Rocker Switches RK12 Series 1 2 3 7.60 LOAD CIRCUIT 7.00 Ø 19.80 Ø 23.00 18.20 3.50 2.00 RK12S Single Pole Rocker Switches Ø 23.00 15.80 2.00 Ø23 mm Round illuminated Rocker Switches 3B 4B 6.50 1A CIRCUIT 5.00 9.20 8.00 Ø 23.00 18.20 3.50 2.00 RK12D_ _ _U Double Poles illuminated 2A 3B 6.50 1A 9.20 RK12D_ _ _N Double Poles non-illuminated Q CIRCUIT 5.00 8.00 ACTUATOR SHAPE 4.8mm TAB, 0.8mm Thick PANEL CUT-OUT Snap-in mounting ON OFF B 2.40±0.10 D1 Solder Tag Type 1 D2 Solder Tag Type 2 PANEL SIZE D A E D3 Solder Tag Type 3 HI Thru Hole Straight LO H How to order: RK12 1 S D 2 1 2 3 Q D1 D2 D3 H 4 A B C D E F 1 2 21.0±0.10 General Specifications: 3 POLES: Single Pole Double Poles SWITCHING: ON - OFF ON - ON (RK12S Only) TERMINAL (See above drawings): Quick Connect Solder Tag Type 1 Solder Tag Type 2 Solder Tag Type 3 Thru Hole Straight ACTUATOR MARKING: See above drawings See above drawings See above drawings See above drawings See above drawings See above drawings [email protected] 2A Ø 20.0 + 0.10/-0 TERMINAL 4B 4 5 6 5 N T U 6 A H B 7 A H B C F D G E 7 ILLUMINATION: No Illuminated (Standard) No Illuminated with transparent Rocker Illuminated BASE COLOR: Black Grey White ACTUATOR COLOR: Black Grey White Red Green Orange Blue (RK12S Only) Yellow (RK12D Only) FEATURES » Round rocker switch » Single pole or double pole » Illuminated or non-illuminated MATERIALS of RK12S » Contact Arm (RK12S): Silver plated copper alloy » Movable Contact Arm (RK12D): Phosphorus bronze » Movable Contact (RK12D): Silver alloy » Terminals: Silver plated copper » Lamp: Neon for AC; Tungsten bulb for DC » Spring: Piano wire MECHANICAL » Temperature Range: -20°C to +125°C ELECTRICAL » Electrical Life: 10,000 cycles » Rating (RK12S): 20A125VAC, 12A250VAC 10A125VAC / 6A250VAC 6A125VAC / 3A250VAC 6A250VAC 10(4)A250VAC~T125 » Rating (RK12D): 12A125VAC, 10A250VAC 10A125VAC / 8A250VAC 10A250VAC 10(4)A250V~T125/55 » Initial Contact Resistance: 20mΩ max. » Insulation Resistance: 100MΩ min. at 500VDC www.greatecs.com B12