HOT FEED Information on New Products from Cole Hersee Company Door Jamb Switch with Boot O OB R S EP O L LA ET C E M EN T Can be used in a variety of momentary applications where a small switch is required. Black rubber boot covers and protects the face of the switch. SPST Normally closed: Off with plunger depressed, spring return to On. 4A at 12V DC lamp load. Two brass terminals.Number 00000. 9006 Door Jamb Switch Specifications • Operating force to move plunger: 1.5 +- 0.7 kgf (14.71N +- 6.86N) • Endurance: 100,000 cycles at 5-15 cpm with 14V, 4A load • Dust-Resistant • Operating temperature: -30˚C to +85˚C • Terminal size: 2 mm x 5 mm ALSO AVAILABLE from our range of Door Jamb Switches and Alarms N Door Jamb Switch 9001 Normally closed: Off with plunger depressed. Plated steel case, two screw terminals. Screw plate mounting. Door Jamb Switch 9075 Normally closed: Off with plunger depressed. Molded plastic body and plunger. Two female bullet terminals. Snap-in installation. Pilot Lights A full range of pilot lights to alert the driver to a ‘door ajar’ condition. Buzzer/Dual Alarm 4112-RC Audibly and visibly alerts the driver. Long-lasting LED light. Universal Buzzer 4099 Impact resistant ABS case. 12V DC. Two screw terminals with lockwashers. Dual Rate Alarm 40212 90dB solid state alarm. Connects to two sensors, and operator can readily distinguish between sound emitted at 60 or 120 cycles/min. Connects to Cole Hersee sealed beam connectors or Packard 12033871. Cole Hersee Co. 20 Old Colony Avenue, Boston, MA USA 02127-2467 • (617) 268-2100 • Fax (617) 268-9490 See our interactive product catalog at www.colehersee.com All specifications and information is subject to change without notice. © Copyright Cole Hersee Co. D•594