A Product Line of Diodes Incorporated DXT790AP5 40V PNP HIGH GAIN TRANSISTOR PowerDI®5 Features Mechanical Data • • • • • • • • • • 43% smaller than SOT223; 60% smaller than TO252 Maximum height just 1.1mm Rated up to 3.2W VCEO = 40V IC = 3A; ICM = 6A Low Saturation, high gain transistor, Lead, Halogen, and Antimony Free/RoHS Compliant (Note 1) “Green” Device (Note 2) • • • ® Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.093 grams (approximate) C B Top View Ordering Information Bottom View E Pin Configuration (Note 3) Part Number DXT790AP5-13 Notes: Device Schematic Case ® PowerDI 5 Packaging 5000/Tape & Reel 1. No purposefully added lead. Halogen and Antimony Free. 2. Diodes Inc’s “Green” Policy can be found on our website at http://www.diodes.com 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information DXT790A YYWWK DXT790A = Product Type Marking Code = Manufacturers’ Code Marking K = Factory Designator YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 09 for 2009) WW = Week code (01 to 53) PowerDI is a registered trademark of Diodes Incorporated. 1 of 7 DXT790AP5 Document number: DS31800 Rev. 2 - 2 www.diodes.com March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Base Current Symbol VCBO VCEO VEBO IC ICM IB Value -50 -40 -5 -3 -6 -0.5 Unit V V V A A A Symbol PD RθJA PD RθJA PD RθJA RθJT TJ, TSTG Value 3.2 39 1.7 75 0.74 169 8.9 -55 to +150 Unit W °C/W W °C/W W °C/W °C/W °C Thermal Characteristics Characteristic Power Dissipation @ TA = 25°C (Note 4) Thermal Resistance, Junction to Ambient Air (Note 4) @TA = 25°C Power Dissipation @ TA = 25°C (Note 5) Thermal Resistance, Junction to Ambient Air (Note 5) @TA = 25°C Power Dissipation @ TA = 25°C (Note 6) Thermal Resistance, Junction to Ambient Air (Note 6) @TA = 25°C Thermal Resistance, Junction to Collector Terminal Operating and Storage Temperature Range Notes: 4. Device mounted on 1.6mm FR-4 PCB, single sided 2 oz. copper collector pad dimensions 50mm x 50mm. 5. Device mounted on 1.6mm FR-4 PCB, single sided 1 oz. copper collector pad dimensions 25mm x 25mm. 6. Device mounted on 1.6mm FR-4 PCB, single sided 1 oz. copper minimum recommended pad layout. PowerDI is a registered trademark of Diodes Incorporated. 2 of 7 DXT790AP5 Document number: DS31800 Rev. 2 - 2 www.diodes.com March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 3.5 VCE(sat) Max Power Dissipation (W) -IC Collector Current (A) 10 Limited 1 DC 1s 100m 100ms 10ms 1ms Single Pulse. T amb=25°C 100µs See note 3 10m 100m 1 10 -VCE Collector-Emitter Voltage (V) 3.0 2.5 See note 3 2.0 See note 4 1.5 See note 5 1.0 0.5 0.0 0 25 See note 3 30 D=0.5 20 D=0.2 Single Pulse 10 D=0.05 0 100µ D=0.1 1m 10m 100m 1 10 100 1k Pulse Width (s) 125 150 175 Single Pulse. Tamb=25°C See note 3 10 1 100µ 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation 4 180 T(amb)=25°C 160 T(amb)=25°C Power Rating (W) Thermal Resistance (°C/W) 100 100 Transient Thermal Impedance 140 1 oz. weight Copper 120 100 80 60 40 75 Derating Curve Max Power Dissipation (W) Thermal Resistance (°C/W) Safe Operating Area 40 50 Temperature (°C) 2 oz. weight Copper 20 10 100 1000 10000 3 2 oz. weight Copper 2 1 1 oz. weight Copper 0 10 Copper Area (sq mm) Thermal Resistance vs. Cu Area PowerDI is a registered trademark of Diodes Incorporated. 3 of 7 DXT790AP5 Document number: DS31800 Rev. 2 - 2 100 1000 10000 Copper Area (sq mm) www.diodes.com Power Rating vs. Cu Area March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 7) Emitter-Base Breakdown Voltage Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS (Note 7) Symbol Min Typ Max Unit V(BR)CBO V(BR)CEO V(BR)EBO ICBO ICES IEBO -50 -40 -5 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ -20 -20 -20 V V V nA nA nA ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ -170 -350 -450 -450 mV -1.15 -1.0 V V hFE 300 250 200 150 80 ⎯ ⎯ ⎯ ⎯ ⎯ 800 ⎯ ⎯ ⎯ ⎯ ⎯ Transition Frequency fT 100 ⎯ ⎯ MHz Output Capacitance Cobo ton toff ⎯ ⎯ ⎯ 24 35 600 ⎯ ⎯ ⎯ pF ns ns Collector-Emitter Saturation Voltage VCE(SAT) Base-Emitter Saturation Voltage Base-Emitter Turn-On Voltage VBE(SAT) VBE(ON) DC Current Gain Test Condition IC = -100μA, IE = 0 IC = -10mA, IB = 0 IE = -100μA, IC = 0 VCB = -30V, IE = 0 VCB = -30V, VBE = 0 VEB = -4V, IC = 0 IC = -0.5A, IB = -5mA IC = -1A, IB = -10mA IC = -2A, IB = -50mA IC = -3A, IB = -300mA IC = -3A, IB = -300mA VCE = -2V, IC = -3A VCE = -2V, IC = -10mA VCE = -2V, IC = -500mA VCE = -2V, IC = -1A VCE = -2V, IC = -2A VCE = -2V, IC = -3A AC CHARACTERISTICS Switching Times Notes: VCE = -5V, IC = -50mA, f = 50MHz VCB = -10V, f = 1MHz VCC = -10V, IC = -500mA, IB1 = IB2 = -50mA 7. Pulse Test: Pulse width ≤300μs. Duty cycle ≤2.0%. PowerDI is a registered trademark of Diodes Incorporated. 4 of 7 DXT790AP5 Document number: DS31800 Rev. 2 - 2 www.diodes.com March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Typical Characteristics 1 1.0 IC/IB=100 -VCE(SAT) (V) -VCE(SAT) (V) Tamb=25°C 100m IC/IB=100 10m IC/IB=40 0.8 -55°C 0.6 25°C 0.4 100°C 0.2 IC/IB=10 1m 10m 100m 1 0.0 1m 10 -IC Collector Current (A) 10m 450 25°C 360 0.6 270 0.4 180 -55°C 90 0.2 0.0 1m 10m 100m 1.0 -VBE(SAT) (V) 540 1.0 0.8 630 Typical Gain (hFE) Normalised Gain 1.2 VCE=-2V 100°C 0 10 1 -55°C 0.6 25°C 100°C 0.4 1m 10m 100m 1 10 -IC Collector Current (A) hFE v IC -VBE(ON) (V) IC/IB=100 0.8 -IC Collector Current (A) 1.0 1 VCE(SAT) v IC VCE(SAT) v IC 1.4 100m -IC Collector Current (A) VBE(SAT) v IC VCE=-2V 0.8 -55°C 0.6 25°C 0.4 0.2 1m 100°C 10m 100m 1 10 -IC Collector Current (A) VBE(ON) v IC PowerDI is a registered trademark of Diodes Incorporated. 5 of 7 DXT790AP5 Document number: DS31800 Rev. 2 - 2 www.diodes.com March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 Package Outline Dimensions A ® D D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm Suggested Pad Layout Z C E1 X2 X1 Y2 Y1 PowerDI is a registered trademark of Diodes Incorporated. 6 of 7 DXT790AP5 Document number: DS31800 Rev. 2 - 2 Dimensions Z X1 X2 Y1 Y2 C E1 www.diodes.com Value (in mm) 6.6 1.4 3.6 0.8 4.7 3.87 0.9 March 2010 © Diodes Incorporated A Product Line of Diodes Incorporated DXT790AP5 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com PowerDI is a registered trademark of Diodes Incorporated. 7 of 7 DXT790AP5 Document number: DS31800 Rev. 2 - 2 www.diodes.com March 2010 © Diodes Incorporated