Plastic Film Capacitors Metallized Polyester Film Capacitor for Noise suppression of Automobile Type : ECQE Non-inductive construction using metallized polyester film with flame retardant epoxy resin ■Features • Excellent water-proof and corrosion-proof construction properties. • Guaranteed operation temperture of 130 ˚C max • Available with wide variety of terminals, including blacket and lead wire •RoHS directive compliant ■Recommended Applications • Noise suppression for automobile ■Explanation of Part Numbers 1 2 3 4 5 6 7 8 E C Q E 2 4 7 4 Product code Dielectric & construction Rated voltage Capacitance 9 10 11 12 Suffix Suffix Suffix Suffix ■Specifications Category temp. range (Including temperature-rise on unit surface) – 40 ˚C to + 130 ˚C (Except cord, connector, tube and tape) Rated voltage 250 VDC (Derating of rated voltage by 1.11 %/˚C at more than 85 ˚C) Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) 0.47 µF, 2.2 µF, 4.7 µF ±20 % (M) tan < =1.0 % (20 ˚C, 1 kHz) 250 VDC ✕ 150 % for 60 s >3000 MΩ · µF (20 ˚C, 100 VDC, 60 S) IR= ■Shape (Example) ❈Other voltage ratings, capacitance values and special dimensions are available upon request. Please consult engineering section. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.