DESCRIPTION G REVISED PER ECR-ER4065 2. MATERIAL SPECIFICATIONS: ALL METAL PARTS: COPPER ALLOY INSULATOR: TEFLON PER ASTM D1710 3. FINISH SPECIFICATIONS: CENTER CONTACT: .000030 MIN. GOLD PER ASTM B4888 OVER .000100 MIN. COPPER PER ASTM B734 BODY: .000015 MIN. GOLD PER ASTM B4888 OVER .000100 MIN. COPPER PER ASTM B734 ALL OTHER METAL PARTS: .000100 MIN. TIN PER ASTM B545 OVER COPPER FLASH BY APPD DATE DCAM REV CWB 09/11/07 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD45-0000. .34 8.6 .24 6.1 4. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 50 OHMS FREQUENCY RANGE: DC TO 3GHz NON-MAGNETIC 5. FOR USE WITH RG-316 CABLE OR EQUIVALENT. 6. FOR CABELING PROCEDURES USE CAP 9-09 WITH TRIMMING DIMENSIONS SHOWN. 7. CRIMP FERRULE USING .128 HEX. DIE. .204 5.18 .250±.015 6.35±.38 .220 5.59 .090 2.29 .180 4.57 .152 3.86 .128 3.25 CABLE TRIMING DIMENSIONS .069 1.75 CATALOG P/N: 452-900-0630J PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 4:1 WinchesterElectronics Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING DRAWN CWB APPROVED JEM DATE APPROVED 09/11/07 SD DATE APPROVED 03/12/03 KJT MCX RIGHT ANGLE PLUG DATE 03/13/03 DATE 03/12/03 A SD452-900-0630J SHT 1 OF 1 REV G