–A– 32 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH. MAXIMUM MOLD FLASH 0.25 (0.010). 17 –B– 1 16 L C –T– SEATING PLANE K E F N M G D 32 PL 0.25 (0.010) M T A S J 32 PL 0.25 (0.010) M T B INCHES DIM MIN MAX A 1.635 1.665 B 0.530 0.550 C 0.155 0.200 D 0.014 0.022 E 0.050 BSC F 0.040 0.060 G 1.00 BSC J 0.008 0.015 K 0.115 0.135 L 0.600 BSC M 0_ 15_ N 0.020 0.040 MILLIMETERS MIN MAX 41.35 42.24 13.47 13.97 3.94 5.08 0.36 0.55 1.27 BSC 1.02 1.52 2.54 BSC 0.21 0.38 2.93 3.42 15.24 BSC 0_ 15_ 0.51 1.01 S CASE 850–01 ISSUE A DATE 09/19/89