VFVX130 VCXO Low Jitter 9x14mm SMD, CMOS/TTL RoHS Status Features ¾ ¾ 19 MHz to 200 MHz Frequency Range Ultra Low Jitter and Phase Noise Applications ¾ ¾ ¾ Optical Networking, SONET / SDH 10 Gigabit Ethernet Broadband Access Electrical Specifications Parameter Frequency Range Frequency Stability Operating Temperature Range Output Supply Voltage Voltage Control Input Impedance KVCO Symbol Min F ∆F/F Typ 19 Vs. Operating Temperature B: 0°C to +70°C C: -10°C to +60°C G: -40°C to +85°C Vs. Supply Voltage Vs. Aging / Year ± 10 ± 12 ± 18 ±3 ±1 0° -10° -40° T Signal 4.75 3.15 0 0 Vcc Vc 5.00 3.30 Max Unit 200 MHz ± 20 ± 20 ± 30 Note ppm ppm/V ppm +70° +60° °C +85° CMOS / TTL 5.25 V 3.45 5 V 3.3 First Year Order Code B Order Code C Order Code G Order Code D Order Code E Vcc = 5.0V Vcc = 3.3V >50KΩ Fm < 10Khz 35 @25°C APR Deviation slope Linearity Modulation BW Supply Current Condition ppm/V ±35 Overall ppm Consult factory for wider APR Monotonic positive -10 +10 % >10KHz Icc No Load 3dB BW 50 mA @155MHz 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.valpeyfisher.com • RevC0209 1 VFVX130 VCXO Low Jitter 9x14mm SMD, CMOS/TTL Electrical Specifications Parameter Symbol Duty Cycle Rise / Fall Time Logic “1” Level Logic “0” Level Tr/Tf Condition Min Typ Max Unit @ 50% 45 50 55 % 20% to 80% 3.0 ns Voh 3.2 4.5 V Vol 0 V Start up time 2 10 ms 0.5 ps Phase Jitter 1σ 0.2 SSB Phase Noise 100Hz 1KHz 10KHz 100KHz -105 -130 -150 -160 -50 Subharmonics Enable / Disable Function Enable / Disable Time dBc/Hz -40 Note Vcc = 3.3V Vcc = 5.0V @ 100MHz dBc Logic High (> 2.0 V) or Floating: Output is Active Logic Low (< .5 V): Output = High Z Te/Td 100 ns How to Order — VFVX130 — Temperature Range Code Specification B 0°C to 70°C C -10°C to 60°C G -40°C to 85°C FREQUENCY, MHz Code D E Input Voltage Specification 5V ±5% 3.3V ±5% 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.valpeyfisher.com • RevC0209 2 VFVX130 VCXO Low Jitter 9x14mm SMD, CMOS/TTL Absolute Maximum Ratings Parameter Supply Break Down Voltage Storage Temperature Control Voltage Symbol Condition Min Typ Max Unit Vcc -0.5 6.0 V Ts -55 +85 °C Vc -1 7 V Note Environmental and Mechanical Parameter Mechanical Shock Thermal Shock Specification Per MIL-STD-202, Method 213, Condition E Per MIL-STD-883, Method 1011, Condition A Vibration Per MIL-STD-883, Method 2007, Condition A Soldering Conditions 260°C for 10s max Leak rate less than 5x10-8 atm.cc/s of helium (crystal only) Hermetic Seal 5V Vcc 0.1µF 82 Ohm 82 O hm 6 Vc 1 2 5 N/C O UTPUT DUT 4 En/Dis O UTPUT 3 120pF Ohm 10 12010K OhmΩ G ND Pin # 1 2 3 4 5 6 Connection Vc Negative Enable Case, GND Output N/C Vcc 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-435-6831 • FAX 508-497-6377 • www.valpeyfisher.com • RevC0209 3