PCMF1USB3X, PCMF1HDMI2X and PESD1USB3X; H600; Reel pack, SMD, 7" Q2 ...

WLCSP5
PCMF1USB3X, PCMF1HDMI2X and PESD1USB3X; H600;
Reel pack, SMD, 7"
Q2/T3 turned product orientation
Orderable part number ending ,087 or Z
Ordering code (12NC) ending 087
Rev. 4 — 24 May 2016
Packing information
1. Packing method
6KLHOGLQJ%DJ
&ORVHGE\(6'ZDUQLQJODEHO
%DUFRGHODEHO
5HHO
3ULQWHGSODQRER[
7DSH
4$6HDO
3UHSULQWHG(6'ZDUQLQJ
&LUFXODUVSURFNHWKROHVRSSRVLWHWKH
ODEHOVLGHRIUHHO
34ODEHOSHUPDQHQW
&RYHUWDSH
&DUULHUWDSH
DDD
Fig 1.
Reel pack for SMD: shielding bag closed by ESD warning label
WLCSP5
NXP Semiconductors
PCMF1USB3X, PCMF1HDMI2X and PESD1USB3X; H600;
Reel pack, SMD, 7", Q2/T3 turned product orientation
Orderable part number ending ,087 or Z
Ordering code (12NC) ending 087
Table 1.
Dimensions and quantities
Reel dimensions
d  w (mm) [1]
SPQ/PQ
(pcs) [2]
Reels
per box
Outer box dimensions
l  w  h (mm)
180  8
4500
1
187  187  18
[1]
d = reel diameter; w = tape width.
[2]
Packing quantity dependent on specific product type.
View ordering and availability details at NXP order portal, or contact your local NXP representative.
2. Product orientation
47 47
EDOO
47 47
DDD
DDD
Tape pocket quadrants
Fig 2.
Ball 1 is in quadrant Q2/T3
Product orientation in carrier tape
3. Carrier tape dimensions
4 mm
W
K0
A0
B0
P1
T
direction of feed
001aao148
Not drawn to scale.
Fig 3.
Carrier tape dimensions
Table 2.
Carrier tape dimensions
In accordance with IEC 60286-3.
A0 (mm)
B0 (mm)
K0 (mm)
T (mm)
P1 (mm)
W (mm)
1.25  0.05
0.9  0.05
0.70  0.05
0.25  0.07
4.0  0.1
8  0.1
WLCSP5_PCMF_PESD1USB3X_PCMF1HDMI2X_087
Packing information
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 24 May 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
2 of 5
WLCSP5
NXP Semiconductors
PCMF1USB3X, PCMF1HDMI2X and PESD1USB3X; H600;
Reel pack, SMD, 7", Q2/T3 turned product orientation
Orderable part number ending ,087 or Z
Ordering code (12NC) ending 087
4. Reel dimensions
A
Z
W2
B
ØC
ØD
detail Z
001aao149
Fig 4.
Schematic view of reel
Table 3.
Reel dimensions
In accordance with IEC 60286-3.
A [nom]
(mm)
W2 [max]
(mm)
B [min]
(mm)
C [min]
(mm)
D [min]
(mm)
180
14.4
1.5
12.8
20.2
WLCSP5_PCMF_PESD1USB3X_PCMF1HDMI2X_087
Packing information
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 24 May 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
3 of 5
WLCSP5
NXP Semiconductors
PCMF1USB3X, PCMF1HDMI2X and PESD1USB3X; H600;
Reel pack, SMD, 7", Q2/T3 turned product orientation
Orderable part number ending ,087 or Z
Ordering code (12NC) ending 087
5. Barcode label
Fixed text
Country of origin
i.e. "Made in....." or
"Diffused in EU [+]
Assembled in......
Packing unit (PQ) identification
2nd traceability lot number*
2nd (youngest) date code*
2nd Quantity*
Traceability lot number
Date code
With linear barcode
Quantity
With linear barcode
Type number
NXP 12NC
With linear barcode
NXP SEMICONDUCTORS
MADE IN >COUNTRY<
[PRODUCT INFO]
(Q) QTY
Optional product information*
Re-approval date code*
Origin code
Product Manufacturing Code
MSL at the Peak Body solder
temperature with tin/lead*
MSL at the higher lead-free
Peak Body Temperature*
2D matrix with all data
(including the data identifiers)
HALOGEN FREE
(30P) TYPE
RoHS compliant
(1P) CODENO
Additional info if halogen
free product
Additional info on RoHS
(33T) PUID: B.0987654321
(30T) LOT2
(31D) REDATE
(30D) DATE2 (32T) ORIG
(30Q) QTY2
(31T) PMC
(31P) MSL/PBT
(1T) LOT
MSL/PBT
(9D) DATE
Lead-free symbol
001aak714
Fig 5.
Example of typical box information barcode label
NXP -ASSEMBLED IN >COUNTRY<
(30P)TYPE
HALOGEN FREE
(1T)LOT
(Q)QTY
EU/CN RoHS compliant
(9D)DATE
(1P)CODENO
001aak715
Fig 6.
Example of typical reel information barcode label
Table 4.
Reel barcode label
l  w (mm)
100  75
36  75
WLCSP5_PCMF_PESD1USB3X_PCMF1HDMI2X_087
Packing information
Barcode label dimensions
Box barcode label
l  w (mm)
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 24 May 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
4 of 5
WLCSP5
NXP Semiconductors
PCMF1USB3X, PCMF1HDMI2X and PESD1USB3X; H600;
Reel pack, SMD, 7", Q2/T3 turned product orientation
Orderable part number ending ,087 or Z
Ordering code (12NC) ending 087
6. Revision history
Table 5.
Revision history
Document ID
Release
date
Packing
document
status
Change Supersedes
notice
WLCSP5_PCMF_PESD1USB3X_
PCMF1HDMI2X_087 v.4[1]
20160524
Packing
information
-
Modifications:
WLCSP5_PCMF_PESD1USB3X_
PCMF1HDMI2X_087 v.3[1]
Modifications:
WLCSP5_PCMF_PESD1USB3X_087 v.2
Modifications:
WLCSP5_PCMF1USB30_087 v.1.1
[1]
•
Table 1 “Dimensions and quantities”: outer box dimensions corrected
20160406
•
WLCSP5_PCMF_PESD1USB3X_
PCMF1HDMI2X_087 v.3[1]
Packing
information
-
WLCSP5_PCMF_PESD1USB3X_
087 v.2
Product name changed from PCMF1USB3X and PESD1USB3X; H600
to PCM1USB3X, PCMF1HDMI2X and PESD1USB3X; H600
20160315
Packing
information
-
WLCSP5_PCMF1USB30_087 v.1.1
•
Product name changed from PCMF1USB30 to PCMF1USB3X and
PESD1USB3X; H600.
•
Note added to Section 6 “Revision history” referring to product
orientation.
20150917
Packing
information
-
Orientation in Q2 was approved through a waiver.
Limited warranty and liability
© NXP Semiconductors N.V. 2016.
Information in this document is believed to be accurate and reliable. However, NXP
Semiconductors does not give any representations or warranties, expressed or implied, as
to the accuracy or completeness of such information and shall have no liability for the
consequences of use of such information.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 24 May 2016
Document identifier: WLCSP5_PCMF_PESD1USB3X_PCMF1HDMI2X_087
All rights reserved.
Similar pages
TSSOP16; Reel pack; SMD, 13", Turned Q4/T2 180 deg product orientation Orde ...
HLQFP100; Reel dry pack, SMD, 13" Q1/T1 standard product orientation ...
Reel 13" Q1/T1 in Drypack
HVQFN24; Reel pack; SMD, 13" Q2/T3 Turned product orientation Order ...
HVQFN32; Reel pack; SMD, 13", Turned Q2/T3 Standard product orientation Or ...
HVSON8; reel pack; SMD; 13"; standard product orientation Orderable part number ending, 118 or J Ordering code (12NC)...
Reel pack, SMD, 7" Q1/T1-Q2/T3 standard product orientation Orderable part number ending ,115 or X Ordering...
HVQFN44; reel pack; SMD; 13"; standard product orientation; Orderable part number ending, 118 or J; Orderable code...
HVQFN32; Standard product orientation 12NC ending 118
HVSON14; reel pack; SMD; 13"; Standard product orientation; Orderable part number ending, 118 or J; Orderable code...
LFPAK56D; Reel pack, SMD, 7' Q1/T1 Standard product orientation Orde ...
HVQFN48; Reel dry pack, SMD, 13" Q1/T1 standard orientation Orderable part number ending, 518 or Y Ordering...
XQFN8(U); Reel pack, reverse; SMD, 7" Q3/T4 Standard product orientation ...
VFBGA56; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orde ...
Reel pack, SMD, 7" T3 Turned 270 degree product orientation Ordering ...
LFPAK; Reel pack, SMD, 7" T1 standard product orientation Ordering code ...
DFN2020MD-6; reel pack; Standard orientation; 12NC ending 115
DFN1010B-6; Reel pack, SMD, 7" Q2/T3 Turned 90 degree product orientatio ...
X2SON6; Reel pack, SMD, 7" Q2/T3 standard product orientation Ordera ...
PCMF3USB3X, PCMF3HDMI2X and PESD3USB3X; H500 and H600; Reel pack, SMD, 7 ...
HVSON8; Reel sulfur barrier pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending ,431...
DHVQFN24; Reel sulfur barrier pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending...