Plastic Film Capacitors Metallized Polyester Film Capacitor for Noise suppression of Automobile Type : ECQE Non-inductive construction using metallized polyester film with flame retardant epoxy resin Features ● Excellent water-proof and corrosion-proof construction properties. operation temperture of 130 °C max ● Available with wide variety of terminals, including blacket and lead wire ● RoHS directive compliant ● Guaranteed Recommended applications ● Noise suppression for automobile Explanation of part number 1 2 3 4 5 6 7 8 E C Q E 2 4 7 4 Product code Dielectric & construction Rated voltage Capacitance 9 10 11 12 Suffix Suffix Suffix Suffix Applicable standard Category temperature range (Including temperature-rise on unit surface) −40 °C to +130 °C (Except cord, connector, tube and tape) Rated voltage 250 V.DC (Derating of rated voltage by 1.11 %/°C at more than 85 °C) Rated capacitance 0.47 μF, 2.2 μF, 4.7 μF ✽ Capacitance tolerance ±20 % (M) Dissipation factor (tan d) tan d < 1.0 % (20 °C, 1 kHz ) Withstand voltage 250 V.DC×150 % for 60 s Insulation resistance (IR) IR > 3000 MΩ ∙ μF (20 °C, 100 V.DC, 60 s) Dimensions (Example) Connector : Type 090, 090II, 187 etc. Marking Connecting diagram L±10 L=80 mm, 90 mm, 100 mm, 110 mm, 120 mm etc. Marking Connecting diagram ✽ Other voltage ratings, capacitance values and special dimensions are available upon request. Please consult engineering section. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016