Model 407 Surface Mount Quartz Crystal FEATURES Standard 7.0mm x 5.0mm Ceramic Surface Mount Package Fundamental and 3rd Overtone Crystal Design Frequency Range 6 – 133MHz Frequency Tolerance, ±30ppm Standard Frequency Stability, ±50ppm Standard Operating Temperature to -40°C to +85°C Stable Frequency Over Temperature and Drive Level Tape & Reel Packaging Standard, EIA-481 RoHS/Green Compliant [6/6] APPLICATIONS Model 407 is a seam sealed ceramic packaged quartz resonator offering excellent performance for a wide variety of applications including; wireless communications, broadband access, WLAN/WiMax/WIFI, test and measurement, portable equipment and computer peripherals. ORDERING INFORMATION 407 M MODE OF OSCILLATION FREQUENCY IN MHz F = Fundamental T = 3rd Overtone M - indicates MHz and decimal point. FREQUENCY TOLERANCE @ +25°C 1 = ±10ppm X = ±15ppm LOAD CAPACITANCE 2 = ±20ppm 3 = ±30ppm R = ±10ppm Y = ±15ppm N = ±20ppm 4 = ±30ppm 8 = ±50ppm D = 18pF E = 20pF F = 24pF G = 30pF S = Series K = 8pF J = 9pF A = 10pF L = 12pF C = 16pF TEMPERATURE STABILITY/TEMPERATURE RANGE -20°C to +70°C -30°C to +85°C -40°C to +85°C 1 = ±10ppm X = ±15ppm 2 = ±20ppm 3 = ±30ppm 5 = ±50ppm 1,2 W = ±15ppm 6 = ±20ppm 7 = ±30ppm 9 = ±50ppm 1. Frequency is recorded with 3 leading digits before the ‘M’ and 4 significant digits after the ‘M’ [including zeros]. [Ex. XXXMXXXX (016M3840), XXXMXXXX (022M1184)] 2] There are frequencies that have significant digits after the 'M' that exceed the 4 digits. The remaining digits will be truncated from the CTS part number, but the factory will calibrate to the full frequency desired. Ex. P/N Frequency = Actual Frequency 13M5537 = 13.553750 MHz 14M3181= 14.318180 MHz 16M6666 = 16.666670 MHz 28M6363 = 28.636360 MHz Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. PACKAGING INFORMATION [reference] Device quantity is 1k pcs. maximun per 180mm reel. Document No. 008-0261-0 Page 1 - 2 www.ctscorp.com Rev. H Model 407 Quartz Crystal 7.0mm x 5.0mm ELECTRICAL PARAMETERS ELECTRICAL CHARACTERISTICS PARAMETER Frequency Range Operating Mode Crystal Cut Frequency Tolerance @ +25°C Frequency Stability Tolerance [Operating Temperature Range, Referenced to +25°C Reading] VALUE 35MHz to 133MHz 3rd Overtone AT-Cut ±30ppm, Standard 6MHz to 40MHz Fundamental ±30ppm, Standard -20°C to +70°C -30°C to +85°C -40°C to +85°C 6MHz - <10MHz 80 Ohms 10MHz - <14MHz 70 Ohms 15MHz - <20MHz 50 Ohms 20MHz - 40MHz 40 Ohms 35MHz - <44MHz 80 Ohms 44MHz - <50MHz 70 Ohms 50MHz - <80MHz 60 Ohms 80MHz - 133MHz 60 Ohms See Ordering Information 5.0pF Typical, 7.0pF Maximum 10µW Typ., 200µW Max. ±3ppm/yr Typical 500M Ohms @ DC 100V -40°C to +100°C Operating Temperature Ranges Equivalent Series Resistance - Fundamental Mode [Maximum] Equivalent Series Resistance - 3rd Overtone Mode [Maximum] Load Capacitance Shunt Capacitance [C0] Drive Level Aging @ +25°C Insulation Resistance Storage Temperature Range MECHANICAL SPECIFICATIONS PACKAGE DRAWING MARKING INFORMATION 1. XX.XXX – Frequency marked with 3 significant digits after the decimal. 2. C – CTS identifier. 3. ** – Manufacturing Site code. 4. YWW – Date Code, Y – Last Digit of Year, WW – Week. XX.XXX ● C**YWW NOTES 1. Complete CTS part number, frequency value and date code information must appear on reel and carton labels. 2. Terminations #2, #4 and metal lid are connected internally and may be connected to ground for EMI suppression. 3. Termination pads (e4); barrier plating is nickel Ni] with gold [Au] flash plate. 4. Reflow conditions per JEDEC J-STD-020; +260°C maximum, 10 seconds. 5. MSL = 1. SUGGESTED SOLDER PAD GEOMETRY Document No. 008-0261-0 Page 2 - 2 Rev. H