FRDM STBCP3115 FRDM STBCP3115 FRDMSTBC-P3115 For more information, visit freescale.com/ sensortoolbox Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. © 2015 Freescale Semiconductor, Inc. FRDMSTBCP3115QRC REV 1 920-28981 REV A Get Started Download tools and documentation under Jump-Start Your Design at freescale.com/ sensortoolbox Quick Reference Card Pressure Sensor Toolbox Development Board MPL3115A2 I2C precision altimeter sensor FREESCALE FREEDOM PLATFORM 3 4 5 Connect the FRDMSTBC-P3115 development board to a Freescale Freedom development board, such as the FRDM-KL25Z (or any Arduino R3 compatible board). Refer to the Freescale Freedom development board Quick Start Guide for driver information. 6 – I2C_SCL1 5 – I2C_SDA1 INT_2 – 3 INT_1 – 6 7 – GND 6 – GND Plug one end of a USB cable into the SDA port on the assembly. Plug the other end of the cable into the USB port on the computer. Download and install the latest Sensor Toolbox software at: freescale.com/sensortoolbox 4 – VDD 2 – VDD GND – 7 I2C_SDA0 – 9 I2C_SCL0 – 10 Start the Sensor Toolbox software. Through hole pins (8 places) Test points (7 places) Learn more at freescale.com/sensortoolbox 2 MPL3115A2 I2C precision altimeter 8 LGA (5 mm x 3 mm x 1.1 mm) Verify package contents: FRDMSTBC-P3115 development board Get to Know the FRDMSTBC-P3115 1