ZL88601/602 Dual Channel Wideband Auto Battery Switching (ABS) VoicePort Device - ZL880 Series Product Brief Features • • - Same API interface as the VE880 Series - Lowest Bill of Materials (BOM) cost for 2 to 8 channel applications • Device OPN 1 Device Type Package ZL88601LDF1 ZL88601LDG1 ZL88602LDF1 ZL88602LDG1 1. Complete BORSCHT Functions for Two FXS Channels in a Single 64-Pin 9x9 QFN Package Battery feed, Over-voltage support, integrated Ringing, line Supervision, Codec, Hybrid (2W/4W), and Test 100V-ABS 100V-ABS 120V-ABS 120V-ABS 64-pin 64-pin 64-pin 64-pin QFN QFN QFN QFN Packing (9x9) (9x9) (9x9) (9x9) The Green package meets RoHS Directive 2002/95/EC of the European Council to minimize the environmental impact of electrical equipment. Applications DSL Residential Gateways and Integrated Access Devices (IADs) Single power supply using integrated battery switches for lowest BOM cost • Cable eMTAs • PON Single Family Units (SFUs) - Low Power Idle Mode with 60 mW consumption • - Internal FET drive circuit for lower BOM count Fiber to the Premise/Home/Building (FTTx) Multiple Dwelling Units (MDUs) - Integrated real-time power monitoring tool Integrated Power Management Description Ringing - 5 REN with pin for pin compatible 100-V (ZL88601) and 120-V (ZL88602) devices - Internally generated sinusoidal or trapezoidal ringing with programmable DC offset The Microsemi® ZL88601/602 Dual Channel Wideband Automatic Battery Switching (ABS) VoicePort Device provides complete BORSCHT functions for two telephone line FXS ports. This device is part of the new ZL880 Series featuring enhanced functionality, lower BOM cost, and greater power efficiency, while maintaining software compatibility with the industry leading VE880 Series. Worldwide Programmability - Input impedance, balance impedance, gain - DC feed voltage and current limit - Ringing frequency, voltage and current limit VBL 1 VBH TIPD1 High Vol tage Li ne Dri ver PLL PCLK/ZCLK ZSI Interface (ZSI) FS/ZSYNC DXA/ZM ISO DRA/ZM OSI ZSI RINGD1 • - G.711 µ-law, A-law, or 16 bit linear coding - Call progress tone and Caller ID generation - Sample coefficients for more than 70 countries Pin-Selectable PCM/MPI or ZSI Interfaces - • • Tape & Reel Tray Tape & Reel Tray • - • June 2012 Ordering Information Next Generation ZL880 VoicePort Family with Enhanced Features and Performance - • 142176 Voice Si gnal Processi ng LFC1 RSN1 IHL1 Signal ing Control TDC1 RDC1 Supervi sion Processi ng VS 1 VS 2 Voltage Sense Signal Generation SPI Mode 0 and 3 support and no inter byte CS off time. Also supports legacy MPI Interface. ZSI Mode for a smaller number of interface signals to the host and less expensive isolation VoicePath SDK and VP-API-II Software Available to Implement FXS Functions RDC2 TDC2 Supervi sion Processi ng IHL2 RSN2 LFC2 Signal ing Control RT V2 RAC2 T AC2 Voice Si gnal Processi ng RINGD2 High Vol tage Li ne Dri ver TIPD2 VeriVoice Software Suites Available for Manufacturing and Subscriber Loop Testing - T AC1 RAC1 RT V1 VBL 2 Utilizes integrated test tool box PCM Interface and T im e Sl ot Assi gner (PCM ) T SCA 4 Input / Output I/O11,2 - I/O2 1,2 Seri al Peripheral Interface (SPI) Switching Regul ator Control lers Anal og Reference VBH GND VREF IREF Power Suppl ies VDDSW VDD1V2 VoicePort Device Block Diagram 1 Zarlink Semiconductor, Inc. was acquired by Microsemi Corporation in October 2011. DCLK DIN DOUT CS INT RST SWCM PY SWVSY SWISY SWOUT Y SWCM PZ SWVSZ SWISZ SWOUT Z AVDD DVDD VDDHPI ZL88601/602 Product Brief Selected Electrical Specifications Description Symbol Test Condition Min. Typ. Max. Unit +85 °C Ambient Temperature, under Bias TA -40°C Digital and Analog Supply Voltages DVDD,AVDD 3.135 3.3 3.465 VDC Host Port Interface Supply Voltage VDDHPI 1.71 3.3 DVDD VDC -15 -81 -100 -15 -105 -120 18 25 45 High Battery Voltage For the ZL88601 VBH For the ZL88602 ILA Line Current VDC mA Ringing Voltage For the ZL88601 VRING 57 ABS Flyback, 5 REN For the ZL88602 67 RL Two-Wire Return Loss VRMS 200 to 3400 Hz 30 dB Longitudinal Balance 1 kHz 58 dB Device Power Consumption (Per Channel) VBH = -81 VDC ,VBL = -27 VDC Disconnect Switcher on, no DC feed to line 31 Switcher on, limited feed to line 60 Normal feed to line 128 Talk (Off-Hook) 300 ILA = -25 mA, VBL feed 650 Ringing 50 VRMS into 3 REN 625 TA = 85°C 2.1 W 26 °C/W Low Power Idle (On-Hook) PD Idle (On-Hook) Maximum Device Power Dissipation Capability, Continuous PD(max) Junction to Ambient Thermal Resistance JA mW Note: Refer to the ZL88601/602 Data Sheet for test circuits and additional details VBL2 RSVD RSVD TIPD2 RSVD RINGD2 RSVD VBH Package Drawings RSVD RSVD RINGD1 RSVD VBL1 TIPD1 RSVD RSVD Device Pinout 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 RSN1 1 48 RSN2 AVDD 2 47 AVDD RTV1 3 46 RTV2 VREF 4 45 IREF IHL1 5 44 IHL2 TAC1 6 43 TAC2 RAC1 7 42 RAC2 TDC1 8 41 TDC2 Exposed Ground Pad RDC1 9 40 RDC2 LFC1 10 39 LFC2 SWVSY 11 38 SWVSZ SWCMPY 12 37 SWCMPZ SWISY 13 36 SWISZ I/O21 / VS1 14 35 I/O22 / VS2 I/O11 15 34 I/O12 CS DOUT DIN RST DCLK INT VDDHPI VDD1V2 PCLK/ZCLK DRA/ZMOSI TSCA DXA/ZMISO FS/ZSYNC SWOUTZ DVDD VDDSW 16 33 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 SWOUTY ZSI Related Collateral • ZL88601/602 Dual Channel Wideband Auto Battery Switching (ABS) VoicePort Device - ZL880 Series Data Sheet, Document ID# 141956 • ZL880 VP-API-II Reference Guide, Document ID#: 143271 2 © Copyright 2012 Microsemi Corporation. All rights reserved