BC337, BC337-25, BC337-40 Amplifier Transistors NPN Silicon http://onsemi.com Features • These are Pb−Free Devices COLLECTOR 1 2 BASE MAXIMUM RATINGS Rating Symbol Value Unit Collector − Emitter Voltage VCEO 45 Vdc Collector − Base Voltage VCBO 50 Vdc Emitter − Base Voltage VEBO 5.0 Vdc Collector Current − Continuous IC 800 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 W mW/°C TJ, Tstg −55 to +150 °C Operating and Storage Junction Temperature Range THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Ambient RqJA 200 °C/W Thermal Resistance, Junction−to−Case RqJC 83.3 °C/W Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 3 EMITTER TO−92 CASE 29 STYLE 17 1 12 3 STRAIGHT LEAD BULK PACK 2 3 BENT LEAD TAPE & REEL AMMO PACK MARKING DIAGRAM BC33 7−xx AYWW G G BC337−xx = Device Code (Refer to page 4) A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2013 November, 2013 − Rev. 8 1 ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Publication Order Number: BC337/D BC337, BC337−25, BC337−40 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit Collector −Emitter Breakdown Voltage (IC = 10 mA, IB = 0) V(BR)CEO 45 − − Vdc Collector −Emitter Breakdown Voltage (IC = 100 mA, IE = 0) V(BR)CES 50 − − Vdc Emitter −Base Breakdown Voltage (IE = 10 mA, IC = 0) V(BR)EBO 5.0 − − Vdc Collector Cutoff Current (VCB = 30 V, IE = 0) ICBO − − 100 nAdc Collector Cutoff Current (VCE = 45 V, VBE = 0) ICES − − 100 nAdc Emitter Cutoff Current (VEB = 4.0 V, IC = 0) IEBO − − 100 nAdc 100 160 250 60 − − − − 630 400 630 − Characteristic OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain (IC = 100 mA, VCE = 1.0 V) BC337 BC337−25 BC337−40 (IC = 300 mA, VCE = 1.0 V) hFE − Base−Emitter On Voltage (IC = 300 mA, VCE = 1.0 V) VBE(on) − − 1.2 Vdc Collector −Emitter Saturation Voltage (IC = 500 mA, IB = 50 mA) VCE(sat) − − 0.7 Vdc Cob − 15 − pF fT − 210 − MHz SMALL−SIGNAL CHARACTERISTICS Output Capacitance (VCB = 10 V, IE = 0, f = 1.0 MHz) Current −Gain − Bandwidth Product (IC = 10 mA, VCE = 5.0 V, f = 100 MHz) r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 0.1 0.1 0.05 0.07 0.02 0.05 0.03 P(pk) SINGLE PULSE 0.01 t1 t2 SINGLE PULSE DUTY CYCLE, D = t1/t2 0.02 0.01 0.001 qJC(t) = (t) qJC qJC = 100°C/W MAX qJA(t) = r(t) qJA qJA = 375°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) − TC = P(pk) qJC(t) 0.002 0.005 0.01 0.02 0.05 0.1 0.2 0.5 t, TIME (SECONDS) 1.0 Figure 1. Thermal Response http://onsemi.com 2 2.0 5.0 10 20 50 100 BC337, BC337−25, BC337−40 1.0 s 1000 1.0 ms TJ = 135°C 100 ms hFE, DC CURRENT GAIN IC, COLLECTOR CURRENT (mA) 1000 dc TC = 25°C dc TA = 25°C 100 10 1.0 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT (APPLIES BELOW RATED VCEO) 3.0 10 30 VCE, COLLECTOR-EMITTER VOLTAGE VCE = 1 V TJ = 25°C 100 10 0.1 100 1.0 10 100 IC, COLLECTOR CURRENT (MA) Figure 3. DC Current Gain 1.0 1.0 TJ = 25°C TA = 25°C 0.8 0.6 IC = 10 mA 0.4 100 mA 300 mA 500 mA VBE(on) @ VCE = 1 V 0.6 0.4 0.2 0.2 VCE(sat) @ IC/IB = 10 0 0.01 0 0.1 1 IB, BASE CURRENT (mA) 10 100 1 Figure 4. Saturation Region 10 100 IC, COLLECTOR CURRENT (mA) 1000 Figure 5. “On” Voltages 100 +1 qVC for VCE(sat) C, CAPACITANCE (pF) θV, TEMPERATURE COEFFICIENTS (mV/°C) VBE(sat) @ IC/IB = 10 0.8 V, VOLTAGE (VOLTS) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 2. Active Region − Safe Operating Area 1000 0 -1 qVB for VBE -2 1 10 100 IC, COLLECTOR CURRENT (mA) Cib 10 Cob 1 0.1 1000 Figure 6. Temperature Coefficients 1 10 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitances http://onsemi.com 3 100 BC337, BC337−25, BC337−40 ORDERING INFORMATION Device Marking Package Shipping† BC337G 7 5000 Units / Bulk BC337RL1G 7 2000 / Tape & Reel BC337−025G 7−25 5000 Units / Bulk BC337−25RL1G 7−25 2000 / Tape & Reel TO−92 (Pb−Free) BC337−25RLRAG 7−25 2000 / Tape & Reel BC337−25ZL1G 7−25 2000 / Ammo Box BC337−040G 7−40 5000 Units / Bulk BC337−40RL1G 7−40 2000 / Tape & Reel BC337−40ZL1G 7−40 2000 / Ammo Box †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 4 BC337, BC337−25, BC337−40 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AM A B STRAIGHT LEAD BULK PACK R P L SEATING PLANE K D X X G J H V C SECTION X−X N 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- N A R BENT LEAD TAPE & REEL AMMO PACK B P T SEATING PLANE G K D X X J V 1 C N SECTION X−X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 --2.04 2.66 1.50 4.00 2.93 --3.43 --STYLE 17: PIN 1. COLLECTOR 2. BASE 3. EMITTER ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BC337/D