Package Description Package Code Lead Finish J‐STD‐609 Category Assembly Location Atmel Corporation ‐ Package Material Declaration Datasheet 80‐Lead, 12 x 12 x 1.4 mm Body, 0.50 mm Lead Pitch, Low Profile Quad Flat Package (LQFP) R‐LQ080 GPC AEB Matte Tin (Sn) RoHS Compliant Yes e3 Green Compliant Yes ASE Kaohsiung REACH Compliant Yes Package Material Declaration Material Leadframe Sub‐Total Integrated Circuit Sub‐Total Die Attach Sub‐Total Die Pad Plating Sub‐Total Bond Wire Sub‐Total Encapsulation Sub‐Total Terminal Plating Sub‐Total Total Substance Copper (Cu) Nickel (Ni) Silicon (Si) Magnesium (Mg) CAS # 7440‐50‐8 7440‐02‐0 7440‐21‐3 7439‐95‐4 Silicon (Si) 7440‐21‐3 Silver (Ag) Epoxy Resin B Diluent B Hardener Epoxy Resin A Diluent A Organic Peroxide Dicyandiamide 7440‐22‐4 Proprietary Proprietary Proprietary 9003‐36‐5 Proprietary Proprietary 461‐58‐5 Silver (Ag) 7440‐22‐4 Copper (Cu) Palladium (Pd) 7440‐50‐8 7440‐05‐3 Silica (Amorphous) Epoxy Resin A Epoxy Resin B Phenol Resin Carbon Black 60676‐86‐0 Proprietary Proprietary Proprietary 1333‐86‐4 Tin (Sn) 7440‐31‐5 Weight (mg) 112.954 3.522 0.704 0.235 117.416 5.475 5.475 0.279 0.022 0.022 0.018 0.015 0.015 0.002 0.001 0.374 0.640 0.640 0.399 0.010 0.409 341.542 11.738 11.738 11.738 1.893 378.649 7.810 7.810 510.773 Homogeneous Material Percentage ppm 96.2 962000 3.0 30000 0.6 6000 0.2 2000 100.0 1000000 100.0 1000000 100.0 1000000 74.7 747000 5.9 59000 5.9 59000 4.9 49000 3.9 39000 3.9 39000 0.5 5000 0.3 3000 100.0 1000000 100.0 1000000 100.0 1000000 97.6 976000 2.4 24000 100.0 1000000 90.2 902000 3.1 31000 3.1 31000 3.1 31000 0.5 5000 100.0 1000000 100.0 1000000 100.0 1000000 Package Percentage ppm 22.11 221144 0.69 6896 0.14 1379 0.05 460 22.99 229880 1.07 10719 1.07 10719 0.05 547 0.00 43 0.00 43 0.00 36 0.00 29 0.00 29 0.00 4 0.00 2 0.07 732 0.13 1253 0.13 1253 0.08 781 0.00 19 0.08 800 66.87 668676 2.30 22981 2.30 22981 2.30 22981 0.37 3707 74.13 741326 1.53 15290 1.53 15290 100.00 1000000 Package Material Declaration Certificate Atmel Corporation certifies that the material content information provided above is representative and accurate as of the date of this declaration. Atmel Corporation products designated as "RoHS Compliant" or "Green" (defined below) do not exceed the threshold limits of the European Union Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Name / Title: William B. Dupey III / Quality Engineer & Chemist Date: March 23, 2016 RoHS Compliant: Atmel Corporation defines "RoHS Compliant" to mean maximum concentration value of 0.1% (1000 ppm) for Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr+6), Polybrominated Biphenyl (PBB), Polybrominated Diphenyl Ether (PBDE) , Bis(2‐ethylhexyl) Phthalate (DEHP), Butyl Benzyl Phthalate (BBP), Dibutyl Phthalate (DBP), Diisobutyl Phthalate (DIBP) and maximum concentration value of 0.01% (100 ppm) for Cadmium (Cd) in any homogeneous material. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any homogeneous material.