VFVX120 VCXO Low Jitter 9x14mm SMD, PECL / LVPECL RoHS Status Features ¾ ¾ ¾ 19 MHz to 200 MHz Frequency Range Ultra Low Jitter and Phase Noise Absolute Pull Range of ± 50ppm Applications ¾ ¾ ¾ Optical Networking, SONET / SDH 10 Gigabit Ethernet Broadband Access Electrical Specifications Parameter Frequency Range Frequency Stability Operating Temperature Range Output Supply Voltage Voltage Control Input Impedance KVCO APR Deviation slope Linearity Modulation BW Supply Current Symbol Condition Min F ∆F/F Typ 19 Vs. Operating Temperature B: 0°C to +70°C C: -10°C to +60°C G: -40°C to +85°C Vs. Supply Voltage Vs. Aging / Year 4.75 3.15 0 0 Vc 200 MHz ±3 ±1 Signal Vcc Unit ± 20 ± 20 ± 30 0° -10° -40° T Max 5.00 3.30 Note ppm ppm/V ppm +70° +60° °C +85° PECL / LVPECL 5.25 V 3.45 5.0 V 3.3 First Year Order Code B Order Code C Order Code G Order Code D Order Code E Vcc = 5.0V Vcc = 3.3V >50KΩ Fm < 10Khz @25°C ±35 Overall ±35 ppm/V ±50 ppm Monotonic positive -10 +10 % >10KHz Icc No Load 3dB BW 50 mA @155MHz 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.valpeyfisher.com • RevB_1006 1 VFVX120 VCXO Low Jitter 9x14mm SMD, PECL / LVPECL Electrical Specifications Parameter Symbol Min Typ Max @ 50% Duty Cycle Tr/Tf 45 50 20% to 80% 55 % 0.6 ns Voh Vcc-0.96 Vcc-0.81 V Vol Vcc-1.85 Vcc-1.65 V 2 10 ms 0.5 ps Start up time Phase Jitter 1σ 0.2 SSB Phase Noise 100Hz 1KHz 10KHz 100KHz -90 -115 -135 -145 -50 Subharmonics Enable / Disable Function Enable / Disable Time Unit Note 50 Ohm to Vcc-2V or Thevenin Equivalent Bias Required Load Rise / Fall Time Logic “1” Level Logic “0” Level Condition dBc/Hz -40 @ 155.52MHz dBc Input HIGH (>2.5V): DISABLED Input LOW (<0.5V) or floating: ACTIVE Te/Td 100 ns How to Order VFVX120 — — Temperature Range Code Specification B 0°C to 70°C C -10°C to 60°C G -40°C to 85°C FREQUENCY, MHz Code D E Input Voltage Specification 5V ±5% 3.3V ±5% 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.valpeyfisher.com • RevB_1006 2 VFVX120 VCXO Low Jitter 9x14mm SMD, PECL / LVPECL Absolute Maximum Ratings Parameter Supply Break Down Voltage Storage Temperature Control Voltage Symbol Condition Min Typ Max Unit Vcc -0.5 6.0 V Ts -55 +85 °C Vc -1 7 V Note Environmental and Mechanical Parameter Mechanical Shock Thermal Shock Specification Per MIL-STD-202, Method 213, Condition E Per MIL-STD-883, Method 1011, Condition A Vibration Per MIL-STD-883, Method 2007, Condition A Soldering Conditions 260°C for 10s max Leak rate less than 5x10-8 atm.cc/s of helium (crystal only) Hermetic Seal Pin # 1 2 3 4 5 6 Connection Vc Negative Enable Case, GND Output Comp. Output Vcc 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.valpeyfisher.com • RevB_1006 3