® Electrocomponents Series 226C Data Sheet Tactile Switch 3.0x2.6mm Compact Tactile Switch Features Optimized Mechanical Features • Surface mount J bend terminal configurations • Compatible with IR reflow and manual soldering • Variety of operating force options Optimized Contact System • Excellent tactile feedback Materials • Silver coated terminals for better solderability • High temperature materials (UL94V-0) • RoHS compliant Electrical and Mechanical Specifications Switch Contact Resistance 500 milliohms maximum Storage Temperature - 40°C to +85°C Insulation Resistance 100 Megohms minimum between insulated terminals Actuator Strength 3 Kgf. maximum Maximum Rating 50 mA -12 VDC Actuation Life 100 gf: 100,000 cycles 160 gf: 300,000 cycles 240 gf: 200,000 cycles Dielectric Strength 250 VAC for 1 minute between adjacent terminals Operating Force 100,160 or 240 gf Travel 0.15 mm Allowable Solder Time IR Reflow: Up to 5 seconds at 260°C Manual soldering: Up to 3 seconds at 350°C Packaging Standard: Tape and reel packaging with 330mm diameter reel and 12mm wide plastic tape Operating Temperature - 40°C to +85°C 1-3 CTS Electrocomponents © 2015 CTS Corporation. All rights reserved. Information subject to change. 9/22/15 www.ctscorp.com CTS SERIES 226CJVAAR - Surface Mount J Bend Terminal, 100gf 3.6 ±0.1 2 2.6 1.8 ±0.1 2-1.8 1.0 4-0.5 2.1 ±0.1 1 2 3 4 1.0 ±0.1 4 3 2.6 ±0.1 1 3.0 3.4 0.35 0.6 “L” area 0.45 Do not place circuit in this PCB MOUNTING SURFACE PCB LAYOUT 3.4 CIRCUIT DIAGRAM 1 2 3 4 DIMENSION : mm STANDARD TOLERANCE : .X (1 PLACE) : ±0.2 2.2 CTS SERIES 226CJVABR - Surface Mount J Bend Terminal, 160gf 2 1 3.6 ±0.1 2.6 1.8 ±0.1 1 2 3 4 1.0 ±0.1 4 3.0 3.4 2.6 ±0.1 3 2-1.8 1.0 4-0.5 2.1±0.1 0.35 0.6 “L” area 0.45 Do not place circuit in this PCB MOUNTING SURFACE PCB LAYOUT 3.4 CIRCUIT DIAGRAM 1 2 3 4 DIMENSION : mm STANDARD TOLERANCE : .X (1 PLACE) : ±0.2 2.2 2 -3 CTS Electrocomponents © 2015 CTS Corporation. All rights reserved. Information subject to change. 9/22/15 www.ctscorp.com CTS SERIES 226CJVBCR - Surface Mount J Bend Terminal, 240gf 3.6 ±0.1 2 1 1 2 3 4 1.0 ±0.1 4 3 3.0 3.4 2.6 ±0.1 2.6 1.8 ±0.1 2-1.8 1.0 4-0.5 2.1 ±0.1 0.35 0.6 “L” area 0.45 Do not place circuit in this PCB MOUNTING SURFACE PCB LAYOUT 3.4 CIRCUIT DIAGRAM 1 2 3 4 DIMENSION : mm STANDARD TOLERANCE : .X (1 PLACE) : ±0.2 2.2 Ordering Information 226C – Termination J : SURFACE MOUNT J BEND Actuating Direction V: VERTICAL J V A A R Actuator Force A: 100 gf B: 160 gf C: 240 gf Packaging R : TAPE & REEL PACKAGING Actuator Length “L” A: 0.65 mm (FOR 100 gf, 160 gf OPTION) B: 0.70 mm (FOR 240 gf OPTION) !!!Note: Consult CTS for other common features not listed. 3 -3 CTS Electrocomponents © 2015 CTS Corporation. All rights reserved. Information subject to change. 9/22/15 www.ctscorp.com