Datasheet

PHOTOMULTIPLIER TUBE MODULE
H11411
OVER VIEW
The H11411 is a photomultiplier tube module that integrates a 51-mm (2") diameter head-on photomultiplier
tube with a high-voltage power supply circuit. The
H11411 has a large effective photocathode area of 46
mm diameter and this product is suited for scintilation
counting application.
FEATURES
●High energy physics
●Radiation measurement
●Industrial measurement
●Fast time response
SPECIFICATIONS
(at +25 °C)
Parameter
Luminous sensitivity
Blue sensitivity index (CS 5-58)
Red / White ratio
Radiant sensitivity *3
Standard type
Anode
Cathode
Spectral response
Input voltage
Max. input voltage
Max. input current *1
Max. output signal current *2
Max. control voltage
Recommended control voltage adjustment range
Effective area
Peak sensitivity wavelength
Luminous sensitivity *2
Radiant sensitivity *2 *3
Dark current *2 *4
Min.
Typ.
Typ.
Typ.
Typ.
Min.
Typ.
Typ.
Typ.
Max.
*2
Rise time
Ripple noise *2 *5 (peak to peak)
Settling time *6
Operating ambient temperature *7
Storage temperature *7
Weight
Max.
Max.
Value
300 to 650
+11.5 to +15.5
+18
5.0
200
+1.9 (Input impedance 1 MΩ)
+0.5 to +1.8 (Input impedance 1 MΩ)
46
420
60
90
10.5
—
85
30
300
2.8 × 105
6
40
2.0
1
10
+5 to +50
-20 to +50
560
Unit
nm
V
V
mA
µA
V
V
mm
nm
µA/lm
—
—
mA/W
A/lm
A/W
nA
ns
mV
s
°C
°C
g
NOTE: *1: At +15 V input voltage, +1.75 control voltage, and output current equal to dark current
*2: Control voltage=+1.75 V
*3: Measured at the peak sensitivity wavelength
*4: After 30 minutes storage in darkness, output of dark surrent.
*5: Cable RG-174/U, Cable length 450 mm, Load resistance= 1 MΩ, Load capacitance=22 pF
*6: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V.
*7: No condensation
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K.
PHOTOMULTIPLIER TUBE MODULE H11411
Figure 1: Typical spectral response
Figure 2: Typical gain
TPMOB0272EA
10
100
OUTPUT (1 mV/div.)
LOAD RESISTANCE: 1 MΩ
LOAD CAPACITANCE: 22 pF
CONTROL VOLTAGE: +1.75 V
6
10
10
GAIN
CATHODE RADIANT SENSITIVITY (mA/W)
Figure3: Ripple noise
7 TPMOB0242EA
TPMOB0241EA
1
5
10
4
0.1
10
2 (µs/div.)
0.01
200
3
300
400
500
600
700
10
800
0.5
0.7
1.0
1.5
2.0
CONTROL VOLTAGE (V)
WAVELENGTH (nm)
Figure 4: Sensitivity adjustment method
VOLTAGE PROGRAMMING
RESISTANCE PROGRAMMING
POWER SUPPLY
SIGNAL OUTPUT
LOW VOLTAGE INPUT(RED)
GND (BLACK)
Vref OUTPUT (BLUE)
Vcont INPUT (WHITE)
• Electrically insulate the
reference voltage output.
• Adjust the control voltage to
adjust the sensitivity.
POWER SUPPLY
PHOTOSENSOR MODULE
SIGNAL OUTPUT
LOW VOLTAGE INPUT(RED)
GND (BLACK)
Vref OUTPUT (BLUE)
Vcont INPUT (WHITE)
+15 V
GND
+15 V
GND
CW
PHOTOSENSOR MODULE
MONITOR
+0.5 V to
+1.8 V
POTENTIOMETER (10 kΩ)
When using a potentiometer, adjust sensitivity while monitoring
the control voltage so it does not exceed +1.9 V.
GND
TPMOC0241EA
Figure 5: Dimensional outline (Unit: mm)
46 MIN.
52 ± 1
60 ± 0.5
MAGNETIC SHIELD CASE
1.0 MAX.
200 ± 1
450 ± 20
LOW VOLTAGE INPUT (+15 V) : AWG26 (RED)
GND
: AWG26 (BLACK)
Vcont INPUT *1 (+0.5 V to +1.8 V) : AWG26 (WHITE)
Vref OUTPUT (+2.5 V)
: AWG26 (BLUE)
SIGNAL OUTPUT
: RG-174/U
*1 Control Voltage: +1.75 V = Supply Voltage to PMT: -1750 V
TPMOA0074EA
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
TPMO1070E01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected]
OCT. 2015 IP
China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]