4) 1 +9 SOT619-1 HVQFN48; Reel dry pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending, 518 or Y Ordering code (12NC) ending 518 Rev. 1 — 21 October 2013 Packing information 1. Packing method %DUFRGHODEHO 'U\DJHQW %DJ (6'SULQW 5HODWLYHKXPLGLW\ LQGLFDWRU 0RLVWXUHFDXWLRQ SULQW (6'HPERVVHG 7DSH %DUFRGHODEHO 5HHODVVHPEO\ *XDUGEDQG 3ULQWHGSODQRER[ &RYHUWDSH &DUULHUWDSH 6SDFHIRUDGGLWLRQDO ODEHO 3UHSULQWHG(6' ZDUQLQJ %DUFRGHODEHO 'U\SDFN,'VWLFNHU 3UHSULQWHG+\DWWSDWHQW 3ULQWHGSODQRER[ 4$VHDO DDD Fig 1. Dry reel pack for SMD SOT619-1 NXP Semiconductors HVQFN48; Reel dry pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending, 518 or Y Ordering code (12NC) ending 518 Table 1. Dimensions and quantities Reel dimensions d w (mm) [1] SPQ/PQ (pcs) Reels per box Outer box dimensions l w h (mm) 330 16 4000 1 339 335 43 [1] d = reel diameter; w = tape width. 2. Product orientation SLQ DDD Pin 1 is in quadrant 1. Fig 2. Product orientation in carrier tape 3. Carrier tape dimensions 4 mm W K0 A0 B0 P1 T direction of feed Fig 3. 001aao148 Carrier tape dimensions Table 2. Carrier tape dimensions In accordance with IEC 60286-3. SOT619-1_518 Packing information A0 (mm) B0 (mm) K0 (mm) T (mm) P1 (mm) W (mm) 7.3 7.3 1.1 - 12 16 All information provided in this document is subject to legal disclaimers. Rev. 1 — 21 October 2013 © NXP B.V. 2013. All rights reserved. 2 of 4 SOT619-1 NXP Semiconductors HVQFN48; Reel dry pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending, 518 or Y Ordering code (12NC) ending 518 4. Reel dimensions A Z W2 B ØC ØD detail Z 001aao149 Fig 4. Schematic view of reel Table 3. Reel dimensions In accordance with IEC 60286-3. SOT619-1_518 Packing information A [nom] (mm) W2 [max] (mm) B [min] (mm) C [min] (mm) D [min] (mm) 330 18.4 1.5 12.8 20.2 All information provided in this document is subject to legal disclaimers. Rev. 1 — 21 October 2013 © NXP B.V. 2013. All rights reserved. 3 of 4 SOT619-1 NXP Semiconductors HVQFN48; Reel dry pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending, 518 or Y Ordering code (12NC) ending 518 5. Barcode label Fixed text Country of origin i.e. "Made in....." or "Diffused in EU [+] Assembled in...... Packing unit (PQ) identification 2nd traceability lot number* 2nd (youngest) date code* 2nd Quantity* Traceability lot number Date code With linear barcode Quantity With linear barcode Type number NXP 12NC With linear barcode NXP SEMICONDUCTORS MADE IN >COUNTRY< [PRODUCT INFO] (Q) QTY Optional product information* Re-approval date code* Origin code Product Manufacturing Code MSL at the Peak Body solder temperature with tin/lead* MSL at the higher lead-free Peak Body Temperature* 2D matrix with all data (including the data identifiers) HALOGEN FREE (30P) TYPE RoHS compliant (1P) CODENO Additional info if halogen free product Additional info on RoHS (33T) PUID: B.0987654321 (30T) LOT2 (31D) REDATE (30D) DATE2 (32T) ORIG (30Q) QTY2 (31T) PMC (31P) MSL/PBT (1T) LOT MSL/PBT (9D) DATE Lead-free symbol 001aak714 Fig 5. Table 4. Box and reel information barcode Barcode dimensions Box barcode label l w (mm) Reel barcode label l w (mm) 100 75 100 75 Limited warranty and liability © NXP B.V. 2013. Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 21 October 2013 Document identifier: SOT619-1_518 All rights reserved.