MURP20020CT, MURP20040CT POWERTAP II Ultrafast Switch-mode Power Rectifiers These state−of−the−art POWERTAP II Ultrafast switch−mode power rectifiers are designed for use in switching power supplies, inverters, and as free wheeling diodes. Features • • • • • • Dual Diode Construction Low Leakage Current Low Forward Voltage 175°C Operating Junction Temperature Labor Saving POWERTAP Package Pb−Free Packages are Available* www.onsemi.com ULTRAFAST RECTIFIERS 200 AMPERES, 200−400 VOLTS 1 2 Mechanical Characteristics: • • • • • 2 Case: Epoxy, Molded with Metal Heatsink Base Weight: 80 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant Top Terminal Torque: 25 − 40 lb−in Max Base Plate Torques: See Procedure Given in the Package Outline Section 1 MARKING DIAGRAM Rating Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage MURP20020CT MURP20040CT VRRM VRWM VR Average Rectified Forward Current @ TL = 150°C − Per Device @ TL = 125°C − Per Leg IF(AV) Peak Repetitive Surge Current Per Leg (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFRM 200 A Nonrepetitive Peak Surge Current Per Leg (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 800 A Operating Junction Temperature TJ −55 to +175 °C Value Unit Storage Temperature Tstg −55 to +150 °C Symbol Max Unit RqJC 0.45 °C/W V 300 400 AYYWWG *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. January, 2015 − Rev. 7 A YY WW G UP200x0 1 = = = = = Assembly Location Year Work Week Pb−Free Package Device Code x = 2 or 4 ORDERING INFORMATION Device Package Shipping POWERTAP II 25 Units/Tray MURP20020CTG POWERTAP II (Pb−Free) 25 Units/Tray MURP20040CT POWERTAP II 25 Units/Tray MURP20040CTG POWERTAP II (Pb−Free) 25 Units/Tray MURP20020CT Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. © Semiconductor Components Industries, LLC, 2015 UP200x0 A 200 100 THERMAL CHARACTERISTICS Thermal Resistance, Junction−to−Lead POWERTAP II CASE 357C PLASTIC 3 MAXIMUM RATINGS Rating 3 Publication Order Number: MURP20020CT/D MURP20020CT, MURP20040CT ELECTRICAL CHARACTERISTICS (Per Leg) Rating Symbol Instantaneous Forward Voltage (Note 1) (iF = 100 A, TC = +25°C) (iF = 200 A, TC = 25°C) (iF = 100 A, TC = 125°C) vF Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 125°C) (Rated DC Voltage, TC = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) trr MURP20020CT MURP20040CT 1.00 1.10 0.95 1.30 1.75 1.15 1000 150 500 50 50 75 Unit V mA ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. www.onsemi.com 2 MURP20020CT, MURP20040CT PACKAGE DIMENSIONS POWERTAP II CASE 357C−03 ISSUE E −A− W 0.25 (0.010) R G M T A B M M N −B− Q H 2 PL 0.25 (0.010) F C U E −T− M T A M B M SEATING PLANE V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. TERMINAL PENETRATION: 5.97 (0.235) MAXIMUM. DIM A B C E F G H N Q R U V W INCHES MIN MAX 3.450 3.635 0.700 0.810 0.615 0.640 0.120 0.130 0.435 0.445 1.370 1.380 0.007 0.030 1/4-20UNC-2B 0.270 0.285 3.150 BSC 0.600 0.630 0.330 0.375 0.170 0.190 MILLIMETERS MIN MAX 87.63 92.33 17.78 20.57 15.63 16.26 3.05 3.30 11.05 11.30 34.80 35.05 0.18 0.76 1/4-20UNC-2B 6.86 7.23 80.01 BSC 15.24 16.00 8.39 9.52 4.32 4.82 ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MURP20020CT/D