Component list Bill of Materials Print For Variant [Default_assembly] of Project [CryptoAuth_Xplained_Pro.PrjPCB] (No PCB Document Selected) Source Data From: CryptoAuth_Xplained_Pro.PrjPCB Project: CryptoAuth_Xplained_Pro.PrjPCB Variant: Default_assembly Report Date: Print Date: 4/27/2015 5:43:06 PM <Parameter Current<Parameter CurrentTime not found> # Designator Quantity Value Manufacturer MPN Description 1 C1, C3, C4 3 100n Kemet C0402C104K4RACTU Ceramic capacitor, SMD 0402, X7R, 16V, +/-10% 2 C100, C101 2 4.7uF Murata GRM155R60J475ME87D Ceramic capacitor, SMD 0402, X5R, 6.3V, +/-20% (de33687) 3 D100 1 BAT54XV2T1G ON Semiconductor BAT54XV2T1G Schottky diode, If:200mA, Vf:0.35V, Vrrm:30V, SOD-523 4 E1, E2 2 SJ-5076 3M SJ-5076 2.8mm adhesive feet,diam 8.0mm 5 J3 1 HMTSW-103-23-F-S-237 SAMTEC HMTSW-103-23-F-S-237 1x3 pin header, 2.54mm pitch, Pin-in-Paste THM, 1mm hole 2x10, female pin header receptable, right-angled, 2.54mm pitch, THM, Pin In Paste 6 J100 1 TF201-2*10RGF-W2-NF Pro-data International Corp F201-2*10RGF-W2-NF 7 JS3 1 SNT-100-BK-G SAMTEC SNT-100-BK-G 8 PCB1 1 CryptoAuth Xplained Pro PCB CryptoAuth Xplained Pro PCB 9 R1, R2 2 3.9k Thick film resistor, SMD 0603, 1/10W, 1% 10 R3 1 0R 11 R100 1 100k 12 U1 1 ATSHA204 SWI UDFN8 13 U2 1 ATECC508A I2C UDFN Panasonic ERJ-3GEY0R00V Jumper cap for 2.54mm pinheader Thick film resistor, SMD 0603, 1/10W, 1% Thick film resistor, SMD 0402, 1/16W, 1% ATMEL ATSHA204A-MAHCZ-T ATSHA204 with 1-wire interface and UDFN8 package ATECC508A with an I2C Interface and a 8 Pin UDFN Package with Paddle 14 U3 1 ATAES132A I2C UDFN AES132A with an I2C Interface in a UDFN Package 15 U4 1 ATSHA204A I2C UDFN ATSHA204A with and I2C Interface in the UDFN8 Pin Package with Paddle 24 Approved Altium Limited Confidential Notes 7/29/2015 Page 1