C R POSITIVE PRESSURE (P1) M B –A– N PIN 1 SEATING PLANE 1 2 3 4 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION –A– IS INCLUSIVE OF THE MOLD STOP RING. MOLD STOP RING NOT TO EXCEED 16.00 (0.630). DIM A B C D F G J L M N R S L 6 –T– G J S F D 6 PL 0.136 (0.005) STYLE 1: PIN 1. 2. 3. 4. 5. 6. VOUT GROUND VCC V1 V2 VEX STYLE 2: PIN 1. 2. 3. 4. 5. 6. M OPEN GROUND –VOUT VSUPPLY +VOUT OPEN T A M STYLE 3: PIN 1. 2. 3. 4. 5. 6. INCHES MIN MAX 0.595 0.630 0.514 0.534 0.200 0.220 0.027 0.033 0.048 0.064 0.100 BSC 0.014 0.016 0.695 0.725 30 _NOM 0.475 0.495 0.430 0.450 0.090 0.105 MILLIMETERS MIN MAX 15.11 16.00 13.06 13.56 5.08 5.59 0.68 0.84 1.22 1.63 2.54 BSC 0.36 0.40 17.65 18.42 30 _NOM 12.07 12.57 10.92 11.43 2.29 2.66 OPEN GROUND +VOUT +VSUPPLY –VOUT OPEN CASE 867–08 ISSUE N DATE 12/12/96