VFFT130 Frequency Translator to 180MHz 25.4x22mm SMD, CMOS Features ¾ ¾ ¾ ¾ RoHS Status CMOS Output to 180MHz Ultra Low Jitter and Phase Noise: -157 dBc/Hz @ 100KHz Low Power: <220mW typical Low Profile SMD package Applications ¾ ¾ ¾ Sonet / SDH / ATM 10 Gigabit Ethernet Forward Error Correction (FEC) Description The VFFT130 is a Frequency Translator capable of providing an output frequency up to 180 MHz. An internal synthesizer locks to the input reference clock and multiplies it up to the desired output frequency. An internal voltage regulator offers improved stability and noise performance. The output is configured as a sinewave. The VFFT130 is available in a 25.4mm x 22 mm surface mount package. Electrical Specifications Parameter Input Frequency Output Frequency Operating Temperature Range Output Supply Voltage Jitter SSB Phase Noise Symbol Condition Min Typ Max Unit Note Fref 0.008 180 MHz Fout 50 180 MHz T 0° -40° 70° +85° °C Order Code B Order Code G 4.75 3.15 CMOS 5.25 V 3.45 1.0 ps Order Code D Order Code E Signal Vcc 12KHz to 20MHz 100Hz 1KHz 10KHz 100KHz 5.00 3.30 0.3 -110 -135 -152 -158 dBc/ Hz @ 100MHz 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-435-5289 • www.valpeyfisher.com • RevC0608 1 VFFT130 Frequency Translator to 180MHz 25.4x22mm SMD, CMOS Electrical Specifications Parameter Supply Current Symbol Condition Min Icc 50 Ohm Load Typ Max Unit 62 75 mA Note 50 Ohm to Vcc-2V or Thevenin Equivalent Load @ 50% Duty Cycle Logic “1” Level Logic “0” Level 45 50 % Voh Vcc-0.96 Vcc-0.81 V Vol Vcc-1.85 Vcc-1.65 V 0.4 3.3 V p-p AC Coupled Internally Input Level 70 Lock Range Enable / Disable Function Enable / Disable Time 55 100 ppm Input HIGH (>2.5V): DISABLED Input LOW (<0.5V) or floating: ACTIVE Te/Td LVCMOS 100 ns Absolute Maximum Ratings Parameter Supply Voltage Storage Temperature Symbol Condition Min Typ Max Unit Vcc -0.5 +5.5 V Ts -55 +105° °C Note How to Order Output FREQUENCY, XXXX.XXXX MHz VFFT130 Temperature Range Code B G Specification 0°C to +70°C -40°C to +85°C Input FREQUENCY XXX.XXXX MHz Supply Voltage Code D E Specification 5V ± 5% 3.3V ± 5% 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-435-5289 • www.valpeyfisher.com • RevC0608 2 VFFT130 Frequency Translator to 180MHz 25.4x22mm SMD, CMOS Environmental and Mechanical Parameter Mechanical Shock Thermal Shock Specification Per MIL-STD-202, Method 213, Condition E Per MIL-STD-883, Method 1011, Condition A Vibration Per MIL-STD-883, Method 2007, Condition A Soldering Conditions 260°C for 10s max Leak rate less than 5x10-8 atm.cc/s of helium (crystal only) Hermetic Seal Connection Diagram Vcc C1 .01 uF Mechanical Outline Disable 3 4 R1 180 Ω Fout 5 nc Reference Clock Input 2 1 6 7 Gnd Pin # 1 2 3 4 5 6 7 nFout R2 180 Ω Connection Vref N/C Vcc Disable Fout nFout GND 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-435-5289 • www.valpeyfisher.com • RevC0608 3