Illuminated Switches LED Miniature Power Rocker Switches CWSC Series 1.7 Typ P/N This Side 5.7 0.5 Typ 2.79 Typ 19.2 15.7 4.5 0.5 33° 21.1 5.5 12.9 2 1 2a 1a 18.6 12.9 2.25 Typ 1.6 Typ 4.95 2.0 10.6 CWSC11JCACS 15.1 17.7 12.9 7.1 P/N This Side 5.7 Panel Thickness 0.75mm ~ 2.0mm 12.6 3.2 Typ 1.7 Typ 0.5 Typ 2.79 Typ 19.2 15.7 4.5 0.5 33° 21.1 5.5 12.9 18.6 1.6 Typ 10.6 CWSC21JCACS 2.0 2 1 2a 1a 17.7 2.25 Typ 4.95 Typ 3.2 Typ 15.1 12.9 Panel Thickness 0.75mm ~ 2.0mm 12.6 7.1 12.9 POLES & CIRCUITS Rocker Position Pole Model SP CWSC11 Connected Terminals Throw & Switch/Lamp Schematic Down Center Up Down Center Up ON NONE OFF 1-1a OPEN OPEN Note: Terminal numbers and polarity are actually on the switch. 1 (COM) SPST (+) (-) (+) (-) 1a CWSC21 ON NONE OFF 1-1a 2-2a OPEN OPEN (COM) 2 DPST 1a HOUSING CAP CUTAWAY Rocker Cap / Diffuser A Black Housing with Snap-in Mounting Caps are factory assembled and are not available separately. On Off (I O) symbols are molded on the bezel. How to order: 1 2 2a Illuminated Switches 1 DP General Specifications: 3 4 5 6 CWSC ELECTRICAL CAPACITY (Resistive Load) » Power Level: 9A @ 125VAC or 6A @ 250VAC 4 POLES: SPST DPST 1 1 2 HOUSING: Black A 2 1 3 All specifications are restricted to QA test criteria. DRW: D.L. JIN, CHK: D.F. LEE, APP: H.Z. QIU C D F CIRCUIT: ON-NONE-OFF CAP/DIFFUSER COLORS: Clear/Red Clear/Amber ClearGreen JC JD JF OTHER RATINGS: LED COLORS: Red Amber Green 5 » Contact Resistance: 20mȍ max. » Insulation Resistance: 500Mȍ min.@500VDC » Mechanical Life: 30,000 operations min. » Electrical Life: 10,000 operations min. 6 TERMINALS: Solder Lug / Quick Connect S LED COLORS & SPECIFICATIONS: (+) Colors: (-) D Amber F Green IFM 30mA 30mA 30mA Continuous Forward Current IF 20mA 20mA 20mA Forward Voltage VF 1.95V 2.0V 2.1V Reverse Peak Voltage VRM 5V 5V 5V 0.41mA/°C 0.29mA/°C 0.39mA/°C Ambient Temperature Range [email protected] » Angle of Throw: 33° MATERIALS C Red Forward Peak Current Current Reduction Rate Above 25°C ¨IF » Nominal Operating Force: SP 4.50N, DP 10.0N -10°C ~ +50°C » Contacts: Silver alloy » Switch & Lamp Terminals: Brass with silver plating ENVIRONMENTAL DATA » Operating Temperature: -10°C through +50°C SOLDERING » Manual Soldering: 4 sec. max. @ 410°C max. www.greatecs.com J03 Illuminated Switches Neon Illuminated Miniature Power Rocker Switches 2.3 Dia Typ 5.7 CWSB Series 2.5 Typ 1.6 Dia Typ 4.0 Typ 15.8 4.75 Typ 21.1 19.2 18.6 4.0 30 17.4 12.9 5.0 2a 1a 10.6 2.65 15.1 16.2 CWSB21CACF 0.8 Typ 1.0 2.0 12.9 12.6 8.1 Panel Thickness 0.75mm ~ 2.0mm 12.9 Neon Illuminated POLES & CIRCUITS Rocker Position Pole Model DP CWSB21 Connected Terminals Throw & Switch/Lamp Schematic Down Center Up Down Center Up ON NONE OFF 1-1a 2-2a OPEN OPEN HOUSING TERMINALS Note: Terminal numbers 1a & 2a are actually on the switch. 2 2a 1 1a DPST CAP CUTAWAY 8.1 1.15R Illuminated Switches 0.8R 4.75 2.65 Thk = 0.8 A Black Housing with Snap-in Mounting On Off (I O) symbols are molded on the bezel. F Quick Connect Cap Colors Red, Amber or Green Pear shaped 2.3mm diameter terminal hole accommodates 1 solid 12-gauge wire or 2 stranded 20-gauge wires. Caps are factory assembled and are not available separately. How to order: 1 2 General Specifications: 3 4 5 6 CWSB ELECTRICAL CAPACITY (Resistive Load) » Power Level: 9A @ 125VAC 1 2 2 1 3 C D F 4 POLES: DPST A CIRCUIT: ON-NONE-OFF 5 C D F NEON LAMP COLORS: Red Amber Green HOUSING: Black OTHER RATINGS: CAP COLORS: Red Amber Green » Contact Resistance: 20mȍ max. » Insulation Resistance: 500Mȍ min.@500VDC » Mechanical Life: 30,000 operations min. » Electrical Life: 10,000 operations min. 6 F TERMINALS: Quick Connect » Nominal Operating Force: 10,0N » Angle of Throw: 30° NEON LAMP COLORS & SPECIFICATIONS: MATERIALS Neon Lamp L o a d » Contacts: Silver alloy 2 2a 1 1a Source Colors C Red D Amber F Green V 125 VAC 125VAC 125VAC » Switch & Lamp Terminals: Brass with silver plating ENVIRONMENTAL DATA Voltage Internal Series Resistance Current Endurance J04 [email protected] 33K ohms 33K ohms 68K ohms I 1.4mA 1.4mA 0.6mA Hours 15,000 15,000 8,000 » Operating Temperature: -20°C through +85°C SOLDERING » Manual Soldering: 3 sec. max. @ 350°C max. www.greatecs.com Illuminated Switches Power Rated Snap-in Dual Lamp Rocker Switches 2.5 LW31 Series 1.2 Dia Typ L1 0.68 Typ 2.0 x 2.6 Typ 4 1 L2 27.6 34 36.0 0.4 Typ 30.0 2 5 L3 9.4 Typ 3 6 L4 4.5 6.7 0.6 19.0 8.4 19.7 28.7 3.0 Actuator in UP position LW3122-F4CF Solder Lug / Without Bezel 1.2 Dia Typ 4.0 L1 0.68 Typ 2.0 x 2.6 Typ 4 1 L2 28.8 27.6 34 0.4 Typ 30.0 5 2 41.0 L3 9.4 Typ 3 6 L4 4.5 19.0 10.0 Up Pole Model DP LW3122 LW3123 LW3125 LW3128 LW3129 Center Connected Terminals Down 24.0 Up Center CUTAWAY Throw & Power/Lamp Schematics Down Illuminated Switches Rocker Position 27.1 Actuator in UP position LW3122-F3CF-A Solder Lug / With Bezel POLES & CIRCUITS 3.0 6.7 2.6 19.7 Note: Terminal numbers are not actually on the switch. Lamp circuit is isolated and requires an external power source. ON ON ON MOM ON ON ON MOM MOM MOM NONE OFF NONE OFF OFF 2 2-3 5-6 2-1 5-4 OPEN 1 (COM) 3 4 5 6 L1 L2 L3 L4 DPDT How to order: 1 General Specifications: 2 - LW31 1 2 2 2 3 5 8 9 POLE: DPDT CIRCUITS: ON-NONE-ON ON-OFF-ON ON-NONE-MOM MOM-OFF-MOM ON-OFF-MOM 3 LAMPS: E F H K L Incandescent: 6-volt 12-volt 18-volt 24-volt 28-volt N Neon: 110-volt 4 1 2 3 4 4 5 ROCKER CAPS: White w/o Filter/Covers White with Filters White with Lamp Covers Clear with Filters 5 LAMP COVER/FILTER COLORS FOR UP POSITION: 0 No Cover/Filter Lamp Cover: Red Amber Green Filter: White Red Amber Yellow Green Blue C D F B C D E F G 6 0 3 No Illuminated: No Lamp 0 [email protected] LAMP COVER/FILTER COLORS FOR DOWN POSITION: No Cover/Filter 6 - 7 C D F Lamp Cover: Red Amber Green B C D E F G Filter: White Red Amber Yellow Green Blue 7 No Code A B C D E F G H BEZEL: No Bezel Black White Red Amber Yellow Green Blue Gray ELECTRICAL CAPACITY » Resistive Load: 10A@125VAC, 6A@250VAC, or 6A@30VDC » Inductive Load: 5A@125VAC OTHER RATINGS » Contact Resistance: 10mȍ max. » Insulation Resistance: 200Mȍ min.@250VDC » Mechanical Life: 30,000 operations min. » Electrical Life: 10,000 operations min. » Norminal Operating Force: 11.77N for maintained & 17.65N for momentary » Angle of Throw: 34° MATERIALS » Movable Contacts: Silver clad copper with silver plating » Stationary Contacts: Copper with silver plating » Common Terminals: Copper with silver plating » End Terminals: Brass with silver plating » Lamp Terminals: Phosphor bronze with nickel plating ENVIRONMENTAL DATA » Operating Temperature: -20°C through +50°C INSTALLATION » Soldering: 4 sec. max. @ 410°C max. » Cap Installation Force: 19.61N www.greatecs.com J05 Illuminated Switches LW31 Series Power Rated Snap-in Dual Lamp Rocker Switches LAMP CODES & SPECIFICATIONS Incandescent & Neon Lamps for Solid & Design Caps AT602 Incandescent AT602N Neon E F H K L N Voltage V 6V AC 12V AC 18V AC 24V AC 28V AC 110V AC Current I 80mA 50mA 35mA 25mA 22mA 1.5mA .159 .215 .398 .215 .247 Mean Spherical Candle Power Endurance Hours NA 2,000 Average Ambient Temperature Range 15,000 Av. -20°C ~ +50°C Recommended Resistor for Neon: 33K ohms for 110V AC; 100K ohms for 220V AC T-1 1/2 Pilot Slide Base 0 No Lamp: Code 0 indicates that no lamp is used. ROCKER CAPS, LAMP COVER & FILTER 1 AT420B White Rocker without Filters or Lamp Covers 2 AT420B White Rocker with Filters 3 AT420B White Rocker with Lamp Covers 4 AT420J Clear Rocker with Filters Illuminated Switches AT421 AT416 AT421 Rocker Cap Material: Polycarbonate Finish: Glossy ROCKER CAPS, LAMP COVER & FILTER AT416 Lamp Cover AT421 Filter B C D E F G C Red D Amber F Green White Red Amber Yellow Green Blue Material: Silicon Rubber Material: Polycarbonate PANEL CUTOUT & OPTIONAL ACCESSORIES Panel Cutout AT206 Bezel AT107 Lamp Extractor 19.4 28.8 5.0 Dia 2.6 32.0 3.8 Dia 20.0 41.0 24.0 19.8 Effective Panel Thickness without Bezel: 1.0mm ~ 4.0mm Effective Panel Thickness with Bezel AT206: 1.0mm ~ 3.0mm J06 [email protected] Material: Polycarbonate Lamps can be changed without removing the switch from the panel. AT107 assists in removing lamps from the switch. www.greatecs.com Illuminated Switches 21 x 15 mm SP illuminated Rocker Switches 19.00 2.00 21.0 RK3 Series 12.20 14.1 15.0 17.40 + CIRCUIT 7.00 RK3S1 ON-OFF Switching RK3S2 ON-ON Switching 19.00 21.0 0.30 13.70 20.70 15.00±0.10 100K 1/4W 7.00 CIRCUIT 14.00 RK3S3 Indicator Light TERMINAL ACTUATOR 4 Curve P 4.8mm TAB, Ø1.6 ACTUATOR MARKING PANEL CUT-OUT Snap-in mounting Y D A (No Illuminated) 0.8mm THICK, PANEL SIZE (No Marking) Ø1.6mm E Ø1.4mm X (Panal thickness) 6 Flat L 2.9mm TAB, Dimension Y Dimension Z 0.75 to 1.25 mm 19.20 +0.1/-0 mm 12.90 +0.15/-0 mm 1.25 to 2 mm 19.40 +0.1/-0 mm 12.90 +0.15/-0 mm 2 to 3 mm 19.80 +0.1/-0 mm 12.90 +0.15/-0 mm 0.8mm THICK How to order: 1 2 Illuminated Switches F C HI 5 Curve (Illuminated) Q 4.8mm TAB, 0.8mm THICK, LO Ø1.4 Z ON OFF B General Specifications: 3 4 5 6 7 8 9 RK3 FEATURES 1 S 2 1 2 3 3 P Q L 4 4 5 6 5 A B C POLES: Single Pole SWITCHING: ON - OFF ON - ON Indicator Light TERMINAL (See above drawings): 4.8mm TAB, 0.8mm Thick, Ø1.6mm (RK3S3 Only) 4.8mm TAB, 0.8mm Thick, Ø1.4mm (RK3S1 & RK3S2 Only) 2.9mm TAB, 0.8mm THICK (RK3S1 & RK3S2 Only) ACTUATOR (See above drawings): Curve (No Illuminated) (RK3S1 & RK3S2 Only) Curve (Illuminated) (RK3S1 & RK3S2 Only) Flat (RK3S3 Only) D E F See above drawings See above drawings See above drawings 6 ILLUMINATION: No Illuminated Green Red Blue (RK3S3 Only) Orange N F C G D [email protected] MATERIALS Contact Arm: Silver cadmium alloy Terminal: Silver plated copper Spring: Piano wire MECHANICAL 7 A H B 8 A H B C BASE COLOR: Black Grey White ACTUATOR COLOR: Black Grey White Red Temperature Range: -20°C to +125°C ELECTRICAL Electrical Life: 10,000 cycles Rating: 20A125VAC, 12A250VAC 10A125VAC, 6A250VAC 6A125VAC, 3A250VAC 6A250VAC 9 ACTUATOR MARKING: See above drawings See above drawings See above drawings Single pole Rocker switch up to 20A 125VAC N W WATERPROOF COVER: None Cover (Standard) With Waterproof Cover 10(4)A250VAC~T125 Initial Contact Resistance: 20mmax. Insulation Resistance: 100Mmin. at 500VDC www.greatecs.com J07 Illuminated Switches 32 x 16.5 mm SP illuminated Rocker Switches RK9 Series 1 31.80 2 16.50 SPST 16.50 31.80 3 CIRCUIT 9.50 9.50 9.50 18.40 18.40 2.10 2.10 9.50 9.50 RK9S_Q64AUAC_ _ 9.50 RK9S_Q64ANAAF_ 6.30 6.30 32.9±0.1 16.50 +0 16.5 0.1 31.80 CIRCUIT CIRCUIT 9.5 +0 0.1 11.0 9.50 ACTUATOR MARKING 1 H C I D J OFF ON PANEL SIZE PANEL CUT-OUT Snap-in mounting 4 Y 13.8 13.8 ON B ON D BASE TYPE G OFF 2 5 Solder Tag 12.1 ON OFF Illuminated Switches Q 4.8mm TAB, 0.8mm Thick A OFF Q6 6.3mm TAB, 0.8mm Thick 6.30 RK9S3Q64GNACN_ 6.3 Z RK9S_Q64ANAAN_ TERMINAL 9.50 9.5 15.7 19.40 2.0 2.10 9.50 13.8 X = Panel thickness Base Type 1, 4 & 5 E ACTUATOR K HI LO F 4 Curve 3 L HI 13.4 LO How to order: 1 2 Base Type 2 Base Type 3 X Dim. Y Dim. Z Dim. Y Dim. Z Dim. Y Dim. Z 0.75 to 1.25 28.6 +0/-0.1 13.8 28.6 +0/-0.1 12.1 28.6 +0/-0.1 13.4 General Specifications: 3 4 5 6 7 8 9 RK9 10 FEATURES » Single pole Rocker switch up to 20A 125VAC » Classical outlook 1 POLES: Single Pole 2 SWITCHING: ON - OFF ON - ON (Non-illuminated Only) ON - OFF - ON (Non-illuminated Only) S 1 2 3 3 Q6 Q D 4 ACTUATOR (See above drawings): Curve Rocker 5 ACTUATOR MARKING (See above drawings): B C D E F H I J K L 4 A G 6 N U S J08 TERMINAL (See above drawings): 6.3mm TAB, 0.8mm thick 4.8mm TAB, 0.8mm thick Solder Tag ILLUMINATION: No illuminated Illuminated Soft Lighting [email protected] 7 A H B 8 A H B C F D 9 N C F 10 1 2 3 4 5 BASE COLOR: Black Grey White ACTUATOR COLOR: Black Gray White Red Green Orange VISI COLOR: No VISI Red Green BASE TYPE: See above drawings See above drawings See above drawings See above drawings See above drawings » Fitting 3 panel cutout MATERIALS » Contact: Silver alloy » Terminals: Silver plated copper » Spring: Piano wire MECHANICAL » Temperature Range: -20°C to +125°C ELECTRICAL » Electrical Life: 10,000 cycles » Rating: 20A125VAC / 16A250VAC 3/4HP 125/250VAC 6A125VL, 3/4HP250VAC 16A250VAC 16(4)A250V~T125 » Initial Contact Resistance: 20mmax. » Insulation Resistance: 100M min. at 500VDC www.greatecs.com Illuminated Switches 31.5 x 17 mm SP illuminated Rocker Switches RK10 Series 31.50 31.50 1 2 3 1 2 17.00 17.00 CIRCUIT LIGHTED T1-NEON-T3 3 1 2 CIRCUIT CIRCUIT LIGHTED T2-NEON-T3 10.50 9.50 9.50 22.30 22.30 10.50 6.35 6.35 RK10_Q60CNAA0A RK10_Q63AUAC_E 31.50 31.50 1 2 CIRCUIT 2 CIRCUIT 17.00 17.00 1 10.50 9.50 13.00 22.30 22.30 10.50 6.35 RK10_Q60AUAC_A Q6 ACTUATOR MARKING BASE MARKING PANEL SIZE PANEL CUT-OUT Snap-in mounting Y 6.3mm TAB, 0.8mm THICK (LONG) Ø3.0 A E E D WR Wire Barrier of Base I OFF ON How to order: 1 2 ON Z A T3 Ø3.0 ON Elongate Hole B OFF EH F HI C LO Ø3.0 T2 B 0.8mm THICK (SHORT) ON T1 6.3mm TAB, OFF Q7 Z R X (Panal thickness) Dimension Y Dimension Z 0.75 to 1.25 mm 28.6 +0/-0.1 mm 13.60 +0.1/-0 mm 1.25 to 2 mm 28.8 +0/-0.1 mm 13.60 +0.1/-0 mm 2 to 3 mm 29.2 +0/-0.1 mm 13.60 +0.1/-0 mm Illuminated Switches 9.5 TERMINAL 9.05 RK10_WR0ANAA0A General Specifications: 3 4 5 6 7 8 9 RK10 FEATURES » Single pole Rocker switch up to 15A 125VAC » Curve actuator 1 S1 S2 POLES & SWITCHING: Single Pole ON-OFF Single Pole ON-ON 6 TERMINAL (See above drawings): Q6 6.3mm TAB, 0.8mm THICK, LONG Q7 6.3mm TAB, 0.8mm THICK, SHORT EH Elongate Hole WR Wire A H B BASE COLOR: Black Grey White 2 3 0 2 3 4 A TERMINAL BENDING: No Bending Bend Terminals 1 & 2 Bend Terminals 1 & 3 ACTUATOR MARKING (See above drawings): B C D E F 5 ILLUMINATION: No Illuminated Illuminated [email protected] MATERIALS » Contact: Silver alloy 7 A H B C F D ACTUATOR COLOR: Black Grey White Red Green Orange » Terminals: Silver or tin plated copper » Lamp: Neon » Spring: Piano wire MECHANICAL » Temperature Range: -20°C to +85°C 8 I 0 1 2 9 N U » Illuminated or non-illuminated R NEON LAMP POSITION: None Lighted Lighted T1-NEON-T3 Lighted T2-NEON-T3 BASE MARKING (See above drawings): A E B Z ELECTRICAL » Electrical Life: 6,000 cycles » Rating: 10A250VAC 15A125VAC » Initial Contact Resistance: 20mmax. » Insulation Resistance: 100Mmin. at 500VDC www.greatecs.com J09 Illuminated Switches 32 x 25 mm illuminated Rocker Switches RK11 Series 32.00 35.90 1 2 28.90 SPST 3 CIRCUIT 10.50 10.50 18.00 11.6 2.00 19.50 10.80 11.00 RK11D1Q2CTCL_ _N 11.00 RK11D1Q1CDN_ _W 10.80 30.50 32.00 4 5 47K NEON 25.00 CIRCUIT LAMP 47K 1 CIRCUIT 2 9.55 10.5 18.00 20.00 2.00 19.0 5.40 11.00 RK11D1Q1CCAU_ _N TERMINAL ACTUATOR SHAPE ACTUATOR MARKING 1 S T1 Y T2 Z B ON OFF D1 P F C_ C D TF Curve Actuator F CN CC CF CD CG Green Len X (Panal thickness) TC Curve Actuator without Len Curve Actuator with red Len Curve Actuator with green Len Curve Actuator with orange Len Curve Actuator with blue Len Red Len HI D4 ACTUATOR TYPE Flat Actuator (Only for illuminated) LO Illuminated Switches 2 TD M Orange Len How to order: 1 2 1 S D 2 1 2 3 4 5 7 8 3 Q D1 D4 S P 4 1 2 3 POLES: Single Pole Double Poles SWITCHING: ON - OFF ON - ON ON - OFF - ON MOM - OFF MOM - ON MOM - OFF - ON MOM - OFF - MOM TERMINAL (See above drawings): Quick Connect Solder Tag Type 1 Solder Tag Type 4 Screw Tag PC Tag ACTUATOR SHAPE (See above drawings): Single Twin [email protected] Dimension Y Dimension Z 0.75 to 1.25 mm 30.0 +0.1/-0 mm 22.0 +0.1/-0 mm 1.25 to 2 mm 30.2 +0.1/-0 mm 22.0 +0.1/-0 mm 2 to 3 mm 30.5 +0.1/-0 mm 22.0 +0.1/-0 mm General Specifications: 4 5 6 7 8 9 10 FEATURES » Rocker switch up to 20A 125VAC » Illuminated or non-illuminated RK11 J10 PANEL SIZE PANEL CUT-OUT Snap-in mounting Twin Shapes: A M3 SCREW Q Single Shape: 10.50 6.90 RK11D1Q1FAN_ _N 5 F 6 A T1 7 N U L 8 A 9 A C 10 N W P ACTUATOR TYPE (See above drawings): C CC CF CD CG ACTUATOR MARKING (See above drawings): B C D F M T2 TF TC TD ILLUMINATION: No Illuminated Illuminated (Only RK11_1) Circuit Lens (Only RK11_1) BASE COLOR: Black H Grey B White ACTUATOR COLOR: Black H Grey F Green Red B White D Orange WATERPROOF COVER: None Cover (Standard) With Waterproof Cover Protection Guard MATERIALS » Contact: Silver alloy » Terminals: Silver plated copper » Lamp: Neon for AC; Tungsten bulb for DC » Spring: Piano wire MECHANICAL » Temperature Range: -20°C to +125°C ELECTRICAL » Electrical Life: 10,000 cycles at 16(4)A250VAC 50,000 cycles at 10(2)A250VAC » Rating: 16A125VAC 1/4HP 16A250VAC1/4HP 16A250VAC 20A125VAC3/4HP 16(4)A250V~T125 10(2)A250V~T125 16(8)A250V~T125 » Initial Contact Resistance: 20mmax. » Insulation Resistance: 100Mmin. at 500VDC www.greatecs.com Illuminated Switches RK12 Series Ø 23.00 15.80 2.00 Ø23 mm Round illuminated Rocker Switches 1 2 3 7.60 LOAD CIRCUIT 7.00 Ø 19.80 Ø 23.00 18.20 3.50 2.00 RK12S Single Pole 3B 4B 6.50 1A 2A CIRCUIT 5.00 9.20 8.00 Ø 23.00 18.20 3.50 2.00 RK12D_ _ _U Double Poles illuminated 3B 2A 6.50 1A 4B CIRCUIT 5.00 RK12D_ _ _N Double Poles non-illuminated Q ACTUATOR SHAPE 4.8mm TAB, 0.8mm Thick PANEL CUT-OUT Snap-in mounting D A ON OFF B 2.40±0.10 D1 Solder Tag Type 1 D2 Solder Tag Type 2 PANEL SIZE Ø 20.0 + 0.10/-0 TERMINAL 8.00 E D3 Solder Tag Type 3 HI Thru Hole Straight LO H How to order: 1 2 1 2 1 2 3 Q D1 D2 D3 H 3 POLES: Single Pole Double Poles SWITCHING: ON - OFF ON - ON (RK12S Only) TERMINAL (See above drawings): Quick Connect Solder Tag Type 1 Solder Tag Type 2 Solder Tag Type 3 Thru Hole Straight 4 A B C D E F ACTUATOR MARKING: See above drawings See above drawings See above drawings See above drawings See above drawings See above drawings [email protected] 21.0±0.10 General Specifications: 4 5 6 7 RK12 S D Illuminated Switches 9.20 5 N T U 6 A H B 7 A H B C F D G E ILLUMINATION: No Illuminated (Standard) No Illuminated with transparent Rocker Illuminated BASE COLOR: Black Grey White ACTUATOR COLOR: Black Grey White Red Green Orange Blue (RK12S Only) Yellow (RK12D Only) FEATURES » Round rocker switch » Single pole or double pole » Illuminated or non-illuminated MATERIALS of RK12S » Contact Arm (RK12S): Silver plated copper alloy » Movable Contact Arm (RK12D): Phosphorus bronze » Movable Contact (RK12D): Silver alloy » Terminals: Silver plated copper » Lamp: Neon for AC; Tungsten bulb for DC » Spring: Piano wire MECHANICAL » Temperature Range: -20°C to +125°C ELECTRICAL » Electrical Life: 10,000 cycles » Rating (RK12S): 20A125VAC, 12A250VAC 10A125VAC / 6A250VAC 6A125VAC / 3A250VAC 6A250VAC 10(4)A250VAC~T125 » Rating (RK12D): 12A125VAC, 10A250VAC 10A125VAC / 8A250VAC 10A250VAC 10(4)A250V~T125/55 » Initial Contact Resistance: 20mmax. » Insulation Resistance: 100M min. at 500VDC www.greatecs.com J11 Illuminated Switches Ultra-Thin Fully Illuminated Paddle Switches 0.25 Typ 3.0 GW Series P/N This Side 2.54 0.4 Dia Typ 7.0 28° 1 4 2 5 3 6 4 1 5 2 6 3 2.54 Typ 2.54 Typ 0.6 Dia Typ 2.6 0.25 Typ GW12LJPC 4.5 3.8 7.0 2.54 2.6 Straight PC 5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models. 7.0 P/N This Side 0.25 3 2 2.54 Typ 1 28° 4.5 2.6 5.15 2.9 3.8 3 4 5 6 2.54 6 5.08 5.08 7.5 10.22 5 4 5.08 0.5 0.25 0.6 Dia Typ 2.54 0.4 Dia Typ 2.54 Typ Right Angle PC 5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models. P/N This Side 4.5 0.25 Typ 2 2.75 3.0 0.5 Typ GW12LJHD 1 2.54 28° 7.65 4.15 1 4 2 5 3 6 4 1 5 2 6 3 2.75 0.25 0.5 Typ 0.5 Typ 5.08 2.54 GW12LJVCF Illuminated Switches POLE & CIRCUITS Model SPDT GW12 Center 0.4 Dia 2.54 5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models. Paddle Position Up Pole 0.6 Dia Typ 2.54 Typ 12.76 3.8 5.0 Vertical PC 2.54 Typ 5.08 Connected Terminals Down Up Center CUTAWAY Throw & Schematics Down Note: Terminal numbers are not actually on the switch. LED circuit is isolated and requires an external power source. SPDT ON NONE ON 2-3 OPEN 2 (COM) (4) Red (5) 2-1 1 (6) (5) (6) Green 3 Single Color How to order: 1 2 Bicolor General Specifications: 3 4 5 6 ELECTRICAL CAPACITY (Resistive Load) GW » Logic Level: 0.4VA max.@28V AC/DC max. (Applicable Range 0.1mA~0.1A@20mV~28V) 1 1 2 2 3 L 4 J 5 POLE: SPDT P H V CIRCUITS: ON-NONE-ON 6 ACTUATOR: Paddle C D F CF ACTUATOR COLOR: Clear PC TERMINALS: Straight Right Angle Vertical OTHER RATINGS: » Contact Resistance: 80mȍ max. » Insulation Resistance: 500Mȍ min.@500VDC LEDS: Red (Single Color) Amber (Single Color) Green (Single Color) Red/Green (Bicolor) » Mechanical Life: 50,000 operations min. » Electrical Life: 50,000 operations min. » Norminal Operating Force: 1.0N » Angle of Throw: 28° LED COLORS & SPECIFICATIONS Songle Color Colors C Red D Amber F Green CF Red/Green Forward Peak Current IFM 25mA 25mA 25mA 25mA/25mA Continuous Forward Current IF 20mA 20mA 20mA 20mA/20mA Forward Voltage VF 2.0V 2.1V 2.1V 2.0V/2.1V Reverse Peak Voltage VRM 4V 4V 4V 4V/4V Current Reduction Rate Above 25°C ¨IF Ambient Temperature Range J12 Bicolor [email protected] 0.33mA/°C -25°C ~ +55°C MATERIALS » Contacts: Phosphor bronze with gold plating » Terminals: Phosphor bronze with gold plating ENVIRONMENTAL DATA » Operating Temperature: -25°C through +55°C PCB PROCESSING » Soldering: Wave soldering recommended. Manual Soldering 4 sec. max. @ 390°C max. www.greatecs.com Illuminated Switches Snap-in Illuminated Rocker / Paddle Switches MLW30 Series 4.0 1.5 1.1 x 2.0 Typ 0.8 Typ L (+) 6 4.7 Typ 17.0 2 0.5 0.5 L (-) 1.2 Dia Typ 5.9 14.5 16.0 MLW3022-12PC 10.2 22.9 4.5 21.0 1 4 0.4 Typ Without Bezel Single & Double Pole 3 5 15.6 4.0 2.0 Typ 3.0 Typ 4.5 16.6 Actuator in UP position. Terminals 4, 5 & 6 are not on sigle pole models 4.0 3.0 Typ 4.5 2.0 Typ 1.1 x 2.0 Typ 0.8 Typ L (+) 6 3 4.7 Typ 4.0 2 5 15.6 1 4 0.4 Typ Standard Bezel Single & Double Pole 0.5 2.2 2.2 15.5 MLW3022-12RC-1A 25.5 17.0 5.4 L (-) 1.2 Dia Typ 10.2 5.9 16.6 22.0 20.0 Actuator in UP position. Terminals 4, 5 & 6 are not on sigle pole models 2.0 Typ 3.0 Typ 4.0 4.5 1.1 x 2.0 Typ 4.7 Typ 15.6 4.0 L (+) 6 0.8 Typ 17.0 3 2 5 26.3 1 4 L (-) 0.4 Typ Large Bezel Single & Double Pole 10.2 1.2 Dia Typ 0.5 2.5 2.5 5.9 23.8 15.5 22.0 5.4 Actuator in UP position. Terminals 4, 5 & 6 are not on sigle pole models 4.0 3.0 Typ 2.0 Typ 1.1 x 2.0 Typ 4.5 0.8 Typ L (+) 6 3 4.7 Typ 2 5 17.0 0.4 Typ Sculptured Cap Single & Double Pole 6.1 16.0 MLW3022-CSC-1A 1 2 2 3 5 8 9 0 3 16.6 22.0 Actuator in UP position. 20.0 Terminals 4, 5 & 6 are not on sigle pole models General Specifications: 2 3 4 5 MLW30 1 2 10.2 5.9 How to order: 1 L (-) 1.2 Dia Typ 0.5 2.2 25.5 1 4 Illuminated Switches MLW3022-12PC-2A 16.6 POLES: SPDT SP3T / DPDT CIRCUITS: ON-NONE-ON ON-OFF-ON ON-NONE-MOM MOM-OFF-MOM ON-OFF-MOM ON-ON-ON 00 06 12 18 24 28 N LAMPS: No Lamp 6-volt 12-volt 18-volt 24-volt 28-volt 110-volt (not suitable with green & blue) 4 CAPS & COLORS: RA RB RC RD RE RF RG Rocker: Black White Red Orange Yellow Green Blue [email protected] ELECTRICAL CAPACITY » Power Level: 5A@125VAC, 3A@250VAC, 3A@30VDC PA PB PC PD PE PF PG Paddle: Black White Red Orange Yellow Green Blue DB DC DD DF DG Design Rocker: White Red Orange Green Blue LC LE LF LED Rocker: White Red Yellow Green (Double Element LED): Red Yellow Green SB SC SE SF Sculptured Rocker: White Red Yellow Green LB LC LE LF 5 BEZELS/COLORS: 1A 1B 1C 1D 1E 1F 1G 1H Standard: Black White Red Orange Yellow Green Blue Gray 2A 2B 2C 2D 2E 2F 2G 2H Large: Black White Red Orange Yellow Green Blue Gray OTHER RATINGS: » Contact Resistance: 10mȍ max. » Insulation Resistance: 200Mȍ min.@500VDC » Mechanical Life: 30,000 operations min. » Electrical Life: 10,000 operations min. » Norminal Operating Force: 9.94N for rockers 4.41N for paddles » Angle of Throw: 24° for ON-NONE-MOM; 28° for all other circuits. MATERIALS » Movable Contacts: Silver alloy » Stationary Contacts: Silver » Common Terminal: Copper with silver plating » End Terminals: Copper with silver plating » Lamp Terminals: Phosphor bronze with nickel plating ENVIRONMENTAL DATA » Operating Temperature: -10°C through +50°C INSTALLATION » Soldering: 4 sec. max. @ 410°C max. www.greatecs.com J13 Illuminated Switches MLW30 Series Snap-in Illuminated Rocker / Paddle Switches POLES & CIRCUIT Rocker Position Throw & Power / Lamp Schematics Up Center Down Up Center Down MLW3012 MLW3013 MLW3015 MLW3018 MLW3019 ON ON ON MOM ON NONE OFF NONE OFF OFF ON ON MOM MOM MOM 2-3 OPEN 2-1 MLW3022 MLW3023 MLW3025 MLW3028 MLW3029 ON ON ON MOM ON NONE OFF NONE OFF OFF ON ON MOM MOM MOM 2-3 5-6 Pole Model SP DP Connected Terminal Notes: Terminal numbers are not actually on switch. Lamp circuit is isolated and requires an external power source. SPDT 2 (COM) L (+) (-) L L (+) (-) L 3 1 DPDT OPEN 2 2-1 5-4 1 (COM) 3 5 6 4 For 3 Throw (3-ON) External Connection SP MLW3020 ON ON The SP3T model utilizes a double pole base. ON With External Connection Without External Connection 2-6 2-3 5-6 2-4 2-3 5-4 2-1 2-1 5-4 External connection must be made during field installation. LAMP CODES & SPECIFICATIONS Incandescent & Neon Lamps for Solid & Design Caps AT602 Incandescent AT602N Neon L(+) L(-) 06 12 18 24 28 N Illuminated Switches Voltage V 6V AC 12V AC 18V AC 24V AC 28V AC 110V AC Current I 80mA 50mA 35mA 25mA 22mA 1.5mA .159 .215 .398 .215 .247 NA Mean Spherical Candle Power Endurance Hours 2,000 Average Ambient Temperature Range 15,000 Av. -10°C ~ +50°C Recommended Resistor for Neon: 33K ohms for 110V AC; 100K ohms for 220V AC T-1 1/2 Pilot Slide Base 00 No Lamp: Code 00 indicates that no lamp is used. LED COLORS & SPECIFICATIONS AT622 LED LEDs are colored in OFF state L(+) L(-) T-1 3/4 Pilot Slide Base Color C Red E Yellow F Green Forward Peak Current IFM 30mA 30mA 30mA Continuous Forward Current IF 20mA 20mA 20mA Forward Voltage VF 1.85V 4.2V 4.3V Reverse Peak Voltage VRM 5V 8V 8V Current Reduction Rate Above 25°C ¨IF 0.40mA/°C 0.32mA/°C 0.42mA/°C Ambient Temperature Range -10°C ~ +50°C TERMINALS Switch Terminals Lamp Terminals 4.0 1.1mm x 2.0mm oblong holes accommodate one solid 18-gauge wire or two solid or stranded 22-gauge wires. J14 [email protected] 2.0 2.0 1.1 Thk = 0.8 (Center terminal is 0.5mm longer.) Lamp terminals have 1.2mm diameter holes which accommodate one solid 18-gauge wire. 5.9 1.2 Dia 3.0 Thk = 0.8 www.greatecs.com Illuminated Switches MLW30 Series Snap-in Illuminated Rocker / Paddle Switches CAP TYPES & COLORS For Incandescent or Neon Lamps AT405 Rocker 16.0 12.6 10.5 13.5 PA PB PC PD PE PF PG AT438 Design Rocker AT4125 LED Rocker 15.6 4.0 DB DC DD DF DG 25.0 12.6 16.0 LB LC LE LF 11.5 15.5 16.0 13.5 10.5 Material: Translucent Polycarbonate Standard Finish: Glossy Black Rocker / Paddle not for use with lamp 10.5 Translucent Colored Filter Opaque Black Rocker Base Translucent Colored Diffuser & Opaque Black Rocker Base OPTIONAL BEZELS AT204 Standard Bezel 20.0mm Wide 2.2 16.0 25.5 Material: Polycarbonate Translucent Polycarbonate Standard Finish: Glossy CUTAWAY AT9201 Large Bezel 23.8mm Wide 2A 2B 2C 2D 2E 2F 2G 2H 16.4 20.0 SB SC SE SF 12.6 16.0 13.5 15.6 1A 1B 1C 1D 1E 1F 1G 1H AT4127 Sculptured Rocker 16.4 2.5 16.0 23.8 26.3 Illuminated Switches RA RB RC RD RE RF RG AT426 Paddle For LED Standard Finish: Glossy PANEL CUTOUTS & THICKNESSES INSTALLATION & MAINTENANCE LED (+) Marking this side Actuator (+) Marking 5.0 Dia 18.7 18.7 20.0 3.8 Dia 16.7 16.7 Without Bezel 1.0mm ~ 4.0mm With Standard Bezel AT204 1.0mm ~ 3.0mm 19.2 Sq AT107 Lamp Extractor Lamps and LEDs can be changed without removing the switch from the panel. The lamp extractor AT107 assists in removing lamps and LEDs. Note: When changing LEDs, match the positive polarity markings on both lamp base and actuator block. With Large Bezel AT9201 1.0mm ~ 3.0mm LEGENDS STA RT OP ST 1.52 Typ 9.56 1.52 Typ 12.6 8.16 3.15 Typ 11.2 0.76 Typ 4.67 Typ 14.48 Recommended Print Method: Screen Print or Pad Print Epoxy based ink is recommended. Shaded areas are printable areas. [email protected] 0.76 Typ 13.08 0.76 Typ 0.76 Typ 18.48 Typ 0.76 Typ 14.6 16.0 20.0 Rocker Design Rocker & LED Rocker Bezel www.greatecs.com J15