Data Sheet

®
Electrocomponents
Series 226G Data Sheet
Tactile Switch
3.7x3.7mm Compact
Tactile Switch
Features
Optimized Mechanical Features
• Surface mount J bend terminal configurations
• Compatible with IR reflow and manual soldering
• Variety of operating force options
Optimized Contact System
• Excellent tactile feedback
Materials
• Silver coated terminals for better solderability
• High temperature materials (UL94V-0)
• RoHS compliant
Electrical and Mechanical Specifications
Switch Contact Resistance
100 milliohms maximum
Storage Temperature
- 40°C to +85°C
Insulation Resistance
100 Megohms minimum between
insulated terminals
Actuator Strength
3 Kgf. maximum
Maximum Rating
50 mA -12 VDC
Actuation Life
160 gf: 500,000 cycles
235 gf: 50,000 cycles
Dielectric Strength
250 VAC for 1 minute between adjacent
terminals
Operating Force
160 or 235 gf
Travel
0.15 mm
Allowable Solder Time
IR Reflow: Up to 5 seconds at 260°C
Manual soldering: Up to 3 seconds at 350°C
Packaging
Standard: Tape and reel packaging with
330mm diameter reel and 12mm wide plastic tape
Operating Temperature
- 40°C to +85°C
1-2
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
9/29/15
www.ctscorp.com
CTS SERIES 226GJ... - Surface Mount J Bend Terminal
±0.2
3.7
90
°
2
2.75
0.4
3
2
0.8
SR0.8
4
SHAPE OF KEYING TIP
3.7
1
3°
2.2
3.07
4
1
RESTRICTION IN OPERATION
3
1
3
2
4
MYLAR
0.2
1
3.7 ±0.1
CIRCUIT DIAGRAM
2.1±0.1
3.4 ±0.1
1.7 ±0.1
“L”
2.1 ±0.1
2.5 ±0.1
3
PCB MOUNTING SURFACE
3.7 ±0.1
Do not place circuit in this
2
area
PCB LAYOUT
4
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.2
Ordering Information
226G –
Termination
J: SURFACE MOUNT J BEND
Actuating Direction
V: VERTICAL
J V
A
A
R
Actuator Force
A: 160 gf
B: 235 gf
Packaging
R : TAPE & REEL PACKAGING
Actuator Height “L”
A: 0.35 mm
!!!Note:
Consult CTS for other common features not
listed.
2 -2
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
9/29/15
www.ctscorp.com