2N5153HR Hi-Rel PNP bipolar transistor -80 V, -5 A Datasheet - production data Features TO-39 Parameter Value VCEO -80 V IC (max.) -5 A hFE at -10 V, -150 mA > 70 Operating temperature range -65 °C to +200 °C TO-257 • Hi-Rel PNP bipolar transistor SMD.5 • Linear gain characteristics Figure 1. Internal schematic diagram • ESCC qualified • European preferred part list - EPPL • Radiation level: lot specific total dose contact marketing for specified level Description Base and Emitter are inverted for 2N5153RSRHRx and 2N5153SRHRx series AM3128V1_n The 2N5153HR is a silicon planar epitaxial PNP transistor in TO-39, TO-257 and SMD.5 packages. It is specifically designed for aerospace Hi-Rel applications and ESCC qualified according to the 5204-002 specification. In case of conflict between this datasheet and ESCC detailed specification, the latter prevails. Table 1. Device summary Order code Quality level Agency specification Package Other features EPPL - 2N5153HRx TO-39 2N5153RHRx 100 krad ESCC LDR 2N5153ESYHRx TO-257 2N5153RESYHRx 100 krad ESCC LDR ESCC Yes 5204/002 2N5153RSHRx 100 krad LDR, emitter on pin 1 2N5153SHRx Emitter on pin 1 SMD.5 2N5153RSRHRx 100 krad LDR, emitter on pin 2 2N5153SRHRx Emitter on pin 2 May 2016 This is information on a product in full production. DocID15386 Rev 8 1/16 www.st.com Contents 2N5153HR Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.1 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Radiation hardness assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5.1 TO-257 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5.2 TO-39 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5.3 SMD.5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 6 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7 Shipping details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 8 2/16 7.1 Date code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 7.2 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DocID15386 Rev 8 2N5153HR 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-257 TO-39 SMD.5 VCBO Collector-base voltage (IE = 0 A) -100 VCEO Collector-emitter voltage (IB = 0 A) -80 VEBO Emitter-base voltage (IC = 0 A) -5.5 IC PTOT Collector current TJ V -5 A Total dissipation at Tamb ≤ 25 °C 1 3.3 Total dissipation at Tcase ≤ 25 °C 10 35 TSTG Unit W Storage temperature range -65 to 200 °C Operating junction temperature range Table 3. Thermal data Value Symbol Parameter TO-39 TO-257 Unit SMD.5 RthJ-case Thermal resistance junction-case 17.5 5 RthJ-amb Thermal resistance junction-ambient 175 53 °C/W DocID15386 Rev 8 3/16 16 Electrical characteristics 2 2N5153HR Electrical characteristics Tcase = 25 °C unless otherwise specified Table 4. Electrical characteristics Symbol Parameter Test conditions -10 IC = 0 A, VEB = -4 V -1 µA IC = 0 A, VEB = -5.5 V -1 mA -50 µA Emitter cut-off current ICEO Collector cut-off current IB = 0 A, VCE = -40 V V(BR)CEO(1) Collector-emitter breakdown voltage IB = 0 A, IC = -100 mA VCE(sat) (1) Collector-emitter saturation voltage IC = -5 A VBE(sat) (1) Base-emitter saturation voltage -2.2 50 IC = -2.5 A, VCE = -5 V 70 IC = -5 A, VCE = -5 V 40 IC = -2.5 A, VCE = -5 V Tamb = -55 °C 35 3.5 Output capacitance IE = 0 A, VCB = -10 V f = 1 MHz VCC = -30 V, VBB = 4 V Vin ≈ -51 V, IC = -5 A IB1 = - IB2 = -0.5 A DocID15386 Rev 8 V V IC = -50 mA, VCE = -5 V 1. Pulsed duration = 300 µs, duty cycle ≤ 2% 4/16 -1.5 IC = -5 A, IB = -0.5 A COBO Turn-off time V -1.45 VCE = -5 V, IC = -500 mA f = 20 MHz toff -80 IC = -2.5 A, IB = -0.25 A AC forward current transfer ratio Turn-on time µA IB = -0.5 A hFE ton Unit VCB = -60 V, IE = 0 A, Tamb = 150 °C IEBO DC current gain Max. -1 ICES hFE Typ. VCB = -60 V, IE = 0 A Collector cut-off current (1) Min. 200 250 pF 0.5 µs 1.3 µs 2N5153HR 3 Electrical characteristics (curves) Electrical characteristics (curves) Figure 2. hFE @ VCE = 5 V Figure 3. VCE(sat) @ hFE = 10 AM12794v1 hFE AM12795v1 VCE(sat) (V) -55°C 25°C 125°C 100 0.1 -55°C 25°C 125°C 10 0.01 0.1 1 0.01 0.01 10 Ic (A) VBE(sat) (V) 1.15 Figure 4. VBE(sat) @ hFE = 10 AM12796v1 VBE(on) (V) 1.05 1.1 Ic (A) 1 10 Figure 5. VBEON @ VCE = 5 V AM12797v1 1 1.05 0.95 1 0.9 0.95 0.85 [V] 0.9 0.85 0.8 0.75 0.8 0.7 0.75 0.65 0.7 0.6 0.65 -55°C 25°C 125°C 0.6 0.55 0.5 0.01 0.1 0.1 Ic (A) 1 -55°C 25°C 125°C 0.55 0.5 10 0.45 0.1 DocID15386 Rev 8 1 Ic (A) 10 5/16 16 Electrical characteristics (curves) 3.1 2N5153HR Test circuit Figure 6. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 6/16 DocID15386 Rev 8 2N5153HR 4 Radiation hardness assurance Radiation hardness assurance The products guaranteed in radiation within the ESCC system fully comply with the ESCC 5204/002 and ESCC 22900 specifications. ESCC radiation assurance Each product lot is tested according to the ESCC basic specification 22900, with a minimum of 11 samples per diffusion lot and 5 samples per wafer, one sample being kept as unirradiated sample, all of them being fully compliant with the applicable ESCC generic and/or detailed specification. ST goes beyond the ESCC specification by performing the following procedure: – 11 pieces per wafer tested, 5 biased at least 80% of V(BR)CEO, 5 unbiased and 1 kept for reference – Irradiation at 0.1 rad (Si)/s – Acceptance criteria of each individual wafer if as 100 krad guaranteed if all 10 samples comply with the post radiation electrical characteristics provided in Table 5 Delivery together with the parts of the radiation verification test (RVT) report of the particular wafer used to manufacture the products. This RVT includes the value of each parameter at 30, 50, 70 and 100 krad (Si) and after 24 hour annealing at room temperature and after an additional 168 hour annealing at 100 °C. Table 5. ESCC 5204/002 post radiation electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit IE = 0 A, VCB = -60 V -1 µA IC = 0 A, VEB = -4 V -1 µA IC = 0 A, VEB = -5.5 V -1 mA -50 µA ICES Collector cut-off current IEBO Emitter cut-off current ICEO Collector cut-off current IB = 0 A, VCE = -40 V Collector-emitter breakdown voltage IB = 0 A, IC = -100 mA VCE(sat) (1) Collector-emitter saturation voltage IC = -5 A, IB = -0.5 A -1.5 VBE(sat) (1) Base-emitter saturation voltage IC = -2.5 A, IB = -0.25 A -1.45 IC = -5 A, IB = -0.5 A -2.2 V(BR)CEO (1) [hFE] (1) -80 V - Post irradiation gain calculation(2) V V IC = -50 mA, VCE = -5 V [25] IC = -2.5 A, VCE = -5 V [35] IC = -5 A, VCE = -5 V [20] [200] 1. Pulsed duration = 300 µs, duty cycle ≤ 2%. 2. The post-irradiation gain calculation of [hFE], made using hFE measurements from prior to and on completion of irradiation testing and after each annealing step if any, is as specified in MILSTD-750 method 1019. DocID15386 Rev 8 7/16 16 Package information 5 2N5153HR Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 5.1 TO-39 package information Figure 7. TO-39 package outline 0015972_8 8/16 DocID15386 Rev 8 2N5153HR Package information Table 6. TO-39 package mechanical data mm Dim. 5.2 Min. Typ. Max. A 12.70 13.50 14.30 B 0.40 0.45 0.49 C 0.58 0.74 D 6.00 6.40 E 8.15 F 9.10 G 4.93 5.08 5.23 H 0.86 0.91 0.96 I 0.77 0.80 0.86 L 42 ° 45 ° 48 ° 8.20 8.25 9.40 TO-257 package information Figure 8. TO-257 package outline 0117268 rev 6 DocID15386 Rev 8 9/16 16 Package information 2N5153HR Table 7. TO-257 package mechanical data mm Dim. Min. Typ. Max. A 4.83 4.95 5.08 A1 0.89 1.02 1.14 A2 2.91 3.05 3.18 b 0.64 b1 0.64 0.74 0.89 D 16.51 16.64 16.76 D1 10.41 10.54 10.67 1.02 D2 0.97 e 2.41 2.54 2.67 E 10.41 10.54 10.67 H 5.13 5.25 5.38 L 15.24 15.88 16.51 L1 13.39 13.51 13.64 M 2.16 2.29 2.41 N P 0.71 3.56 R 10/16 3.68 1.65 DocID15386 Rev 8 3.81 2N5153HR 5.3 Package information SMD.5 package information Figure 9. SMD.5 package outline Pin 1 indicator 7386434 rev 5 Table 8. SMD.5 package mechanical data mm Inch Dim. Min. Typ. Max. Min. Typ. Max. A 2.84 3.00 3.15 0.112 0.118 0.124 A1 0.25 0.38 0.51 0.010 0.015 0.020 b 7.13 7.26 7.39 0.281 0.286 0.291 b1 5.58 5.72 5.84 0.220 0.225 0.230 b2 2.28 2.41 2.54 0.090 0.095 0.100 b3 2.92 3.05 3.18 0.115 0.120 0.125 D 10.03 10.16 10.28 0.935 0.400 0.405 D1 0.76 E 7.39 0.296 0.301 e 0.030 7.52 7.64 1.91 DocID15386 Rev 8 0.291 0.075 11/16 16 Ordering information Table 9. Order code Order code Agency specification EPPL Quality level Other features 2N51531 - - Engineering model - 2N5153HRG 5204/002/01 Yes ESCC - Package TO-39 Lead finish Marking(1) Gold 2N51531 Gold 520400201 Solder dip 520400202 DocID15386 Rev 8 2N5153HRT 5204/002/02 Yes ESCC - 2N5153RHRG 5204/002/01R Yes ESCC 100 krad ESCC LDR Gold 520400201R 2N5153RHRT 5204/002/02R Yes ESCC 100 krad ESCC LDR Solder dip 520400202R 2N5153ESY1 - - Engineering model - Gold 2N5153ESY1 + BeO 2N5153ESYHRG 5204/002/04 Yes ESCC - Gold 520400204 + BeO Solder dip 520400205 + BeO TO-257 2N5153ESYHRT 5204/002/05 Yes ESCC - 2N5153RESYHRG 5204/002/04R Yes ESCC 100 krad ESCC LDR Gold 520400204R + BeO 2N5153RESYHRT 5204/002/05R Yes ESCC 100 krad ESCC LDR Solder dip 520400205R + BeO 2N5153S1 - - Engineering model Emitter on pin 1 2N5153S1 2N5153RSHRG 5204/002/06R Yes ESCC 100 krad LDR, emitter on pin 1 520400206R 2N5153SHRG 5204/002/06 Yes ESCC Emitter on pin 1 Packing Ordering information 12/16 6 Strip pack 520400206 SMD.5 Gold - - Engineering model Emitter on pin 2 2N5153SR1 2N5153RSRHRG 5204/002/07R Yes ESCC 100 krad LDR, emitter on pin 2 520400207R 2N5153SRHRG 5204/002/07 Yes ESCC Emitter on pin 2 520400207 1. Specific marking only. The full marking includes in addition, for the engineering models: ST logo, date code, country of origin (FR). For ESCC flight parts: ST logo, datecode, country of origin (FR), ESA logo, serial number of the part within the assembly lot. 2N5153HR 2N5153SR1 2N5153HR Ordering information Contact ST sales office for information about the specific conditions for: • Products in die form • Tape and reel packing DocID15386 Rev 8 13/16 16 Shipping details 2N5153HR 7 Shipping details 7.1 Date code Date code xyywwz is structured as per the table below: Table 10. Date code Type x EM (ESCC) 3 ESCC flight 7.2 yy Last two digits of the year ww Week digits z Lot index within the week Documentation Table 11. Documentation provided for each type of product Quality level Radiation level Engineering model Documentation Last two digits of the year Certificate of conformance ESCC flight 14/16 100 krad DocID15386 Rev 8 0.1 rad/s radiation verification test report 2N5153HR 8 Revision history Revision history Table 12. Document revision history Date Revision 10-Dec-2008 1 Initial release. 08-Jan-2010 2 Modified Table 1: Device summary. 12-Sep-2012 3 Added: Section 3: Electrical characteristics (curves). 12-Dec-2013 4 Updated Table 1: Device summary and Section 5: Package information. Added Section 4: Radiation hardness assurance, Section 6: Ordering information and Section 7: Shipping details. 28-Mar-2014 5 Updated Table 1: Device summary and Table 10: Ordering information. Minor text changes. 29-Apr-2015 6 Added Figure 6. Updated Section 5.1: TO-257 package information. 04-Apr-2016 7 Added part number 2N5153RSRHRG. Document updated accordingly. Updated Section 5.1: TO-257 package information. 8 Updated title, package silhouette, Figure 1: Internal schematic diagram and Table 1: Device summary in cover page. Updated Section 5: Package information and Section 6: Ordering information. Minor text changes. 29-Apr-2016 Changes DocID15386 Rev 8 15/16 16 2N5153HR IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 16/16 DocID15386 Rev 8