CER0357B 1575 MHz BPF Rev 0 – Origin Date: January 29, 2007 – Revision Date: January 29, 2007 Features • Low Loss • Excellent Rejection Description Surface mount, silver (Ag) coated ceramic filter. Weight: 1.0 grams typical Material: Filter is composed of a ceramic block coated with Ag. Filter complies with RoHS standards. Electrical Specifications Parameter Passband Iloss Passband Ripple Passband Return Loss @ Port 1 Passband Return Loss @ Port 2 Attenuation Frequency MHz Typical @ 25ºC Specification @ 25ºC Spec over -40ºC to +85ºC 1525 - 1625 1525 - 1625 1525 - 1625 1525 - 1625 1400 1800 -1.2 0.5 -13.0 -13.0 -50.0 -43.0 -1.5 1.0 -10.0 -10.0 -40.0 -40.0 -1.7 1.0 -14.0 -14.0 -40.0 -40.0 Power into any port 1 Watt max Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB •“This product is covered by one or more of the following U.S. and foreign patents including: US 4,692,726;US 4,742,562; US 4,800,348;US 4,829,274;US 5,146,193;EP 0573597;DE 0573597;FR 0573597;JP 508149/92;KR 142171;US 5,162,760;US 5,218,329;US 5,250,916;US 5,327,109;US 5,488,335;CA 2114029;FR 9306297;GB 2273393;JP 3205337;KR 115113;CN 93106228.4;US 5,512,866;EP 0706719;DE 0706719;FR 0706719;GB 0706719;CN 95190359.4;US 5,602,518;US 5,721,520;US 5,745,018;EP 0910875;DE 0910875;DK 0910875;FR 0910875;GB 0910875;IE 0910875;JP 505182/98;KR 10-323013;US 5,994,978;US 6,462,629;CN 00810420.4;US 6,559,735;US 6,650,202;US 6,834,429.Other US and foreign patents pending. •CTS Corporation 2006 reserves all copyrights in the layout, design and configuration of the patterns on this product.” Document No. 008-0256-0 Page 1 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH CER0357B 1575 MHz BPF Rev 0 – Origin Date: January 29, 2007 – Revision Date: January 29, 2007 Mechanical Drawing Dim Nominal (mm) A B C D E F G H I Electrical response 1300 1400 1500 1600 10.00 6.80 1.50 0.95 0.95 2.55 2.55 4.00 1.50 Tolerance (mm) +/- or max Max Max 0.13 0.13 0.13 0.13 0.13 Max 0.13 PCB Layout 1700 1800 1900 0 60 -20 40 -40 20 -60 0 -80 -20 -100 -40 -120 -60 Packaging and Marking DIMENSION REEL DIAMETER REEL WEIGHT REEL QUANTITY UNITS SPECIFICATION 330 mm 1.6 kg 1000 ea. Customer Feed Direction Product Marking CTS 57B YWW Document No. 008-0256-0 Wo Ao Bo Ko Po Inches/mm Inches/mm Inches/mm Inches/mm Inches/mm 0.630"/16 0.283"/7.2 0.413"/10.5 0..161"/4.1 0.472"/12.00 Page 2 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH