Radial Leads/SkyCap® GENERAL INFORMATION Dimensions: Millimeters (Inches) W Max. AVX SR Series Conformally Coated Radial Leaded MLC W Max. H Max. Temperature Coefficients: C0G (NP0), X7R, Z5U H Max. T Max. 1.0" Min. Case Material: Epoxy L.S. .762/.030 See Note W Max. Styles SR15, SR20, SR30, SR40, SR50 H Max. Styles SR22, SR27 LD Nom. T Max. 1.0" Min. L.S. .762/.030 T Max. LD Nom. LD Nom. L.S. .762/.030 Lead Material: Solderable 1.0" Min. 1.52/.060 Max. 200, 100, 50 Volts (300V, 400V & 500V also available) See Note Note: Coating clean .784/.031 min. above seating plane Style SR21 HOW TO ORDER SR21 AVX Style SR15 SR20 SR21 SR22 SR27 SR30 SR40 SR50 5 E Voltage Temperature Coefficient 5 = 50V 1 = 100V 2 = 200V 9 = 300V 8 = 400V 7 = 500V A = C0G (NP0) C = X7R E = Z5U 104 M A Capacitance Capacitance Tolerance Failure Rate Leads A = Not Applicable T = Trimmed Leads .230" ± .030" A = Long Leads 1.0" minimum (Other lead lengths are available, contact AVX) R = RoHS Long Lead 1.0" minimum First two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10pF use “R” in place of decimal point, e.g., 1R4 = 1.4pF.) XXX X X X X7R: J = ±5% K = ±10% M = ±20% Z5U: M = ±20% Z = +80% -20% PACKAGING REQUIREMENTS MARKING FRONT C0G (NP0): C = ±.25pF D = ±.5pF F = ±1% (>50pF only) G = ±2% (>25pF only) J = ±5% K = ±10% BACK Capacitance Code Tolerance Code Voltage Code Temp. Char. Code R XXX A XX 3 Digit Date Code Lot Code AVX Logo SR15, 20, 21, 22, 27, 30 SR40, 50 Quantity per Bag 1000 Pieces 500 Pieces Note: SR15, SR20, SR21, SR30, and SR40 available on tape and reel per EIA specifications RS-468. See Pages 29 and 30. 15 Radial Leads/SkyCap® C0G (NP0) Dielectric SIZE AND CAPACITANCE SPECIFICATIONS EIA Characteristic Dimensions: Millimeters (Inches) AVX Style Cap. in.* pF 1.0-9.9 10 15 22 33 39 47 68 100 150 220 330 390 470 680 1000 1500 2200 3900 4700 6800 8200 10,000 15,000 22,000 33,000 39,000 47,000 68,000 100,000 SR15 SR20 SR21 AVX “Insertable” SR07 SR29 SR59 Width 3.81 5.08 5.08 (W) (.150) (.200) (.200) Height 3.81 5.08 5.08 (H) (.150) (.200) (.200) Thickness 2.54 3.175 3.175 (T) (.100) (.125) (.125) Lead Spacing 2.54 2.54 5.08 (L.S.) (.100) (.100) (.200) Lead Diameter .508 .508 .508 (L.D.) (.020) (.020) (.020) Industry Preferred WVDC WVDC WVDC Values in Blue 200 100 50 200 100 50 200 100 50 SR151A1R0DAA SR151A100KAA SR-----A150KAA SR-----A220KAA SR-----A330KAA SR-----A390KAA SR-----A470KAA SR-----A680KAA SR151A101KAA SR-----A151KAA SR-----A221KAA SR-----A331KAA SR-----A391KAA SR-----A471KAA SR-----A681KAA SR211A102KAA SR-----A152KAA SR-----A222KAA SR-----A392KAA SR-----A472KAA SR-----A682KAA SR-----A822KAA SR305A103KAA SR-----A153KAA SR22 N/A N/A 5.08 6.604 (.200) (.260) 5.08 6.35 (.200) (.250) 3.175 4.06 (.125) (.160) 6.35 7.62 (.250) (.300) .508 .508 (.020) (.020) WVDC WVDC 200 100 50 200 100 50 SR-----A223KAA SR-----A333KAA SR-----A393KAA SR-----A473KAA SR-----A683KAA SR-----A104KAA For other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory. *Other capacitance values available upon special request. = Industry preferred values = SR20 only NOTE: Capacitance Ranges available for SR12 SR62 SR64 SR89 16 same same same same as as as as SR15 SR21 SR30 SR21 SR27 SR30 SR40 SR50 SR65 7.62 (.300) 7.62 (.300) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 100 50 SR75 10.16 (.400) 10.16 (.400) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 100 50 N/A 12.70 (.500) 12.70 (.500) 5.08 (.200) 10.16 (.400) .635 (.025) WVDC 100 50 Radial Leads/SkyCap® X7R Dielectric SIZE AND CAPACITANCE SPECIFICATIONS EIA Characteristic Dimensions: Millimeters (Inches) AVX Style Cap. in.* pF 470 1000 1500 2200 3300 4700 6800 10,000 15,000 22,000 33,000 47,000 68,000 100,000 150,000 220,000 330,000 390,000 470,000 1.0 µF 2.2 µF 2.7 µF 4.7 µF SR15 SR20 AVX “Insertable” SR07 Width 3.81 (W) (.150) Height 3.81 (H) (.150) Thickness 2.54 (T) (.100) Lead Spacing 2.54 (L.S.) (.100) Lead Diameter .508 (L.D.) (.020) Industry Preferred WVDC Values in Blue 200 100 50 SR-----C471KAA SR155C102KAA SR-----C152KAA SR-----C222KAA SR-----C332KAA SR-----C472KAA SR-----C682KAA SR215C103KAA SR-----C153KAA SR-----C223KAA SR-----C333KAA SR-----C473KAA SR-----C683KAA SR215C104KAA SR-----C154KAA SR215C224KAA SR-----C334KAA SR-----C394KAA SR305C474KAA SR305C105KAA SR405C225KAA SR505C275KAA SR505C475KAA SR29 5.08 (.200) 5.08 (.200) 3.175 (.125) 2.54 (.100) .508 (.020) WVDC 200 100 50 SR21 SR22 SR27 SR30 SR59 N/A N/A SR65 5.08 5.08 6.604 7.62 (.200) (.200) (.260) (.300) 5.08 5.08 6.35 7.62 (.200) (.200) (.250) (.300) 3.175 3.175 4.06 3.81 (.125) (.125) (.160) (.150) 5.08 6.35 7.62 5.08 (.200) (.250) (.300) (.200) .508 .508 .508 .508 (.020) (.020) (.020) (.020) WVDC WVDC WVDC WVDC 200 100 50 100 50 100 50 200 100 50 SR40 SR50 SR75 N/A 10.16 12.70 (.400) (.500) 10.16 12.70 (.400) (.500) 3.81 5.08 (.150) (.200) 5.08 10.16 (.200) (.400) .508 .635 (.020) (.025) WVDC WVDC 200 100 50 200 100 50 For other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory. *Other capacitance values available upon special request. = Industry preferred values = SR20 only = Extended range = Extended range, SR20 only = Extended range with 0.150" thickness maximum NOTE: Capacitance Ranges available for SR12 SR62 SR64 SR89 same same same same as as as as SR15 SR21 SR30 SR21 17 Radial Leads/SkyCap® Z5U Dielectric SIZE AND CAPACITANCE SPECIFICATIONS EIA Characteristic Dimensions: Millimeters (Inches) AVX Style Cap. in.* pF 10,000 47,000 100,000 150,000 220,000 330,000 470,000 680,000 1.0 µF 1.5 µF 2.2 µF 3.3 µF 4.7 µF AVX “Insertable” Width (W) Height (H) Thickness (T) Lead Spacing (L.S.) Lead Diameter (L.D.) Industry Preferred Values in Blue SR155E103ZAA SR-----E473ZAA SR215E104ZAA SR-----E154ZAA SR215E224ZAA SR215E334ZAA SR215E474ZAA SR-----E684ZAA SR-----105ZAA SR30E155ZAA SR30E225ZAA SR30E335ZAA SR30E475ZAA SR15 SR20 SR21 SR07 3.81 (.150) 3.81 (.150) 2.54 (.100) 2.54 (.100) .508 (.020) WVDC 100 50 SR29 5.08 (.200) 5.08 (.200) 3.175 (.125) 2.54 (.100) .508 (.020) WVDC 100 50 SR59 5.08 (.200) 5.08 (.200) 3.175 (.125) 5.08 (.200) .508 (.020) WVDC 100 50 SR22 N/A 5.08 (.200) 5.08 (.200) 3.175 (.125) 6.35 (.250) .508 (.020) WVDC 100 50 SR27 N/A 6.604 (.260) 6.35 (.250) 4.06 (.160) 7.62 (.300) .508 (.020) WVDC 100 50 SR30 SR65 7.62 (.300) 7.62 (.300) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 100 50 For other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory. *Other capacitance values available upon special request. = Industry preferred values = SR20 only AVX 500 VOLT SKYCAPS** MAXIMUM CAPACITANCE VALUE STYLE* SR29 SR20 SR28 SR59 SR13 SR21 SR30 SR61 SR65 SR40 SR75 SR22 SR27 SR76 SR50 *Consult pages 22 and 23 for style sizes. **Voltage rating based on DWV of 150% of rated voltage. 18 C0G (NP0) 900 pF 1800 pF X7R .015 µF .033 µF 900 pF .015 µF 1800 pF .033 µF 7200 pF .12 µF .015 µF .27 µF 1800 pF 1800 pF .015 µF .036 µF .033 µF .033 µF .27 µF .59 µF SR40 SR50 SR75 10.16 (.400) 10.16 (.400) 3.81 (.150) 5.08 (.200) .508 (.020) WVDC 100 50 N/A 12.70 (.500) 12.70 (.500) 5.08 (.200) 10.16 (.400) .635 (.025) WVDC 100 50 SkyCap®/AR Series Configurations by Lead Spacing LEAD SPACING .100 ±.030 Dimensions: Inches (Millimeters) AR07/SR07* AR14/SR14 AR15/SR15* AR20/SR20* (T=.100) (T=.100) (T=.100) (T=.125) .200 (5.08) Max. .150 (3.81) Max. .250 (6.35) Max. .200 (5.08) Max. .150 (3.81) Max. .050 (1.27) Clean Above Seating Plane Meniscus Free .031 (.787) Above Seating Plane 1.0 (25.4) Min. .150 (3.81) Max. .300 (7.62) Max. .060 (1.52) Max. .230 (5.84) ±.030 .100 (2.54) ±.030 .200 (5.08) Max. 1.0 (25.4) Min. .100 (2.54) ±.030 1.0 (25.4) Min. .060 (1.52) Max. .100 (2.54) ±.030 AR29/SR29* AR62/SR62* SR62-LP* (T=.125) (T=.125) (T=.100) .210 (5.33) Max. .170 (4.32) Max. .200 (5.08) Max. 0.04 (1.02) .358 (9.09) Max. a 1.0 (25.4) Min. 0.008 ±0.002 (.203 ±.051) Meniscus Free .031 (.787) Above Seating Plane 1.0 (25.4) Min. .100 (2.54) ±.030 0.100 ±.031 (2.54 ±.787) .100 (2.54) ±.030 Leads = #22 AWG LEAD SPACING .271 (6.88) Max. 0.040 (1.016)Min. .250 (6.35) Max. .100 (2.54) ±.030 Leads = #22 AWG .200 ±.030 Dimensions: Inches (Millimeters) AR12/SR12* SR13* AR21/SR21* SR21-85* SR28* (T=.100) (T=.125) (T=.125) (T=.125) (T=.125) .200 (5.08) Max. .200 (5.08) Max. .150 (3.81) Max. .150 (3.81) Max. .200 (5.08) Max. .230 (5.84) Max. 1.0 (25.4) Min. Meniscus Free .031 (.787) Above Seating Plane .350 (8.89) Max. .200 (5.08) ±.030 .031 (.787) Clean Above Seat .200 (5.08) Max. .300 (7.62) Max. .300 (7.62) Max. Meniscus Free .031 (.787) Above Seating Plane 1.0 (25.4) Min. .200 (5.08) Max. .250 (6.35) Max. Meniscus Free .031 (.787) Above Seating Plane 1.0 (25.4) Min. 1.0 (25.4) Min. 1.0 (25.4) Min. .200 (5.08) ±.030 .200 (5.08) ±.030 .200 (5.08) ±.030 .200 (5.08) ±.030 AR30/SR30* SR30-LP* AR32/SR32* AR40/SR40* AR59/SR59* (T=.150) (T=.150) (T=.150) (T=.150) (T=.125) .300 (7.62) Max. .300 (7.62) MAX. .300 (7.62) Max. .225 (5.71) MAX. .300 (7.62) Max. 1.0 (25.4) Min. .060 (1.52) Max. 1.0 (25.4) Min. .059 (1.5) Max. .400 (10.16) Max. .390 (9.91) Max. Meniscus Free .031 (.787) Above Seating Plane .200 (5.08) Max. .400 (10.16) Max. .031 (.787) Clean Above Seat .300 (7.62) Max. 1.0 (25.4) Min. .200 (5.08) ±.030 .200 (5.08) ±.030 .200 (5.08) ±.030 1.0 (25.4) Min. 1.0 (25.4) Min. .060 (1.52) Max. .200 (5.08) ±.030 .200 (5.08) ±.030 SR61 SR63* SR64* SR64-LP* (T=.150) (T=.150) (T=.150) (T=.150) .300 (7.62) Max. .500 (12.7) Max. .500 (12.7) Max. Meniscus Free .031 (.787) Above Seating Plane .300 (7.62) Max. .300 (7.62) Max. .230 (5.84) ±.030 .500 (12.7) Max. 0.040 (1.02) Min. .200 (5.08) ±.030 .200 (5.08) ±.030 .330 (8.38) Max. 0.04 (1.02) .300 (7.62) Max. .400 (10.16) Max. a 1.00 (25.4) Min. 1.0 (25.4) Min. (T=.150) .300 (7.62) Max. .268 (6.81) Max. a .137/.196 (3.48/4.98) AR65/SR65* .200 (5.08) ±.031 a = .009 ±.002 (.229 ±.051) Leads = #22 AWG 1.0 (25.4) Min. 1.0 (25.4) Min. .200 (5.08) ±.030 .200 (5.08) ±.030 Leads = #22 AWG 23 SkyCap®/AR Series Configuration by Lead Spacing .200 ±.030 continued LEAD SPACING SR65-LP* (T=.150) .300 (7.62) MAX. Dimensions: Inches (Millimeters) SR67 AR75/SR75* AR89/SR89* (T=.125) (T=.150) Leads = #22 AWG (T=.125) .200 (5.08) Max. .400 (10.16) Max. .300 (7.62) Max. Seated Height .031 (.787) Seated Plane .350 (8.89) MAX. COATING LIMIT .031 (.787) Min. Clean Lead Above Seat 1.0 (25.4) Min. .215 (5.46) Max. 0.040 (1.02) Min. .400 (10.16) Max. .480 (12.2) Max. .230 (5.84) ±.030 .260 (6.60) Max. a 1.00 (25.4) Min. 0.025 ±0.001 (.635 ±.025) .200 (5.08) ±.031 .200 (5.08) ±.030 .200 (5.08) ±.030 Meniscus Free .031 (7.87) Above Seating Plane LEAD SPACING .250 ±.030 a = .009 ±.002 (.229 ±.051) 1.0 (25.4) Min. .200 (5.08) ±.030 Leads = #22 AWG Dimensions: Inches (Millimeters) SR16 SR22 SR33 (T=.125) (T=.125) (T=.150) .200 (5.08) Max. Meniscus Free .031 (.787) Above Seating Plane .390 (9.91) Max. .200 (5.08) Max. .300 (7.62) Max. .400 (10.16) Max. .300 (7.62) Max. .230 (5.84) ±.030 1.0 (25.4) Min. .250 (6.35) ±.030 .230 (5.84) ±.030 .250 (6.35) ±.030 LEAD SPACING .250 (6.35) ±.030 .300 ±.030 SR27 SR34 (T=.150) (T=.150) .260 (6.60) Max. .300 (7.62) Max. Meniscus Free .031 (.787) Above Seating Plane .250 (6.35) Max. 1.0 (25.4) Min. Meniscus Free .031 (.787) Above Seating Plane .350 (8.89) Max. 1.0 (25.4) Min. .300 (7.62) ±.030 .300 (7.62) ±.030 .375 ±.030 LEAD SPACING LEAD SPACING .400 ±.030 AR38/SR38 SR50 SR76 (T=.150) (T=.200) (T=.175) .500 (12.7) Max. .500 (12.7) Max. .300 (7.62) Max. Meniscus Free .031 (.787) Above Seating Plane .500 (12.7) Max. .425 (10.8) Max. 1.0 (25.4) Min. 1.0 (25.4) Min. .060 (1.52) Max. .440 (11.2) Max. .031 (.787) Min. Clean Lead Above Seat .375 (9.53) ±.030 Leads = #22 AWG 24 Seating Plane 1.0 (25.4) Min. .025 (0.64) ±.004 .400 (10.16) ±.030 .400 (10.16) ±.030 NOTES: .480 (12.2) Max. 1. All leads are #24 AWG unless otherwise noted. 2. Available in tape and reel packaging(*). 3. Other styles are also available, contact factory. 4. (T = XXX) under type designation is maximum thickness in inches. Radial Leads/Packaging Tape and Reel GENERAL INFORMATION THE INSERTABLES 1. Standard reel diameter is 355 millimeters (14 inches) maximum. STANDARD 1 2. Reeling standard (#1 or #2) should be specified when ordering. 32 mm max. HOW TO ORDER 16 ± 0.5 mm To specify tape and reel packaging, add TR1, TR2 or TRX to the end of the AVX 12 digit part number. SR07 Examples: SR29 SR59 SR65 SR75 STANDARD 2 SR215C104KAATR1 SR305E105MAATR2 SR215C103JAATRX 32 mm max. 19 mm min. to base of unit SR07 SR29 STANDARD 1 SR59 SR65 SR75 Dimensions in Millimeters 32 max. 32 max. 20 +1.5 -1.0 16±.5 SR28 SR29 SR12 SR21 SR13 SR32 16 min. SR21 (TRX) MR05 SR32 (TRX) SR63 (TRX) SR15 SR20 STANDARD 2 32 max. MR06 SR30 SR40 Dimensions in Millimeters 32 max. 19 min. 19 min. SR29 SR28 SR12 SR21 SR13 SR32 SR15 SR20 MR05 S T S K E D R C W A B F O N M SR30 SR40 DESCRIPTION DIMENSIONS (MM) A. Feed Hole Pitch B. Feed Hole Diameter C. Feed Hole Location 12.70 ± .20 3.99 ± .20 9.02 ± .51 D. Component Lead Spacing +.79 5.00+.79 -.20 or 2.54 -.20 E. Component Lead Location 3.81 ±.51 or 5.00 ±.51 for 2.54 lead spacing 2.00 maximum F. Component Lead Protrusion (edge of carrier to cut end of lead) K. Component Body Location Q L MR06 X L. Carrier Tape Width M. Carrier Tape Assembly Thickness N. Carrier Tape Spliced Thickness O. Carrier Tape Spliced Length Q. Adhesive Tape Border R. Component Bent Leads (either direction) S. Component Misalignment T. Component Pitch W. Adhesive Tape Width X. Carrier Tape Thickness Y. Cumulative Pitch over 20 Pitches 6.35 ±.41 18.01 +1.02 -.51 .71 ± .20 1.42 maximum 50.80 - 88.90 3.00 maximum .79 maximum .99 maximum 12.70 ±.99 5.00 minimum .51 ±.10 254 ±2.00 29 Radial Leads/Packaging REEL DIRECTION QUANTITY PER REEL SR/AR Leads on top of carrier strip, body away Unreel from LEFT to RIGHT OVER TOP of reel PART PCS SR15, 07, 12 3500 SR20, 21, 23, 28 13, 29, 59, 62, 89 3000 SR30, 32, 40, 63, 64 65, 75 2000 MR05, 06 2500 G DESCRIPTION A – Reel Diameter B – Reel Outside Width C – Reel Inside Width D – Core Diameter (O.D.) E – Hub Recess Diameter F – Hub Recess Depth G – Arbor Hole Diameter A F DIMENSIONS (MM) 304.80 - 355 50.80 maximum 38.10 - 46.02 102.01 maximum 86.36 maximum 9.50 minimum 25.40 - 30.48 D C B E CONVERSION TABLE MM .10 .20 .38 .41 .51 .71 .79 .99 1.02 1.42 30 IN .004 .007 .015 .016 .020 .028 .031 .039 .040 .056 MM 1.52 2.00 2.54 3.00 3.18 3.48 3.81 3.99 4.45 4.98 IN MM IN MM .060 .079 .100 .118 .125 .137 .150 .157 .175 .196 5.00 5.08 6.22 6.35 6.60 6.99 7.62 8.89 9.02 9.50 .197 .200 .245 .250 .260 .275 .300 .350 .355 .374 9.91 10.03 10.16 11.68 12.50 12.70 16.00 18.01 25.40 30.48 IN .390 .395 .400 .460 .492 .500 .630 .709 1.000 1.200 MM 32.00 38.10 46.02 50.80 86.36 88.90 102.01 254.00 304.80 355.00 IN 1.260 1.500 1.812 2.000 3.400 3.500 4.016 10.000 12.000 14.000