2N5153HR Hi-Rel PNP bipolar transistor 80 V - 5 A Datasheet − production data Features BVCEO 80 V IC (max) 5A HFE at 10 V - 150 mA > 70 Operating temperature range -65°C to +200°C 2 3 1 TO-257 TO-39 2 3 ■ Hi-Rel PNP bipolar transistor ■ Linear gain characteristics ■ ESCC qualified ■ European preferred part list - EPPL ■ Radiation level: lot specific total dose contact marketing for specified level 1 SMD.5 Figure 1. Internal schematic diagram Description The 2N5153HR is a silicon planar epitaxial PNP transistor in TO-39, TO-257 and SMD.5 packages. It is specifically designed for aerospace Hi-Rel applications and ESCC qualified according to the 5204-002 specification. In case of conflict between this datasheet and ESCC detailed specification, the latter prevails. Table 1. Device summary Order codes Packages Lead finish Marking Type 2N5153HR TO-39 Gold Solder Dip 520400201 520400202 ESCC Flight 2N5153SHR SMD.5 Gold 520400206 ESCC Flight 2N5153ESYHR TO-257 Gold Solder Dip 520400204 520400205 ESCC Flight Strip pack 2N5153T1 TO-39 Gold 2N5153T1 Engineering model Strip pack 2N5153S1 SMD.5 Gold 2N5153S1 Engineering model Strip pack 2N5153ESY TO-257 Gold 2N5153ESY Engineering model Strip pack September 2012 This is information on a product in full production. Doc ID 15386 Rev 3 EPPL Packaging Strip pack Yes Strip pack 1/10 www.st.com 10 Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCBO Collector-base voltage (IE = 0) -100 V VCEO Collector-emitter voltage (IB = 0) -80 V VEBO Emitter-base voltage (IC = 0) -5.5 V -5 A 1 3.3 3.3 W W W 10 35 35 W W W -65 to 200 °C 200 °C IC PTOT TSTG TJ Table 3. Symbol RthJC RthJA Table 4. Symbol RthJC 2/10 2N5153HR Collector current Total dissipation at Tamb ≤ 25 °C for 2N5153HR for 2N5153ESYHRB for Root part number 2 TC ≤ 25 °C for 2N5153HR for 2N5153ESYHRB for Root part number 2 Storage temperature Max. operating junction temperature Thermal data for through-hole packages Parameter Thermal resistance junction-case __ Thermal resistance junction-ambient __ max max TO-39 TO-257 Unit 17.5 175 5 53 °C/W °C/W Thermal data for SMD package Parameter Thermal resistance junction-case __ Doc ID 15386 Rev 3 max SMD.5 Unit 5 °C/W 2N5153HR 2 Electrical characteristics Electrical characteristics Tcase = 25 °C unless otherwise specified Table 5. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit -1 -10 µA µA ICES Collector cut-off current (IE = 0) VCB = - 60 V VCB = - 60 V IEBO Emitter cut-off current (IC = 0) VEB = - 4 V VEB = - 5.5 V -1 -1 µA mA ICEO Collector cut-off current (IB = 0) VCE = - 40 V -50 µA Collector-emitter V(BR)CEO (1) breakdown voltage (IB = 0) Tamb = 150 °C IC = - 100 mA -80 V VCE(sat) (1) Collector-emitter saturation voltage IC = - 5 A IB = - 0.5 A -1.5 V VBE(sat) (1) Base-emitter saturation voltage IC = - 2.5 A IC = - 5 A IB = - 0.25 A IB = - 0.5 A -1.45 -2.2 V V DC current gain IC = - 50 mA IC = - 2.5 A IC = - 5 A IC = - 2.5 A Tamb = - 55 °C VCE = - 5 V VCE = - 5 V VCE = - 5 V VCE = - 5 V hFE (1) hfe AC forward current transfer ratio VCE = - 5 V f = 20 MHz COBO Output capacitance IE = 0 f = 1 MHz ton Turn-on time toff Turn-off time 50 70 40 200 35 IC = - 500 mA VCB = - 10 V 3.5 250 pF VBB = - 4 V VCC = - 30 V Vin ≅ - 51 V IC = 5 A IB1 = - IB2 = - 0.5 A 0.5 µs VCC = - 30 V VBB = - 4 V Vin ≅ - 51 V IC = - 5 A IB1 = - IB2 = - 0.5 A 1.3 µs 1. Pulsed duration = 300 µs, duty cycle ≤ 1.5% Doc ID 15386 Rev 3 3/10 Electrical characteristics 2N5153HR 2.1 Electrical characteristics (curves) Figure 2. hFE @VCE = 5 V Figure 3. AM12794v1 1E3 VCEsat @ hFE = 10 AM12795v1 1 -55°C 25°C 125°C 100 0.1 -55°C 25°C 125°C 10 0.01 0.1 1 10 Ic (A) Figure 4. VBEsat @ hFE = 10 0.01 0.01 Figure 5. AM12796v1 1.2 0.1 Ic (A) 1 10 VBEON @ VCE = 5 V AM12797v1 1.1 1.15 1.05 1.1 1 1.05 0.95 1 0.9 0.95 0.85 [V] 0.9 0.85 0.8 0.75 0.8 0.7 0.75 0.65 0.7 0.6 0.65 -55°C 25°C 125°C 0.6 0.5 0.55 0.5 0.01 0.1 1 10 0.45 0.1 Ic (A) 2.2 Test circuit Figure 6. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 4/10 -55°C 25°C 125°C 0.55 Doc ID 15386 Rev 3 1 Ic (A) 10 2N5153HR 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 15386 Rev 3 5/10 Package mechanical data 2N5153HR TO-257 mechanical data DIM. mm. Min. Typ. Max. A 4.83 5.08 A1 0.89 1.14 A2 3.05 b 0.64 b1 0.64 D 16.38 16.89 D1 10.41 10.92 1.02 0.76 D2 0.89 0.97 e 2.54 E 10.41 10.67 L 12.70 19.05 L1 13.39 13.64 P 3.56 3.81 0117268D 6/10 Doc ID 15386 Rev 3 2N5153HR Package mechanical data TO-39 mechanical data mm. DIM. Typ. Min . A Max. 12.70 B 0.49 D 6.60 E 8.51 F 9.40 5.08 G H 1.02 I 0.86 L 45° I C H E F B L G D A 7012939_D Doc ID 15386 Rev 3 7/10 Package mechanical data 2N5153HR SMD.5 mechanical data Dim. mm. Min. Typ. Max. A 2.84 3.00 3.15 A1 0.25 0.38 0.51 b 7.13 7.26 7.39 b1 5.58 5.72 5.84 b2 2.28 2.41 2.54 b3 2.92 3.05 3.18 D 10.03 10.16 10.28 D1 E 0.76 7.39 7.52 7.64 1.91 e 7386434B 8/10 Doc ID 15386 Rev 3 2N5153HR 4 Revision history Revision history Table 6. Document revision history Date Revision Changes 10-Dec-2008 1 Initial release 08-Jan-2010 2 Modified Table 1 on page 1 12-Sep-2012 3 Added: Section 2.1: Electrical characteristics (curves) on page 4 Doc ID 15386 Rev 3 9/10 2N5153HR Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 15386 Rev 3