation Voltage (Note 7) Base-Emitter Turn-On Voltage (Note 7) VBE(sat) VBE(on) Collector Cutoff Current Collector Cutoff Current Typ -120 -80 -8.1 <1 − <1 − <1 Max − − − -20 -0.5 -20 -0.5 -10 Unit V V V nA μA nA μA nA − − − − − − − -15 -55 -90 -195 -25 -70 -120 -250 mV -1030 -920 -1150 -1020 mV mV hFE 100 100 45 10 250 200 90 25 − 300 − − − Transition Frequency fT − 120 − MHz Output Capacitance Cobo ton toff − − − 48 39 370 − − − pF DC Current Gain (Note 7) Switching Times Notes: ns Test Condition IC = -100μA IC = -10mA IE = -100μA VCB = -80V VCB = -80V, Tamb = 100 °C VCB = -80V VCB = -80V, Tamb = 100 °C VEB = -6V IC = -0.1A, IB = -10mA IC = -1A, IB = -100mA IC = -2A, IB = -200mA IC = -5A, IB = -500mA IC = -5A, IB = -500mA VCE = -1V, IC = -5A VCE = -1V, IC = -10mA VCE = -1V, IC = -2A VCE = -1V, IC = -5A VCE = -1V, IC = -10A VCE = -10V, IC = -100mA, f = 50MHz VCB = -10V, f = 1MHz VCC = 10V, IC = 1A, IB1 = IB2 = -100mA 7. Pulse Test: Pulse width ≤300μs. Duty cycle ≤2.0%. PowerDI is a registered trademark of Diodes DXT2012P5 Document number: DS32070 Rev. 2 - 2 4 of 7 www.diodes.com March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT2012P5 1 0.5 Tamb=25°C IC/IB=10 0.4 - VCE(SAT) (V) - VCE(SAT) (V) IC/IB=50 100m IC/IB =20 IC/IB=10 10m 1m 10m 100m 1 100°C 0.2 25°C 0.1 -55°C 0.0 1m 10 - IC Collector Current (A) 0.3 10m 100°C 1.0 1.4 250 1.2 25°C 150 0.6 100 0.4 -55°C 50 0.2 10m 100m 1 10 10 IC/IB=10 200 0.8 0.0 1m 300 0 - VBE(SAT) (V) Normalised Gain 1.2 VCE =1V 1 VCE(SAT) v IC Typical Gain (hFE) 1.4 100m - IC Collector Current (A) VCE(SAT) v IC 1.0 -55°C 25°C 0.8 0.6 100°C 0.4 1m - IC Collector Current (A) h FE v IC 10m 100m 1 - IC Collector Current (A) 10 VBE(SAT) v IC 1.4 VCE =1V 1.2 -55°C - VBE(ON) (V) ADVANCE INFORMATION Typical Characteristic 1.0 25°C 0.8 0.6 0.4 1m 100°C 10m 100m 1 - IC Collector Current (A) 10 VBE(ON) v IC PowerDI is a registered trademark of Diodes DXT2012P5 Document number: DS32070 Rev. 2 - 2 5 of 7 www.diodes.com March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT2012P5 ADVANCE INFORMATION Package Outline Dimensions ® A D D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm Suggested Pad Layout Z C E1 X2 X1 Y2 PowerDI is a registered trademark of Diodes DXT2012P5 Document number: DS32070 Rev. 2 - 2 Y1 6 of 7 www.diodes.com Dimensions Z X1 X2 Y1 Y2 C E1 Value (in mm) 6.6 1.4 3.6 0.8 4.7 3.87 0.9 March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT2012P5 ADVANCE INFORMATION IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com PowerDI is a registered trademark of Diodes DXT2012P5 Document number: DS32070 Rev. 2 - 2 7 of 7 www.diodes.com March 2010 © Diodes Incorporated