Light Touch Switches/EVQP0/P1/9P 6 mm Square Long Travel SMD Light Touch Switches Type: EVQP0/EVQP1/EVQ9P ■ Features ● External dimensions : 6.0 mm҂6.1 mm, Height 5.0 mm (Including the push plate) ● Steady and low contact resistance (100 mΩ max.) ● Excellent solderability (J-bent-type terminals) ■ Recommended Applications ● Car electronics equipment ■ Explanation of Part Numbers 1 2 3 E V Q 4th, 5th, 6th P1K P1Y P19 P1F P1D P04 9P1 Operating Force Travel 2.2 N 1.0 mm 2.5 N 1.6 N 2.0 N 2.5 N 1.3 mm 3.0 N 3.5 N 4 5 7th & 8th 05 6 7 8 9 0 5 M Height from Bottom to Knob Top 5.0 mm 9th M Push Plate Color Natural ■ Specifications Type Snap action/Push-on type SPST Rating 10 µA 2 Vdc to 50 mA 12 Vdc (Resistive load) Contact Resistance Electrical Insulation Resistance Dielectric Withstanding Voltage Bouncing Operating Force Mechanical Travel Endurance Operating Life Operating Temperature Storage Temperature Minimum Quantity/Packing Unit Quantity/Carton 100 m액 max. 100 M액 min. (at 100 Vdc) 250 Vac for 1 minute 10 ms max. (ON, OFF) 1.6 N±0.5 N, 2.0 N±0.6 N 2.5 N±0.6 N 3.0 N±0.8 N 3.5 N±1.0 N 2.2 N±0.6 N 2.5 N±0.6 N 1.3 mm±0.2 mm 1.0 mm±0.2 mm 3.5 N type: 30000 cycles min. 1.6 N, 2.0 N, 2.2 N, 2.5 N, 3.0 N types: 100000 cycles min. –40 °C to +85 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) 2000 pcs. Embossed Taping (Reel Pack) 10000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012 Light Touch Switches/EVQP0/P1/9P ■ Dimensions in mm (not to scale) EVQP0 EVQP1 EVQ9P (Embossed Taping) 1.0±0.3 4.5±0.1 B' φ4.6 6.1±0.1 0 7.4 -0.6 .2 R0 A' A 6.0 3.5 B H 0.75 A' B' A B Circuit diagram 4.5±0.1 1.0 3.6 10.0 (4.0) 1.0 PWB land pattern for reference Part Numbers Operating Force Travel H=Height Push Plate Color Operating Life EVQP1K05M 2.2 N 1.0 mm 5.0 mm Natural 100000 cycles EVQP1Y05M 2.5 N 1.0 mm 5.0 mm Natural 100000 cycles EVQP1905M 1.6 N 1.3 mm 5.0 mm Natural 100000 cycles EVQP1F05M 2.0 N 1.3 mm 5.0 mm Natural 100000 cycles EVQP1D05M 2.5 N 1.3 mm 5.0 mm Natural 100000 cycles EVQP0405M 3.0 N 1.3 mm 5.0 mm Natural 100000 cycles EVQ9P105M 3.5 N 1.3 mm 5.0 mm Natural 30000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012 Light Touch Switches/EVQP0/P1/9P ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. 230 180 Tape width=12.0 mm t1 Feeding hole Chip pocket P2 P0 φD0 E 150 F W A B Operation Top (°C) MAX. 260 t2 (Normal Temp.) 90±30 P1 Chip component Tape running direction 40±10 Soldering Time (s) Unit: mm Part No. Height A B W F E P1 P2 P0 D0 Dia. EVQP0 EVQP1 EVQ9P 5.0 6.4±0.2 7.9±0.2 12.0±0.3 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5–0 Item A +0.1 t1 t2 0.4±0.1 5.25±0.20 ● Standard Reel Dimensions in mm (not to scale) T E B C Rate (mm) φ370.0±2.0 φ50.0 min. φ13.0±0.5 C B Item W Rate (mm) 14.0±1.5 D E φ21.0±1.0 2.0±0.5 T t r — 1.0 to 3.0 1.0±0.5 D r A W t Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012