Light Touch Switches/EVPAF 3.0 mm쎹2.6 mm SMD Light Touch Switches Type: EVPAF ■ Features ● External dimensions: 3.0 mm҂2.6 mm, Height 0.65 mm ● High operability Equipped with an actuator (push plate) ■ Recommended Applications ● Operation switches for portable electronic equipment (Mobile phone, Portable audio) ■ Explanation of Part Numbers 1 2 3 4 5 E V P A F Product Code 6 Type 7 8 9 Height ■ Specifications Type Snap action/Push-on type SPST Rating 10 µA 2 Vdc to 20 mA 15 Vdc (Resistive load) Contact Resistance Electrical 500 m액 max. Insulation Resistance 50 M액 min. (at 100 Vdc) Dielectric Withstanding Voltage 250 Vac for 1 minute Bouncing 10 ms max. (ON, OFF) Operating Force 1.6 N, 2.4 N, 3.4 N Mechanical Travel Endurance Operating Life 0.15 mm 1.6 N, 3.4 N : 100000 cycles min., 2.4 N : 500000 cycles min. Operating Temperature –40 °C to +85 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 8000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 40000 pcs. Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES87 – 00 Sep. 2010 Light Touch Switches/EVPAF ■ Dimensions in mm (not to scale) A' 4-0.5 2-1.8 2.6 With J-bent terminals B B' φ0.65 ( 0.75) (Adhesive) (Push plate) 2-3.4 0.44 A A' B B' Circuit diagram 2-1.2±0.1 A 0.65 4-0.35 (Embossed Taping) 3 2-3.6±0.1 2-2.3±0.1 1.6 A A' 2.6 (0.65) (0.4) (1.15) (0.8) (2-2.5) (1.5) 2-2.6±0.1 EVPAF (Without the remainder of the gate) No. 1 B B' PWB land pattern for reference Part of A-A' terminal is exposed at area. Any land pattern or vias shall not be provided at Operating Force Height Operating Life 1.6 N 0.65 mm 100000 cycles A' 4-0.5 2-1.8 2.6 A With J-bent terminals B B' φ0.7 ( 0.75) (Adhesive) (Push plate) 2-3.4 0.70 0.48 4-0.35 (Embossed Taping) 3 A A' B B' Circuit diagram 2-1.2±0.1 EVPAF 2-3.6±0.1 2-2.3±0.1 1.6 A' 2.6 A (0.65) (0.4) (1.15) (0.8) (2-2.5) (1.5) B B' 2-2.6±0.1 EVPAFFB65 No. 2 (Without the remainder of the gate) Part Numbers area. PWB land pattern for reference Part of A-A' terminal is exposed at area. Any land pattern or vias shall not be provided at Part Numbers Operating Force Height area. Operating Life EVPAF5B70 3.4 N 0.7 mm 100000 cycles EVPAF7B70 2.4 N 0.7 mm 500000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES88 – 00 Sep. 2010 Light Touch Switches/EVPAF ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. Tape width=12.0 mm 230 180 t1 Feeding hole Chip pocket P2 P0 fD0 E 150 F W A B Operation Top (°C) MAX. 260 t2 (Normal Temp.) 90±30 P1 Chip component Tape running direction 40±10 Soldering Time (s) Unit: mm Part No. Height A EVPAF 0.65/0.70 B W 3.75±0.2 2.95±0.2 12.0±0.3 F E P1 P2 P0 D 0 Dia t1 t2 5.5±0.1 1.75±0.1 8.0±0.1 2.0±0.1 4.0±0.1 1.5±0.3 0.3±0.1 0.8±0.2 Item A ● Standard Reel Dimensions in mm (not to scale) T E C B D E φ13.0±0.5 φ21.0±1.0 2.0±0.5 B Rate (mm) φ380.0±2.0 φ80.0±1.0 C D r A W Item W T t r Rate (mm) 13.5±1.0 17.5±1.0 — — t ■ Recommended Shape of Test Pole f1.5 to f2.0 R0.3 mm±0.05 mm Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES89 – 00 Sep. 2010