A RELEASED PER EWR-ER5208 BY APPD DATE CWB DESCRIPTION CWB 11/14/07 1.947 49.45 WHEN ASSEMBLED REV .905 22.99 TO TIP OF CABLE INNER CONDUCTOR .500 12.70 .262 6.65 .292 7.41 .156 3.95 .880 22.35 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD12-0000. .84 21.3 .545 13.84 .110 2.79 2. MATERIAL SPECIFICATIONS: SLEEVE: BRASS PER ASTM B16. CENTER CONTACT, BODY, OUTER CONTACT, AND FERRULE: COPPER ALLOY INSULATOR: TEFLON PER ASTM D1710 O-RING: SILICON RUBBER PER ZZ-R-765 SHRINK TUBE: ADHESIVE LINED POLYOLEFIN .015 .38 MIN 3. FINISH SPECIFICATIONS: CENTER CONTACT: GOLD PER ASTM B4888 ALL OTHER METAL PARTS: TRI-PLATE 90° CABLE TRIM DIMENSIONS 4. FERRULE AND SHRINK TUBING SHIPPED LOOSE. 5. DESIGNED FOR USE WITH LMR240 AND EQUIVALENT CABLES. 6. CRIMP FERRULE USING .255 HEX DIE. 7. MATES WITH STANDARD TYPE N INTERFACE PER MIL-STD-348A, FIG 304.2 (.187±.015 THREAD LENGTH). 8. MEETS REQUIREMENTS OF IP67. 9. ELECTRICAL SPECIFICATIONS: FREQUENCY RANGE: DC TO 11 GHz VSWR: 1.18 MAX. CATALOG P/N: 120-900-2400R PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX ± .01 [0.3] .XXX ± .005 [0.13] .XXXX ± .XXXX ANGLES: ± 2° SCALE: 3:1 WinchesterElectronics Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING DRAWN PSM APPROVED WPM DATE APPROVED 03/02/06 DCam DATE APPROVED 03/08/06 CCA DATE 03/04/06 DATE 03/08/06 QC-N STRAIGHT PLUG CRIMP ATTACHMENT A SD120-900-2400R SHT 1 OF 1 REV A