VFJA130 Jitter Attenuator to 200 MHz 25.4x22mm SMD, CMOS Features ¾ ¾ ¾ ¾ ¾ RoHS Status 200 MHz Output Frequency Range Ultra Low Jitter: < 0.18 ps Meets OC-192 Jitter transfer, generation, and tolerance Low Power: <220mW typical Low Profile SMD package Applications ¾ ¾ ¾ Long Haul, Metro, Access Communications 10 Gigabit Ethernet Wireless Reference Description The VFJA130 is a Jitter Attenuator capable of providing an output frequency up to 200 MHz. An internal synthesizer locks to the input reference clock and multiplies it up to the desired output frequency. The output frequency is determined by a VCXO designed for low phase noise. The +5 volt option has an internal voltage regulator for improved stability and noise performance. The output is configured to provide CMOS logic levels. The VFJA130 is available in a 25.4mm x 22 mm surface mount package. Electrical Specifications Parameter Input Frequency Output Frequency Operating Temperature Range Supply Voltage Symbol Condition Min Typ Max Unit Note Fref 0.008 100 MHz Fout 10 200 MHz Ta 0° -40° +70° +85° °C Order code B Order code G 5.00 3.30 5.25 3.45 V Optional Standard .35 ps (rms) Vcc 4.75 3.15 Order Code D Order Code E Jitter 12KHz to 20MHz 0.18 SSB Phase Noise Фn 100Hz 1KHz 10KHz 100KHz -110 -135 -152 -158 dBc/Hz Modulation Bandwidth MBW 10 Hz @ 100MHz 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-435-5289 • www.valpeyfisher.com • RevC_0508 1 VFJA130 Jitter Attenuator to 200 MHz 25.4x22mm SMD, CMOS Electrical Specifications Parameter Symbol Supply Current Icc Output Level Logic “1” Output Level Logic “0” Condition Voh Ioh= -100uA Vol Iol= 100uA Min Vcc-0.1 Typ Max Unit 60 70 mA Vcc V 0 Lock Range 0.1 35 AC coupled internally Input Level Note V ppm .4 3.3 V p-p Absolute Maximum Ratings Parameter Supply Voltage Storage Temperature Symbol Condition Min Typ Max Unit Vcc -0.5 +5.5 V Ts -55 +105° °C Note How to Order Output Frequency xxx.xxxx MHz VFJA130 Temperature Range Code B G Specification 0°C to +70°C -40°C to +85°C Input Frequency xxx.xxxx MHz Supply Voltage Code D E Specification 5V ± 5% 3.3V ± 5% 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-435-5289 • www.valpeyfisher.com • RevC_0508 2 VFJA130 Jitter Attenuator to 200 MHz 25.4x22mm SMD, CMOS Environmental and Mechanical Parameter Mechanical Shock Thermal Shock Specification Per MIL-STD-202, Method 213, Condition E Per MIL-STD-883, Method 1011, Condition A Vibration Per MIL-STD-883, Method 2007, Condition A Soldering Conditions 260°C for 10s max Leak rate less than 5x10-8 atm.cc/s of helium (crystal only) Hermetic Seal Connection Diagram Vcc = 3.3V Mechanical Outline R1 10K Ω Fout C1 .01 uF 3 4 N/C 5 nc Fref 2 1 6 7 N/C GND Pin # 1 2 3 4 5 6 7 Connection Fref N/C Vcc Fout N/C N/C GND 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-435-5289 • www.valpeyfisher.com • RevC_0508 3