Download

Field bus coupler
IP 20
PROFIBUS field bus coupler
DP-V1; Web server tool;
Sub-D connection
In automation technology, the PROFIBUS-DP standard enables the controlled
incorporation of sensors and actuators via one central control unit. The UR20-FBCPB-DP field bus coupler is a PROFIBUS-DP-V1 participant certified by the Profibus
user organisation. With options for connecting up to 64 u-remote participants,
it serves as the head module for the u-remote system bus. The PROFIBUS-DP
coupler has a Sub-D plug-in connector and supports all services according to the
DP-V1 specification. Two rotary coding switches are used to address individual
PROFIBUS participants.
A
The coupler can be activated with a system-independent web server application
via the USB service interface. All information, such as diagnoses, status values
and parameters, can therefore be read out. All connected inputs can also be
simulated or outputs set. The initial system power supply is already integrated in
the field bus coupler. Power is supplied via two 4-pin connectors, separated into
the input and output current paths.
Since the PROFIBUS-DP products from Weidmüller make full use of all the latest
technological possibilities, such as GSD files and diagnosis messages, they
actively support your application in the most important tasks – from engineering
and commissioning fault diagnosis.
More Performance. Simplified.
Block diagram UR20-FBC-PB-DP
USB
8x
µC
Internal from the control card
Sub-D
24 V/10 A Input
DC
System
bus
System
bus
System
bus
USYS
USYS
UIN
UIN
UOUT
UOUT
DC
UIN
UOUT
24 V/10 A Output
UR20-FBC-PB-DP
A.8
2429060000 – 2016
Field bus coupler
PROFIBUS
UR20-FBC-PB-DP
IP 20
•2 x 10 A current paths
•Address can be set using rotary switch
•Web server
•System supply of 64 I/O modules
•Temperature range –20… +60 °C
•PROFIBUS DP-V1 up to 12 MBaud
A
Technical data
System data
Connection
Field bus protocol
Process data
Parameter data
Diagnostic data
Max. number of I/O modules
Configuration interface
Transmission rate of field bus
Transmission speed of u-remote system bus
Supply
Supply voltage for system and inputs
Supply voltage for outputs
Feed current for input modules, max.
Feed current for output modules, max.
Current consumption (IIN in power segment of field bus coupler), typ.
General data
Weight
Dimensions (H/W/D)
Note
Ordering data
Module variants
Field bus coupler, PROFIBUS DP-V1
Note
Accessories
Coding elements
Termination kit
Swivel marker
Connection marker for pusher custom printing
Connection marker for pusher neutral
Module marker for custom printing
Module marker for neutral
Thermotransfer version (Material: Polyester)
Thermotransfer version (Material: Polyester)
Paper version for Laserprinter
USB cable (USB A to Micro USB)
Replacement parts
Plug-in connector unit
Note
9-pin SUB-D connector
PROFIBUS DP-V1
488 Bytes
244 Bytes
244 Bytes
64
Micro USB 2.0
12 Mbps
48 Mbps
PB-DP
Shield 1
Data B 3
Data A 8
DGND 5
VP +5V 6
24 V DC +20 % / –15 %
24 V DC +20 % / –15 %
10 A
10 A
100 mA
9
5
X1
Download of GSD-file on www.weidmueller.com
Qty.
1
Order No.
1334870000
Qty.
100
5
20
192
960
100
500
1
1
10
1
Order No.
1483050000
1346610000
1339920000
1323700000
1323710000
1341610000
1341630000
1429910000
1429420000
1429430000
1487980000
5
1361520000
24 V DC IN
24 V DC IN
GND IN
GND IN
24 V DC OUT
24 V DC OUT
GND OUT
GND OUT
220 g
120 mm (with catch lever 128 mm) x 52 mm x 76 mm
Type
UR20-FBC-PB-DP
1
6
A termination kit (UR20-EBK-ACC) is included
in the coupler package
Type
KOSM BHZ5.00
UR20-EBK-ACC
UR20-SM-ACC
PM 2.7/2.6 MC SDRVPE
PM 2.7/2.6 MC NE WS
DEK 5/8-11.5 MC SDR
DEK 5/8-11.5 MC NE WS
THM UR20 GE *1)
THM UR20 WS *1)
ESO UR20 DIN A4 WS *2)
IE-C6FP8LE0015M40M40-E
UR20-PK-1334870000-SP
Product standard
EMC
ATEX
UL
MSIP
IEC 61131-2
EN 61000
EN 60079
UL 508
MSIP-REM-WMG-1334870000
*1) 1 roll = 1000 label = 1 Qty.
*2) 1 sheet = 60 label = 1 Qty.
Let’s connect.
2429060000 – 2016
A.9
IP 20
Field bus coupler
A
PROFINET field bus coupler
Web server tool;
two RJ45 ports; 100 Mbps
PROFINET is gaining in importance as a rapidly growing Industrial Ethernet
Standard. By supporting real-time functionality (RT) and isochronous real-time
functionality (IRT), the technology complies with modern system and application
requirements to a large extent. The UR20-FBC-PN-IRT field bus coupler is a
PROFINET-IRT participant certified by the PROFIBUS user organisation. It is able
to connect up to 64 u-remote participants and two Ethernet ports with integrated
switch to implement a line network structure.
The coupler can be activated with a system-independent web server application
via the USB service interface or the Ethernet ports. All information, such as
diagnoses, status values and parameters, can therefore be read out. All connected
inputs can also be simulated or outputs set. The initial system power supply
is already integrated in the field bus coupler. Power is supplied via two 4-pin
connectors, separated into the input and output current paths.
Since the PROFINET products from Weidmüller make full use of all the latest
technological possibilities, such as GSDML files and diagnosis messages, they
actively support your application in the most important tasks – from engineering
and commissioning to faults.
More Performance. Simplified.
Block diagram UR20-FBC-PN-IRT
USB
8x
µC
Internal from the control card
RJ45
24 V/10 A Input
DC
System
bus
System
bus
System
bus
USYS
USYS
UIN
UIN
UOUT
UOUT
DC
UIN
RJ45
UOUT
24 V/10 A Output
UR20-FBC-PN-IRT
A.10
2429060000 – 2016
Field bus coupler
PROFINET
UR20-FBC-PN-IRT
IP 20
•2 x 10 A current paths
•Web server
•System supply of 64 I/O modules
•Temperature range –20… +60 °C
•PROFINET IRT/RT capable
•PROFINET diagnosis
•LLDP – Neighborhood detection
A
Technical data
System data
Connection
Field bus protocol
Process data
Parameter data
Diagnostic data
Fast startup
Max. number of I/O modules
Configuration interface
Transmission rate of field bus
Transmission speed of u-remote system bus
Supply
Supply voltage for system and inputs
Supply voltage for outputs
Feed current for input modules, max.
Feed current for output modules, max.
Current consumption (IIN in power segment of field bus coupler), typ.
General data
Weight
Dimensions (H/W/D)
Note
Ordering data
Module variants
Field bus coupler, PROFINET IRT
Note
Accessories
Coding elements
Termination kit
Swivel marker
Connection marker for pusher custom printing
Connection marker for pusher neutral
Module marker for custom printing
Module marker for neutral
Thermotransfer version (Material: Polyester)
Thermotransfer version (Material: Polyester)
Paper version for Laserprinter
USB cable (USB A to Micro USB)
Replacement parts
Plug-in connector unit
Note
2 x RJ-45
PROFINET IO (RT/IRT)
1.024 Bytes
1.485 Bytes
1.485 Bytes
yes
64
Micro USB 2.0
100 Mbps
48 Mbps
TD+ 1
TD– 2
RD+ 3
RD– 6
TD+ 1
TD– 2
RD+ 3
RD– 6
24 V DC +20 % / –15 %
24 V DC +20 % / –15 %
10 A
10 A
116 mA
X1
PN-IRT
X2
24 V DC IN
24 V DC IN
GND IN
GND IN
24 V DC OUT
24 V DC OUT
GND OUT
GND OUT
220 g
120 mm (with catch lever 128 mm) x 52 mm x 76 mm
Download of GSDML-file on www.weidmueller.com
Type
UR20-FBC-PN-IRT
Qty.
1
Order No.
1334880000
Qty.
100
5
20
192
960
100
500
1
1
10
1
Order No.
1483050000
1346610000
1339920000
1323700000
1323710000
1341610000
1341630000
1429910000
1429420000
1429430000
1487980000
5
1484120000
A termination kit (UR20-EBK-ACC) is included
in the coupler package
Type
KOSM BHZ5.00
UR20-EBK-ACC
UR20-SM-ACC
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC NE WS
DEK 5/8-11.5 MC SDR
DEK 5/8-11.5 MC NE WS
THM UR20 GE *1)
THM UR20 WS *1)
ESO UR20 DIN A4 WS *2)
IE-C6FP8LE0015M40M40-E
UR20-PK-1334880000-SP
Product standard
EMC
ATEX
UL
MSIP
IEC 61131-2
EN 61000
EN 60079
UL 508
MSIP-REM-WMG-1334880000
*1) 1 roll = 1000 label = 1 Qty.
*2) 1 sheet = 60 label = 1 Qty.
Let’s connect.
2429060000 – 2016
A.11
IP 20
Field bus coupler
A
EtherCAT field bus coupler
Web server tool;
two RJ45 ports; 10/100 Mbps
EtherCAT is a popular field bus standard for systems with stringent time
requirements. The UR20-FBC-EC field bus coupler is an EtherCAT participant
certified by the EtherCAT Technology Group. With options for connecting up to
64 u-remote participants, it serves as the head module for the u-remote system
bus. The EtherCAT coupler has two Ethernet ports with integrated switch for
implementing a line network structure.
The coupler can be activated with a system-independent web server application
via the USB service interface or the Ethernet ports. All information, such as
diagnoses, status values and parameters, can therefore be read out. All connected
inputs can also be simulated or outputs set. The system's initial power supply
is already integrated in the field bus coupler. Power is supplied via two 4-pin
connectors, separated into the input and output current paths.
Since the EtherCAT products from Weidmüller make full use of all the latest
technological possibilities, such as use of XML files, they actively support your
application in the most important tasks – from engineering and commissioning to
fault diagnosis.
More Performance. Simplified.
Block diagram UR20-FBC-EC
USB
8x
µC
Internal from the control card
RJ45
24 V/10 A Input
DC
System
bus
System
bus
System
bus
USYS
USYS
UIN
UIN
UOUT
UOUT
DC
UIN
RJ45
UOUT
24 V/10 A Output
UR20-FBC-EC
A.12
2429060000 – 2016
Field bus coupler
EtherCAT
UR20-FBC-EC
IP 20
•2 x 10 A current paths
•Web server
•System supply of 64 I/O modules
•Temperature range –20… +60 °C
•Various EtherCAT services
A
Technical data
System data
Connection
Field bus protocol
Process data
Parameter data
Diagnostic data
Max. number of modules
Configuration interface
Transmission rate of field bus
Transmission speed of u-remote system bus
Supply
Supply voltage for system and inputs
Supply voltage for outputs
Feed current for input modules, max.
Feed current for output modules, max.
Current consumption (IIN in power segment of field bus coupler), typ.
General data
Weight
Dimensions (H/W/D)
Note
Ordering data
Module variants
Field bus coupler, EtherCAT
Note
Accessories
Coding elements
Termination kit
Swivel marker
Connection marker for pusher custom printing
Connection marker for pusher neutral
Module marker for custom printing
Module marker for neutral
Thermotransfer version (Material: Polyester)
Thermotransfer version (Material: Polyester)
Paper version for Laserprinter
USB cable (USB A to Micro USB)
Replacement parts
Plug-in connector unit
Note
2 x RJ-45
EtherCAT
1024 Byte
64 x 64 = 4KB
64 x 50 Bytes
64
Micro USB 2.0
100 Mbps
48 Mbps
TD+ 1
TD– 2
RD+ 3
RD– 6
TD+ 1
TD– 2
RD+ 3
RD– 6
24 V DC +20 % / –15 %
24 V DC +20 % / –15 %
10 A
10 A
130 mA
Download of ESI-file on www.weidmueller.com
Qty.
1
Order No.
1334910000
Qty.
100
5
20
192
960
100
500
1
1
10
1
Order No.
1483050000
1346610000
1339920000
1323700000
1323710000
1341610000
1341630000
1429910000
1429420000
1429430000
1487980000
5
1484440000
EC
X2
24V DC IN
24V DC IN
GND IN
GND IN
24V DC OUT
24V DC OUT
GND OUT
GND OUT
220 g
120 mm (with catch lever 128 mm) x 52 mm x 76 mm
Type
UR20-FBC-EC
X1
A termination kit (UR20-EBK-ACC) is included
in the coupler package
Type
KOSM BHZ5.00
UR20-EBK-ACC
UR20-SM-ACC
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC NE WS
DEK 5/8-11.5 MC SDR
DEK 5/8-11.5 MC NE WS
THM UR20 GE *1)
THM UR20 WS *1)
ESO UR20 DIN A4 WS *2)
IE-C6FP8LE0015M40M40-E
UR20-PK-1334910000-SP
Product standard
EMC
ATEX
UL
MSIP
IEC 61131-2
EN 61000
EN 60079
UL 508
MSIP-REM-WMG-1334910000
*1) 1 roll = 1000 label = 1 Qty.
*2) 1 sheet = 60 label = 1 Qty.
Let’s connect.
2429060000 – 2016
A.13
IP 20
Field bus coupler
A
Modbus-TCP field bus coupler
Web server tool;
two RJ45 ports; 10/100 Mbps
System safety around the globe is provided by the Modbus-TCP version, which is
stated in IEC 61158 as an Industrial Ethernet Standard. The UR20-FBC-MOD-TCP
from Weidmüller is a field bus coupler designed in accordance with IEC 61158.
With options for connecting up to 64 u-remote participants, it serves as the head
module for the u-remote system bus.
The coupler can be activated with a system-independent web server application
via the USB service interface or the Ethernet ports. All information, such as
diagnoses, status values and parameters, can therefore be read out. All connected
inputs can also be simulated or outputs set. The system's initial power supply
is already integrated in the field bus coupler. Power is supplied via two 4-pin
connectors, separated into the input and output current paths.
Since the Modbus-TCP products from Weidmüller make full use of all the latest
technological possibilities, such as diagnosis options, they actively support your
application in the most important tasks – from engineering and commissioning to
fault diagnosis.
More Performance. Simplified.
Block diagram UR20-FBC-MOD-TCP
USB
8x
µC
Internal from the control card
RJ45
24 V/10 A Input
DC
System
bus
System
bus
System
bus
USYS
USYS
UIN
UIN
UOUT
UOUT
DC
UIN
RJ45
UOUT
24 V/10 A Output
UR20-FBC-MOD-TCP
A.14
2429060000 – 2016
Field bus coupler
Modbus-TCP
UR20-FBC-MOD-TCP
IP 20
•2 x 10 A current paths
•Various Modbus services
•Web server
•System supply of 64 I/O modules
•Temperature range –20… +60 °C
A
Technical data
System data
Connection
Field bus protocol
Process data
Parameter data
Diagnostic data
Max. number of modules
Configuration interface
Transmission rate of field bus
Transmission speed of u-remote system bus
Supply
Supply voltage for system and inputs
Supply voltage for outputs
Feed current for input modules, max.
Feed current for output modules, max.
Current consumption (IIN in power segment of field bus coupler), typ.
General data
Weight
Dimensions (H/W/D)
Ordering data
Module variants
Field bus coupler, Modbus TCP
Note
Accessories
Coding elements
Termination kit
Swivel marker
Connection marker for pusher custom printing
Connection marker for pusher neutral
Module marker for custom printing
Module marker for neutral
Thermotransfer version (Material: Polyester)
Thermotransfer version (Material: Polyester)
Paper version for Laserprinter
USB cable (USB A to Micro USB)
Replacement parts
Plug-in connector unit
Note
2 x RJ-45
Modbus TCP
8 kBytes
1.024 Bytes
1.024 Bytes
64
Micro USB 2.0
100 Mbps
48 Mbps
TD+ 1
TD– 2
RD+ 3
RD– 6
TD+ 1
TD– 2
RD+ 3
RD– 6
24 V DC +20 % / –15 %
24 V DC +20 % / –15 %
10 A
10 A
112 mA
Qty.
1
Order No.
1334930000
Qty.
100
5
20
192
960
100
500
1
1
10
1
Order No.
1483050000
1346610000
1339920000
1323700000
1323710000
1341610000
1341630000
1429910000
1429420000
1429430000
1487980000
5
1484130000
MOD
X2
24 V DC IN
24 V DC IN
GND IN
GND IN
24 V DC OUT
24 V DC OUT
GND OUT
GND OUT
220 g
120 mm (with catch lever 128 mm) x 52 mm x 76 mm
Type
UR20-FBC-MOD-TCP
X1
A termination kit (UR20-EBK-ACC) is included
in the coupler package
Type
KOSM BHZ5.00
UR20-EBK-ACC
UR20-SM-ACC
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC NE WS
DEK 5/8-11.5 MC SDR
DEK 5/8-11.5 MC NE WS
THM UR20 GE *1)
THM UR20 WS *1)
ESO UR20 DIN A4 WS *2)
IE-C6FP8LE0015M40M40-E
UR20-PK-1334930000-SP
Product standard
EMC
ATEX
UL
MSIP
IEC 61131-2
EN 61000
EN 60079
UL 508
MSIP-REM-WMG-1334930000
*1) 1 roll = 1000 label = 1 Qty.
*2) 1 sheet = 60 label = 1 Qty.
Let’s connect.
2429060000 – 2016
A.15
IP 20
Field bus coupler
A
EtherNet/IP field bus coupler
Web server tool;
two RJ45 Ports; 100 Mbps
EtherNet/IP™ is a widespread, real-time capable Industrial Ethernet fieldbus
system.
It is based on standard Ethernet technology such as TCP and UDP so it provides
in addition to the transmission of unicast messages between two participants,
the possibility of sending I/O data via multicast cyclically to multiple recipients.
The UR20-FBC-EIP from Weidmüller is a field bus coupler designed in accordance
with IEC 61158 and is an EtherNet/IP participant. With options for connecting up
to 64 u-remote participants, it serves as the head module for the u-remote system
bus.
The coupler can be activated with a system-independent web server application
via the USB service interface or the Ethernet ports. All information such as
diagnoses, status values and parameters can therefore be read out. All connected
inputs can also be simulated or outputs set. The system's initial power supply
is already integrated in the field bus coupler. Power is supplied via two 4-pin
connectors, separated into the input and output current paths.
Since the EtherNet/IP products from Weidmüller make full use of all the latest
technological possibilities, such as diagnosis options, they actively support your
application in the most important tasks – from engineering and commissioning to
fault diagnosis.
More Performance. Simplified.
Block diagram UR20-FBC-EIP
USB
8x
µC
Internal from the control card
System
bus
RJ45
RJ45
24 V/10 A Input
DC
24 V/10 A Output
System
bus
System
bus
USYS
USYS
UIN
UIN
UOUT
UOUT
DC
UIN
UOUT
UR20-FBC-EIP
A.16
2429060000 – 2016
Field bus coupler
Ethernet/IP
UR20-FBC-EIP
IP 20
•2 x 10 A current paths
•Web server
•System supply of 64 I/O modules
•Temperature range –20… +60 °C
A
Technical data
System data
Connection
Field bus protocol
Process data
Parameter data
Diagnostic data
Max. number of I/O modules
Configuration interface
Transmission rate of field bus
Transmission speed of u-remote system bus
Supply
Supply voltage for system and inputs
Supply voltage for outputs
Feed current for input modules, max.
Feed current for output modules, max.
Current consumption (IIN in power segment of field bus coupler), typ.
General data
Weight
Dimensions (H/W/D)
Note
Ordering data
Module variants
Field bus coupler, EtherNet/IP
Note
Accessories
Coding elements
Termination kit
Swivel marker
Connection marker for pusher custom printing
Connection marker for pusher neutral
Module marker for custom printing
Module marker for neutral
Thermotransfer version (Material: Polyester)
Thermotransfer version (Material: Polyester)
Paper version for Laserprinter
USB cable (USB A to Micro USB)
Replacement parts
Plug-in connector unit
Note
2 x RJ-45
Ethernet/IP
max. 2*494 Byte
max. 64*64 Byte
max. 64*47 Byte
64
Micro USB 2.0
100 Mbps
48 Mbps
TD+ 1
TD– 2
RD+ 3
RD– 6
TD+ 1
TD– 2
RD+ 3
RD– 6
24 V DC +20 % / –15 %
24 V DC +20 % / –15 %
10 A
10 A
112 mA
Download of EDS-file on www.weidmueller.com
Qty.
1
Order No.
1334920000
Qty.
100
5
20
192
960
100
500
1
1
10
1
Order No.
1483050000
1346610000
1339920000
1323700000
1323710000
1341610000
1341630000
1429910000
1429420000
1429430000
1487980000
5
1541290000
EIP
X2
24V DC IN
24V DC IN
GND IN
GND IN
24V DC OUT
24V DC OUT
GND OUT
GND OUT
220 g
120 mm (with catch lever 128 mm) x 52 mm x 76 mm
Type
UR20-FBC-EIP
X1
A termination kit (UR20-EBK-ACC) is
included in the coupler package
Type
KOSM BHZ5.00
UR20-EBK-ACC
UR20-SM-ACC
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC NE WS
DEK 5/8-11.5 MC SDR
DEK 5/8-11.5 MC NE WS
THM UR20 GE *1)
THM UR20 WS *1)
ESO UR20 DIN A4 WS *2)
IE-C6FP8LE0015M40M40-E
UR20-PK-1334920000-SP
Product standard
EMC
ATEX
UL
IEC 61131-2
EN 61000
EN 60079
UL 508
*1) 1 roll = 1000 label = 1 Qty.
*2) 1 sheet = 60 label = 1 Qty.
Let’s connect.
2429060000 – 2016
A.17
IP 20
Field bus coupler
A
DeviceNet field bus coupler
Web server tool;
PCB plug-in connector
DeviceNet is a serial, CAN-based fieldbus system, which was developed by AllenBradley and later on passed as an open standard to the ODVA (Open DeviceNet
Vendor Association). Today it is used worldwide in automation technology.
Classical can DeviceNet operated with a maximum of 64 network nodes per
fieldbus segment. The fieldbus coupler UR20-FBC-DN is connected via a 5-pin
PCB connector to the network. With options for connecting up to 64 u-remote
participants, it serves as the head module for the u-remote system bus.
The coupler can be activated with a system-independent web server application
via the USB service interface. All information, such as diagnoses, status values
and parameters, can therefore be read out. All connected inputs can also be
simulated or outputs set. The initial system power supply is already integrated in
the field bus coupler. Power is supplied via two 4-pin connectors, separated into
the input and output current paths.
Since the DeviceNet products from Weidmüller make full use of all the latest
technological possibilities, such as diagnosis options, they actively support your
application in the most important tasks – from engineering and commissioning to
fault diagnosis.
More Performance. Simplified.
Block diagram UR20-FBC-DN
USB
8x
µC
System
bus
Internal from the control card
5 pole
socket
24 V/10 A Input
DC
System
bus
System
bus
USYS
USYS
UIN
UIN
UOUT
UOUT
DC
UIN
UOUT
24 V/10 A Output
UR20-FBC-DN
A.18
2429060000 – 2016
Field bus coupler
DeviceNet
UR20-FBC-DN
IP 20
•2 x 10 A current paths
•Web server
•System supply of 64 I/O modules
•Temperature range -20… +60 °C
A
Technical data
System data
Connection
Field bus protocol
Process data
Parameter data
Diagnostic data
Max. number of I/O modules
Configuration interface
Transmission rate of field bus
Transmission speed of u-remote system bus
Supply
Supply voltage for system and inputs
Supply voltage for outputs
Feed current for input modules, max.
Feed current for output modules, max.
Current consumption (IIN in power segment of field bus coupler), typ.
General data
Weight
Dimensions (H/W/D)
Note
Ordering data
Module variants
Field bus coupler, DeviceNet
Note
Accessories
Coding elements
Termination kit
Swivel marker
Connection marker for pusher custom printing
Connection marker for pusher neutral
Module marker for custom printing
Module marker for neutral
Thermotransfer version (Material: Polyester)
Thermotransfer version (Material: Polyester)
Paper version for Laserprinter
USB cable (USB A to Micro USB)
PCB plug-in connector, socket plug, 5 pole, 10 pin
PCB plug-in connector, socket plug, 5 pole, 5 pin
Replacement parts
Plug-in connector unit
Note
Socket for 5-pole PCB plug-in connector
DeviceNet
1008 Byte
64*64 Byte = 4 KB
64*47 Byte
64
Micro USB 2.0
max. 500 kBit/s
max. 48 Mbps
DN
V+
C_H
SHLD
C_L
V–
24 V DC +20 % / -15 %
24 V DC +20 % / -15 %
10 A
10 A
75 mA (+ 15 mA from DeviceNet supply)
X1
24 V DC IN
24 V DC IN
GND IN
GND IN
24 V DC OUT
24 V DC OUT
GND OUT
GND OUT
225 g
120 mm (with catch lever128 mm) x 52 mm x 76 mm
Download of EDS-file on www.weidmueller.com
Type
UR20-FBC-DN
Qty.
1
Order No.
1334900000
Qty.
100
5
20
192
960
100
500
1
1
10
1
50
50
Order No.
1483050000
1346610000
1339920000
1323700000
1323710000
1341610000
1341630000
1429910000
1429420000
1429430000
1487980000
1919990000
1933550000
5
2003540000
A termination kit (UR20-EBK-ACC)
is included in the coupler package
Type
KOSM BHZ5.00
UR20-EBK-ACC
UR20-SM-ACC
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC NE WS
DEK 5/8-11.5 MC SDR
DEK 5/8-11.5 MC NE WS
THM UR20 GE *1)
THM UR20 WS *1)
ESO UR20 DIN A4 WS *2)
IE-C6FP8LE0015M40M40-E
BLDZ DN5.08/05/180F GY BX PRT
BLZ DN 5.08/05/180F AU GY BX PRT
UR20-PK-1334900000-SP
Product standard
EMC (in preparation)
ATEX (in preparation)
UL (in preparation)
MSIP (in preparation)
IEC 61131-2
EN 61000
EN 60079
UL 61010-2-201
MSIP-REM-WMG-1334900000
*1) 1 roll = 1000 label = 1 Qty.
*2) 1 sheet = 60 label = 1 Qty.
Let’s connect.
2429060000 – 2016
A.19
IP 20
Field bus coupler
A
CAN field bus coupler
Web server tool;
Sub-D connection
The CAN bus (Controller Area Network) is a serial fieldbus, which was introduced
in 1983 by Bosch and Intel. Due to the good characteristics it is particularly
suitable for applications where high data security is required. The fieldbus coupler
UR20-FBC-CAN uses the CAN based Layer 7 communication protocol CANopen,
the device profile CiA DS401 for digital and analog I/O modules is supported.
With options for connecting up to 64 u-remote participants, it serves as the head
module for the u-remote system bus.
The coupler can be activated with a system-independent web server application
via the USB service interface. All information, such as diagnoses, status values
and parameters, can therefore be read out. All connected inputs can also be
simulated or outputs set. The initial system power supply is already integrated in
the field bus coupler. Power is supplied via two 4-pin connectors, separated into
the input and output current paths.
Since the CANopen products from Weidmüller make full use of all the latest
technological possibilities, such as diagnosis options, they actively support your
application in the most important tasks – from engineering and commissioning to
fault diagnosis.
More Performance. Simplified.
Block diagram UR20-FBC-CAN
USB
8x
µC
System
bus
Internal from the control card
Sub-D
24 V/10 A Input
DC
System
bus
System
bus
USYS
USYS
UIN
UIN
UOUT
UOUT
DC
UIN
UOUT
24 V/10 A Output
UR20-FBC-CAN
A.20
2429060000 – 2016
Field bus coupler
CANopen
UR20-FBC-CAN
IP 20
•2 x 10 A current paths
•Web server
•System supply of 64 I/O modules
•Temperature range -20… +60 °C
A
Technical data
System data
Connection
Field bus protocol
Process data
Parameter data
Diagnostic data
Max. number of I/O modules
Configuration interface
Transmission rate of field bus
Transmission speed of u-remote system bus
Supply
Supply voltage for system and inputs
Supply voltage for outputs
Feed current for input modules, max.
Feed current for output modules, max.
Current consumption (IIN in power segment of field bus coupler), typ.
General data
Weight
Dimensions (H/W/D)
Note
Ordering data
Module variants
Field bus coupler, CANopen
Note
Accessories
Coding elements
Termination kit
Swivel marker
Connection marker for pusher custom printing
Connection marker for pusher neutral
Module marker for custom printing
Module marker for neutral
Thermotransfer version (Material: Polyester)
Thermotransfer version (Material: Polyester)
Paper version for Laserprinter
USB cable (USB A to Micro USB)
Replacement parts
Plug-in connector unit
Note
9-pole Sub-D socket
CANopen
488 Byte
244 Byte
244 Byte
64
Micro USB 2.0
max. 1 Mbps
max. 48 Mbps
CAN
CANL
GND
Shield
GND
CANH
24 V DC +20 % / -15 %
24 V DC +20 % / -15 %
10 A
10 A
90 mA
2
3
5
6
7
9
Download of EDS-file on www.weidmueller.com
Qty.
1
Order No.
1334890000
Qty.
100
5
20
192
960
100
500
1
1
10
1
Order No.
1483050000
1346610000
1339920000
1323700000
1323710000
1341610000
1341630000
1429910000
1429420000
1429430000
1487980000
5
2003530000
5
X1
24 V DC IN
24 V DC IN
GND IN
GND IN
24 V DC OUT
24 V DC OUT
GND OUT
GND OUT
227 g
120 mm (with catch lever128 mm) x 52 mm x 76 mm
Type
UR20-FBC-CAN
1
6
A termination kit (UR20-EBK-ACC)
is included in the coupler package
Type
KOSM BHZ5.00
UR20-EBK-ACC
UR20-SM-ACC
PM 2.7/2.6 MC SDR
PM 2.7/2.6 MC NE WS
DEK 5/8-11.5 MC SDR
DEK 5/8-11.5 MC NE WS
THM UR20 GE *1)
THM UR20 WS *1)
ESO UR20 DIN A4 WS *2)
IE-C6FP8LE0015M40M40-E
UR20-PK-1334890000-SP
Product standard
EMC (in preparation)
ATEX (in preparation)
UL (in preparation)
MSIP (in preparation)
IEC 61131-2
EN 61000
EN 60079
UL 61010-2-201
MSIP-REM-WMG-1334890000
*1) 1 roll = 1000 label = 1 Qty.
*2) 1 sheet = 60 label = 1 Qty.
Let’s connect.
2429060000 – 2016
A.21